Router Table & Table Saw Anti-Kickback Fence Feeder Safety Roller System

Please be aware you might have to pay custom charges when purchasing this item. Router Table & Table Saw Anti-Kickback Fence Feeder. The patented Anti-Kickback Hold Down Guide System ensures safer, more accurate cutting and greater control – uses adjustable aluminum and steel guides, each independent, tightened onto a maximum 5 wide fence. Picture shows a 2″ wide wide clamp but it now comes with an optional larger 5″ fence clamp as well. Ideal for table saws, radial arm saws, shapers, router tables, jointers, planers, bandsaws, overarm routers and more. (yes people have thought that). As lumber is fed along fence and under spring loaded hold down arms, 2-5/16 dia. X 3/4 wide rubber wheels revolve in only the forward direction. Should lumber kick back, the wheel locks to keep wood in place, minor kickback allowance frees up cutter to prevent motor burnout. If desired can be used for hold down use only, spring arm tension can be adjusted and locking pawl set to allow wheels to rotate freely in either direction(no kickback protection provided). System operates in left or right direction and handles pieces as narrow as 1/4″ thick x 1/4″ wide. The wheels can be adjust to tilt up to 15 degrees off of the normal 90 degrees so it will pull the stock up against the fence. There are two ways of tilting the wheels so it will pull towards the fence, they either can be steered like the angle adjustment on ours or other systems have a camber angle. Our wheels are very flat so they utilize maximum holding power through full surface contact which you would lose by adjusting the camber so the inventor uses the other method which is also better because it can be dialed in from 0-15 degrees to your liking. Works with both left and right tilt table saws! The item “Router Table & Table Saw Anti-Kickback Fence Feeder Safety Roller System” is in sale since Monday, October 1, 2018. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Router Tables”. The seller is “duro_tools” and is located in Middletown, Connecticut. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • EAN: Does not apply
  • Brand: Unbranded
3D Safety Push Block Router Kit Woodworking Pusher Pad For Table Fence Band Tool

3D Safety Push Block Router Kit Woodworking Pusher Pad For Table Fence Band Tool

3D Safety Push Block Router Kit Woodworking Pusher Pad For Table Fence Band Tool

3D Safety Push Block Router Kit Woodworking Pusher Pad For Table Fence Band Tool

3D Safety Push Block Router Kit Woodworking Pusher Pad For Table Fence Band Tool

3D Safety Push Block Router Kit Woodworking Pusher Pad For Table Fence Band Tool

3D Safety Push Block Router Kit Woodworking Pusher Pad For Table Fence Band Tool

3D Safety Push Block Router Kit Woodworking Pusher Pad For Table Fence Band Tool

New Wood working safety push block for Table Saw or router. 100% Brand new and high quality. Make the operation more safe to sawing the wooden plate. Accurately saw the wood with this push block. You can easily and safely gude your small workpiece on your router table. Suitable for table saw, band saw, flip engraving machine, flip electric circular saw and more. Adjustable structure for your demand. F you work on big board, you can use 2pcs push block. 221412cm/ 8.7 5.5 4.7inch. 1 Safety push block. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. The item “3D Safety Push Block Router Kit Woodworking Pusher Pad For Table Fence Band Tool” is in sale since Monday, November 12, 2018. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Saws & Accessories\Table Saws”. The seller is “dresses-up” and is located in Shenzhen. This item can be shipped worldwide.
  • Brand: Unbranded
  • MPN: Does Not Apply
  • Dimension: 22*14*12cm/ 8.7* 5.5* 4.7inch
  • Color: Yellow
3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

You may also like. 3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking. Packing size 32.5X29.5X13cm. Suitable forTable saw, band saw, flip engraving machine, flip electric circle. 3-Directional force for unmatched control of the work piece. Moving blade guard hand protection. Precise 1/4 thin rips. Virtually eliminates kickback on table saws. Versatility: Work with small stock safely on the table saw, router table, jointer, and band saw. It can be angled and adjusted for your comfort and control. Don’t use a table saw without it. 1 x 3D safety push block. If you can not receive the package in 30 days. Please repack the item carefully. Specification: Packing size 32.5X29.5X13cm ColorYellow UseWooden function tool DIY suppliesWoodworking StyleBase Suitable forTable saw, band saw, flip engraving machine, flip electric circle. Package Included: 1 x 3D safety push block. The item “3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking” is in sale since Saturday, October 20, 2018. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Saws & Accessories\Table Saws”. The seller is “omgbaby_2018″ and is located in GuangZhou. This item can be shipped worldwide.
  • Brand: Unbranded
  • MPN: Does not apply
3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking

Description: 3D Safety Push Block Woodworking Pusher For Table Saw Router Table Jointer Band Saw Specification: Packing size 32.5X29.5X13cm ColorYellow UseWooden function tool DIY suppliesWoodworking StyleBase Suitable forTable saw, band saw, flip engraving machine, flip electric circle. 3-Directional force for unmatched control of the work piece. Moving blade guard hand protection. Precise 1/4 thin rips. Virtually eliminates kickback on table saws. Versatility: Work with small stock safely on the table saw, router table, jointer, and band saw. It can be angled and adjusted for your comfort and control. Don’t use a table saw without it. Package Included: 1 x 3D safety push block. International buyers please note: a. The item “3D Safety Push Block Router Table Fence Band Saw Cutting Guide Bar Woodworking” is in sale since Monday, October 8, 2018. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Saws & Accessories\Table Saws”. The seller is “kwotop2014″ and is located in HK. This item can be shipped worldwide.
  • MPN: Does not apply
  • Brand: Unbranded/Generic
  • Manufacturer Part Number: zVA2251445
DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence. Specification: Name: Woodworking Feather board set Color: Orange Thickness: 16mm Width: 165mm Total Length: 210mm Feature: – Easy set-up feature – Unique miter gauge slot allows quick removal – Multipurpose featherboard for holding the stock against the guide fence – High tech polymer ensures it will maintain its original shape – Advanced design means no marring to your workpiece Product included: 2 x Feather board for router tablesWith parts and accessories Feature: 1. A featherboard is undoubtedly the most underrated router-table accessory. When properly installed, the flexible fingers keep the workpiece. Pressed tightly against the router tabletop or router fence throughout the routing operation. Featherboard are made from a high-tech polymer. And each one has 13 angled fingers that apply steady pressure consistently produces cleaner cuts with less chance of kickback, chattering or lifting. Featherboard slide into miter-gauge slots in the router table or fence, and are locked in place by tightening a pair of knobs. Note it can also be used on a table saw, shaper, bandsaw or any other woodworking machine with a miter gauge slot. The images are for reference only. Please take the item you get as the standard. Please repack the item carefully. If you we are not satisfied with the product or service , please contact me and don’t give us negative or natural feedback, We must give you a satisