10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

Spindle Motor And Inverter. Steam Generator For Bath. You may also like. 220V 30MPa Air Compressor Pump PCP Electric High Pressure System Rifle Hot Sale. Black Pouch Hard Disk HDD 2.5 Zipper Protection Bag WD Case Drive Seagate For. 304# Stainless Steel Cow Milking Machine Bucket Tank Barrel Portable. HOT 8 x 16 750W Variable-Speed Mini Metal Lathe Bench Top Digital. Cleaner Removal Easy Ear Wax Swab Ear wax Remover Spiral Soft Ear pick Tool Top. HOT Silver Metal New Auto Part Engine Car Keychain Keyfob Piston Model Alloy. 10” 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade. The bandsaw is intended for the slitting and crosscutting of timber or wood-like workpieces. Round materials may only be cut with suitable holding devices. A compact floor standing woodworking bandsaw with a massive cutting capacity, for a machine of this cutting depth of 120mm(4.7). The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The bandsaw has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table. The cast iron table tilts from 0 degree to 45 degrees and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. Rapid tension/tape release lever. Guiding on toothed strips with a millimetre scale makes it possible to precisely set upper band guiding. T-square of the band saw with a lock on the eccentric and equipment for parallel cutting. Made up of cast iron, precise table of ground and polished surface. Legible band tension indicator. Bilateral band guiding greatly improves its durability. Mains powered LED work Light. Quick action lock on rip fence. Wear a breathing mask. Rated Voltage: 220V 50Hz. Rated Input Power: 420W. Height: 120mm(4.7in). Width: 245mm(9.6in). Blade Length: 1,790mm(70.5in). Blade Width: 6-13mm(0.24-0.51in). Blade Speed: 11m/s(660-960m/min). Worktable Size: 300x300mm(11.8×11.8in). LPA Sound Pressure Level: 92.7 dB(A). LWA Sound Power Level: 102.3 dB(A). Package Size: 89x45x35cm(35×17.7×13.8in). Other Accessories as Shown in the Picture. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. At present, our company has warehouses in. NO tariffs within EU countries. According to the different location, transport time will range from 2 to 7 workdays. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. The item “10” 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade” is in sale since Monday, November 23, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Band Saws”. The seller is “chinayoungenjoy” and is located in Prague. This item can be shipped worldwide.
  • Battery Included: No
  • Blade Diameter: 0.24-0.51in
  • Blade Length: 70.5in
  • Blade Speed: 11m/s(660-960m/min)
  • Blade Strength: High
  • Blade Width: 0.24-0.51in
  • Brand: Taishi
  • Color: Blue
  • Colour: Blue
  • Country/Region of Manufacture: China
  • Cutting Angle: 45°
  • G.W.: 68lbs
  • LPA Sound Pressure Level: 92.7 dB(A)
  • LWA Sound Power Level: 102.3 dB(A)
  • Model: TS-03
  • MPN: LTS2020090802
  • N.W.: 66.13lbs
  • Number of Items in Set: 1
  • Package Size: 35×17.7×13.8in
  • Power Source: Corded Electric
  • Processing Scope Max. Height: 4.7in
  • Processing Scope Max. Width: 9.6in
  • Rated Input Power: 420W
  • Saw Specification: 1790×6-13mm
  • Saw Wheel Dia.: 10in
  • Set Includes: Blades
  • Suitable For: Wood
  • Type: Table Saw
  • Voltage: 220 50Hz
  • Working Mode: Semi-Auto
  • Worktable Size: 11.8×11.8in
  • Worktable Tilt: 0-45°
220V 10'' Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

220V 10'' Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

220V 10'' Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

220V 10'' Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

220V 10'' Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

220V 10'' Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

220V 10'' Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

220V 10'' Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

220V 10'' Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

220V 10'' Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

220V 10'' Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

220V 10'' Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade

Spindle Motor and Inverter VFD. You may also like. 30MPa Air Compressor Pump PCP Electric High Pressure System Rifle Hot Sale 220V. Cleaner Removal Easy Ear Wax Swab Ear wax Remover Spiral Soft Ear pick Tool. 3 Sets Mold 220V Commercial Automatic Donut Maker Making Machine Wide Oil Tank. 3 Flavor Soft Ice Cream Machine Commercial Frozen Yogurt Cone Maker 1200W. NEW ITEM 8 x 16 750W Variable-Speed Mini Metal Lathe Bench Top Digital. 220V 10” Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade. The bandsaw is intended for the slitting and crosscutting of timber or wood-like workpieces. Round materials may only be cut with suitable holding devices. A compact floor standing woodworking bandsaw with a massive cutting capacity, for a machine of this cutting depth of 120mm(4.7). The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The bandsaw has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table. The cast iron table tilts from 0 degree to 45 degrees and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. Rapid tension/tape release lever. Guiding on toothed strips with a millimetre scale makes it possible to precisely set upper band guiding. T-square of the band saw with a lock on the eccentric and equipment for parallel cutting. Made up of cast iron, precise table of ground and polished surface. Legible band tension indicator. Bilateral band guiding greatly improves its durability. Mains powered LED work Light. Quick action lock on rip fence. Wear a breathing mask. Rated Voltage: 220V 50Hz. Rated Input Power: 420W. Height: 120mm(4.7in). Width: 245mm(9.6in). Blade Length: 1,790mm(70.5in). Blade Width: 6-13mm(0.24-0.51in). Blade Speed: 11m/s(660-960m/min). Worktable Size: 300x300mm(11.8×11.8in). LPA Sound Pressure Level: 92.7 dB(A). LWA Sound Power Level: 102.3 dB(A). Package Size: 89x45x35cm(35×17.7×13.8in). Other Accessories as Shown in the Picture. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. At present, our company has warehouses in. NO tariffs within EU countries. According to the different location, transport time will range from 2 to 7 workdays. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. The item “220V 10” Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade” is in sale since Monday, November 23, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Band Saws”. The seller is “chinaequipment1982″ and is located in Prague. This item can be shipped worldwide.
  • Battery Included: No
  • Blade Diameter: 0.24-0.51in
  • Blade Length: 70.5in
  • Blade Speed: 11m/s(660-960m/min)
  • Blade Strength: High
  • Blade Width: 0.24-0.51in
  • Brand: Taishi
  • Color: Blue
  • Colour: Blue
  • Country/Region of Manufacture: China
  • Cutting Angle: 45°
  • G.W.: 68lbs
  • LPA Sound Pressure Level: 92.7 dB(A)
  • LWA Sound Power Level: 102.3 dB(A)
  • Model: TS-03
  • MPN: LTS2020090802
  • N.W.: 66.13lbs
  • Number of Items in Set: 1
  • Package Size: 35×17.7×13.8in
  • Power Source: Corded Electric
  • Processing Scope Max. Height: 4.7in
  • Processing Scope Max. Width: 9.6in
  • Rated Input Power: 420W
  • Saw Specification: 1790×6-13mm
  • Saw Wheel Dia.: 10in
  • Set Includes: Blades
  • Suitable For: Wood
  • Type: Table Saw
  • Voltage: 220 50Hz
  • Working Mode: Semi-Auto
  • Worktable Size: 11.8×11.8in
  • Worktable Tilt: 0-45°
Portable Tabletop Saw with Steel Rip Fence & 10-Piece T-Shank Jig Saw Blade Set

Portable Tabletop Saw with Steel Rip Fence & 10-Piece T-Shank Jig Saw Blade Set. Traditional guard and riving knife system allows unlimited capacity for cross and rip cuts. Easy to carry anywhere. Sets up in seconds to cut wood, tile, plastic, metal and aluminum. The product is 10PC T-Shank Jig Blade. The product is manufactured in China. In addition to offering great prices on premium products, we pride ourselves in our ongoing commitment to super duper Customer Service! We strive to be fair and honest with all of our customers and we make your satisfaction our top priority, including listening to each of our customers as to what they feel is the fair thing to do in unique return situations. We have a deeply belief that everyone that we sell our products to should be happy with how they are treated by us. We enjoy making longtime customers in this business, and we have learned the best way to do so is by selecting the best products at the best prices, and by treating our customers with the same fairness we would want from our own family. Thanks for stopping by! For over a decade, we have been carefully selecting an inventory of high quality Beauty Health & Wellness products and other Home Goods that we can offer at unbeatable prices. We have built a team of expert shopping analysts that carefully select only the highest quality and best reviewed products for your home and family. Be sure to use the Search Box that is next to the’Search Store’ button above to browse through the many other items we have for sale. The item “Portable Tabletop Saw with Steel Rip Fence & 10-Piece T-Shank Jig Saw Blade Set” is in sale since Wednesday, September 11, 2019. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Other Collectible Tools”. The seller is “integritybooksales” and is located in Nashville, TN. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Type: Table Saws
  • Brand: Does Not Apply
Ryobi RTS10 Table Saw Replacement Parts Miter Fence Blade Guard Stand Legs

Ryobi RTS10 Table Saw Replacement Parts Miter Fence Blade Guard Stand Legs

Ryobi RTS10 Table Saw Replacement Parts Miter Fence Blade Guard Stand Legs

Ryobi RTS10 Table Saw Replacement Parts Miter Fence Blade Guard Stand Legs

Comes with everything shown. It looks like the stand is complete including hardware. You have the blade guard, handle, miter, bevel wheel knob plus a few more parts. The item “Ryobi RTS10 Table Saw Replacement Parts Miter Fence Blade Guard Stand Legs” is in sale since Saturday, November 7, 2020. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tool & Air Tool Replacement Parts”. The seller is “trammellfan03″ and is located in Xenia, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Russian federation.
  • Brand: Ryobi
  • Part Type: Guard
Lumberjack 8 Bench Table Saw with Stand Side Extentions Fence & TCT Blade 240V

Lumberjack 8 Bench Table Saw with Stand Side Extentions Fence & TCT Blade 240V

Lumberjack 8 Bench Table Saw with Stand Side Extentions Fence & TCT Blade 240V

Lumberjack 8 Bench Table Saw with Stand Side Extentions Fence & TCT Blade 240V. Only once for cutting some Boards Dont need it now great saw. The item “Lumberjack 8 Bench Table Saw with Stand Side Extentions Fence & TCT Blade 240V” is in sale since Wednesday, August 5, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “nibbles2018″ and is located in glasgow. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Dominican republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, El salvador, Trinidad and tobago, Uruguay.
  • Set Includes: Stand
  • Brand: Lumberjack
  • Cutting Depth: 70 mm
  • Model: TS210SL
  • Type: Table Saw
  • Bundle Description: Blade Pushstick Full length Rip fence Mitre Gauge
  • Blade Diameter: 210 mm
  • Blade Location: Centered
  • Blade Diameter (mm): 210
  • Power Source: Corded Electric
  • Suitable For: Wood
  • Custom Bundle: Yes
  • Voltage: 240 V
  • Manufacturer Warranty: 1 year
  • MPN: TS210SL
10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth

10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth

10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth

10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth

10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth

10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth

10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth

10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth

10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth

10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth

10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth

10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth

10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth. The bandsaw is intended for the slitting and crosscutting of timber or wood-like workpieces. Round materials may only be cut with suitable holding devices. A compact floor standing woodworking bandsaw with a massive cutting capacity, for a machine of this cutting depth of 120mm(4.7). The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The bandsaw has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table. The cast iron table tilts from 0 degree to 45 degrees and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. Rapid tension/tape release lever. Guiding on toothed strips with a millimetre scale makes it possible to precisely set upper band guiding. T-square of the band saw with a lock on the eccentric and equipment for parallel cutting. Made of cast iron, precise table of ground and polished surface. Legible band tension indicator. Bilateral band guiding greatly improves its durability. Mains powered LED work Light. Quick action lock on rip fence. Wear a breathing mask. Height: 120mm(4.7in). Width: 245mm(9.6in). Blade Length: 1,790mm(70.5in). Blade Width: 6-13mm(0.24-0.51in). Rated Voltage: 220V 50Hz. Rated Input Power: 420W. Blade Speed: 11m/s(660-960m/min). Worktable Size: 300x300mm(11.8×11.8in). LPA Sound Pressure Level: 92.7 dB(A). LWA Sound Power Level: 102.3 dB(A). Package Size: 89x45x35cm(35×17.7×13.8in). 1 × Base Frame. 1 × Machine Worktable. 1 × Push Stick. 1 × Parallel Stop. Other Accessories as Shown in the Picture. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. We now have warehouses in Germany. Note: American regional AK, HI, PR , are remote areas, these places need to be extra charged. F your address is too remote to achieve, there will an extra remote surcharge occurs. Please also pay attention to that, thanks. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. 220V 30MPa Air Compressor Pump PCP Electric High Pressure System Rifle EU Stock. 3KW Steam Generator Multi-Functional Sauna Bath Home SPA Shower Bathroom Cabinet. Good 5 pcs 3/8 Holder Mini Lathe Set & Indexable Carbide C6 Insert Tool Bit NEW. 34 Stainless Steel Pet Dog Cat Bathing Wash Shower Grooming Bath Tub w/Stairs. 220V 320mm Digital Vacuum Packing Sealing Machine Sealer Commercial Food Chamber. 2.2KW ER20 Water Cooled Spindle Motor & Matching Frequency Inverter Total 1 set. The item “10 Woodworking Bandsaw with Cast Table Fence & Blade 120mm Cutting Depth” is in sale since Wednesday, July 1, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Band Saws”. The seller is “lakago-life” and is located in Prague. This item can be shipped worldwide.
  • Blade Length: 70.5in
  • Blade Speed: 11m/s(660-960m/min)
  • Blade Width: 0.24-0.51in
  • Brand: lakago
  • Colour: Green
  • Country/Region of Manufacture: China
  • G.W.: 68lbs
  • LPA Sound Pressure Level: 92.7 dB(A)
  • LWA Sound Power Level: 102.3 dB(A)
  • N.W.: 66.13lbs
  • Package Size: 35×17.7×13.8in
  • Power Source: Corded Electric
  • Processing Scope Max. Height: 4.7in
  • Processing Scope Max. Width: 9.6in
  • Rated Input Power: 420W
  • Saw Specification: 1790×6-13mm
  • Saw Wheel Dia.: 10in
  • Set Includes: Blades
  • Suitable For: Wood
  • Type: Table Saw
  • Voltage: 220 50Hz
  • Working Mode: Semi-Auto
  • Worktable Size: 11.8×11.8in
  • Worktable Tilt: 0-45°
220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s

220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s

220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s

220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s

220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s

220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s

220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s

220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s

220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s

220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s

220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s

220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s

The bandsaw is intended for the slitting and crosscutting of timber or wood-like workpieces. Round materials may only be cut with suitable holding devices. A compact floor standing woodworking bandsaw with a massive cutting capacity, for a machine of this cutting depth of 120mm(4.7). The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The bandsaw has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table. The cast iron table tilts from 0 degree to 45 degrees and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. Rapid tension/tape release lever. Guiding on toothed strips with a millimetre scale makes it possible to precisely set upper band guiding. T-square of the band saw with a lock on the eccentric and equipment for parallel cutting. Made of cast iron, precise table of ground and polished surface. Legible band tension indicator. Bilateral band guiding greatly improves its durability. Mains powered LED work Light. Quick action lock on rip fence. Wear a breathing mask. Height: 120mm(4.7in). Width: 245mm(9.6in). Blade Length: 1,790mm(70.5in). Blade Width: 6-13mm(0.24-0.51in). Rated Voltage: 220V 50Hz. Rated Input Power: 420W. Blade Speed: 11m/s(660-960m/min). Worktable Size: 300x300mm(11.8×11.8in). LPA Sound Pressure Level: 92.7 dB(A). LWA Sound Power Level: 102.3 dB(A). Package Size: 89x45x35cm(35×17.7×13.8in). 1 × Base Frame. 1 × Machine Worktable. 1 × Push Stick. 1 × Parallel Stop. Other Accessories as Shown in the Picture. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. We now have warehouses in the United Kingdom. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests; 4. 2pcs 3 Wing Router Bit Slot Cutter 1/2 &1/4 inch Shank Adjustable Woodworking EU. Woodworking Router Bits Set 1/2 Shank Tungsten Carbide Tip Rotary Tool with Box. ER32 MT2 Collet Chuck Holder Wrench Morse Taper Shank CNC Milling Lathe. 2 in 1 Spot Welder 1.9KW Welding Machine 709A Iron Soldering Staion Battery 60A. 220V 10KG Table Rotary Welding Positioner 0-90° Turntable 2.5 3 Jaw Lathe Chuck. 15pcs Router Bit Set Tugsten Carbide 1/2 Shank Wood Cutting Tool Set 12.7mm. The item “220V 10 Woodworking Bandsaw with Cast Table Solid Fence & Blade 300x300mm 11m/s” is in sale since Monday, June 15, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Band Saws”. The seller is “industry-commerce” and is located in Prague. This item can be shipped worldwide.
  • Blade Length: 70.5in
  • Blade Speed: 11m/s(660-960m/min)
  • Blade Width: 0.24-0.51in
  • Brand: Taishi
  • Colour: Green
  • Country/Region of Manufacture: China
  • G.W.: 68lbs
  • LPA Sound Pressure Level: 92.7 dB(A)
  • LWA Sound Power Level: 102.3 dB(A)
  • N.W.: 66.13lbs
  • Package Size: 35×17.7×13.8in
  • Power Source: Corded Electric
  • Processing Scope Max. Height: 4.7in
  • Processing Scope Max. Width: 9.6in
  • Rated Input Power: 420W
  • Saw Specification: 1790×6-13mm
  • Saw Wheel Dia.: 10in
  • Set Includes: Blades
  • Suitable For: Wood
  • Type: Table Saw
  • Voltage: 220 50Hz
  • Working Mode: Semi-Auto
  • Worktable Size: 11.8×11.8in
  • Worktable Tilt: 0-45°
220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10

220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10

220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10

220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10

220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10

220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10

220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10

220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10

220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10

220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10

220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10

220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10

Spindle Motor and Inverter. Sports & Outdoors Kits. Steam Generator for Bath. Welding and Polishing Machine. NOT for sale for Winit and 4PX. You may also like. 2.2KW ER20 Four Bearing Air Cooled Spindle Motor & 2.2KW Inverter Drive VFD CNC. FR-900 Automatic Horizontal Continuous Plastic Bag/Band Sealing Machine Sealer. 220V 983A Automatic Glue Dispenser Solder Paste Liquid Controller Dropper. 3KW 220V 4HP 13A Variable Frequency Drive Inverter VFD Huanyang. New 2KG Automatic Melting Furnace of Metals + Pour Bar + Digital Controller. Brand New 6KW Steam Generator for Home SPA Sauna Bath Shower + The Controller. 220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10. The bandsaw is intended for the slitting and crosscutting of timber or wood-like workpieces. Round materials may only be cut with suitable holding devices. A compact floor standing woodworking bandsaw with a massive cutting capacity, for a machine of this cutting depth of 120mm(4.7). The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The bandsaw has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table. The cast iron table tilts from 0 degree to 45 degrees and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. Rapid tension/tape release lever. Guiding on toothed strips with a millimetre scale makes it possible to precisely set upper band guiding. T-square of the band saw with a lock on the eccentric and equipment for parallel cutting. Made of cast iron, precise table of ground and polished surface. Legible band tension indicator. Bilateral band guiding greatly improves its durability. Mains powered LED work Light. Quick action lock on rip fence. Wear a breathing mask. Height: 120mm(4.7in). Width: 245mm(9.6in). Blade Length: 1,790mm(70.5in). Blade Width: 6-13mm(0.24-0.51in). Rated Voltage: 220V 50Hz. Rated Input Power: 420W. Blade Speed: 11m/s(660-960m/min). Worktable Size: 300x300mm(11.8×11.8in). LPA Sound Pressure Level: 92.7 dB(A). LWA Sound Power Level: 102.3 dB(A). Package Size: 89x45x35cm(35×17.7×13.8in). 1 × Base Frame. 1 × Machine Worktable. 1 × Push Stick. 1 × Parallel Stop. Other Accessories as Shown in the Picture. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. At present, our company has warehouses in. NO tariffs within EU countries. According to the different location, transport time will range from 2 to 7 workdays. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. The item “220V Professional Woodworking Band Saws Cast Table Saw Solid Fence & Blade 10″ is in sale since Wednesday, June 3, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Band Saws”. The seller is “loveshoppingjxts” and is located in Prague. This item can be shipped worldwide.
  • Blade Length: 70.5in
  • Blade Speed: 11m/s(660-960m/min)
  • Blade Width: 0.24-0.51in
  • Brand: Taishi
  • Colour: Green
  • Country/Region of Manufacture: China
  • G.W.: 68lbs
  • LPA Sound Pressure Level: 92.7 dB(A)
  • LWA Sound Power Level: 102.3 dB(A)
  • N.W.: 66.13lbs
  • Package Size: 35×17.7×13.8in
  • Power Source: Corded Electric
  • Processing Scope Max. Height: 4.7in
  • Processing Scope Max. Width: 9.6in
  • Rated Input Power: 420W
  • Saw Specification: 1790×6-13mm
  • Saw Wheel Dia.: 10in
  • Set Includes: Blades
  • Suitable For: Wood
  • Type: Table Saw
  • Voltage: 220 50Hz
  • Working Mode: Semi-Auto
  • Worktable Size: 11.8×11.8in
  • Worktable Tilt: 0-45°
10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V

10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V

10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V

10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V

10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V

10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V

10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V

10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V

10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V

10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V

10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V

10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V

Ballscrew & Linear rail. Packing & Filling Machine. Small Item in DE. Small Item in US. Small Item in UK. 10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V. WATCH THIS ITEMEMAIL A FRIEND. The bandsaw is intended for the slitting and crosscutting of timber or wood-like workpieces. Round materials may only be cut with suitable holding devices. A compact floor standing woodworking bandsaw with a massive cutting capacity, for a machine of this cutting depth of 120mm(4.7). The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The bandsaw has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table. The cast iron table tilts from 0 degree to 45 degrees and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. Rapid tension/tape release lever. Guiding on toothed strips with a millimetre scale makes it possible to precisely set upper band guiding. T-square of the band saw with a lock on the eccentric and equipment for parallel cutting. Made of cast iron, precise table of ground and polished surface. Legible band tension indicator. Bilateral band guiding greatly improves its durability. Mains powered LED work Light. Quick action lock on rip fence. Wear a breathing mask. Height: 120mm(4.7in). Width: 245mm(9.6in). Blade Length: 1,790mm(70.5in). Blade Width: 6-13mm(0.24-0.51in). Rated Voltage: 220V 50Hz. Rated Input Power: 420W. Blade Speed: 11m/s(660-960m/min). Worktable Size: 300x300mm(11.8×11.8in). LPA Sound Pressure Level: 92.7 dB(A). LWA Sound Power Level: 102.3 dB(A). Package Size: 89x45x35cm(35×17.7×13.8in). 1 × Base Frame. 1 × Machine Worktable. 1 × Push Stick. 1 × Parallel Stop. Other Accessories as Shown in the Picture. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. At present, our company has warehouses in. NO tariffs within EU countries. Transport time will range from 2 to 7 workdays according to your location. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. Electric Rifle Air High Pressure PCP System 220V Hot Sale Compressor Pump. Turning CJ18A Milling Metal Digital Mini Lathe Package 7″x14″ & Accessory. 400g 60/40 2% Flux Tin Lead 1.0mm Soldering Reel Wire Rosin Core Solder. Manual Donut Depositor Dropper Plunger Dough Batter Dispenser Hopper Maker. 2Pcs Slot Cutter 3 Wing Router Bit 1/2 &1/4 inch Shank Adjustable Woodworking EU. 500ml 1000ml 1L 2000ml 2L Heating Mantle with Magnetic Stirrer 220V. The item “10 Professional Woodworking Bandsaw with Cast Table Solid Fence & Blade 220V” is in sale since Saturday, January 11, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Band Saws”. The seller is “enjoyfactoryprice” and is located in Prague. This item can be shipped worldwide.
  • Blade Length: 70.5in
  • Blade Speed: 11m/s(660-960m/min)
  • Blade Width: 0.24-0.51in
  • Brand: Taishi
  • Colour: Green
  • Country/Region of Manufacture: China
  • G.W.: 68lbs
  • LPA Sound Pressure Level: 92.7 dB(A)
  • LWA Sound Power Level: 102.3 dB(A)
  • N.W.: 66.13lbs
  • Package Size: 35×17.7×13.8in
  • Power Source: Corded Electric
  • Processing Scope Max. Height: 4.7in
  • Processing Scope Max. Width: 9.6in
  • Rated Input Power: 420W
  • Saw Specification: 1790×6-13mm
  • Saw Wheel Dia.: 10in
  • Set Includes: Blades
  • Suitable For: Wood
  • Type: Table Saw
  • Voltage: 220 50Hz
  • Working Mode: Semi-Auto
  • Worktable Size: 11.8×11.8in
  • Worktable Tilt: 0-45°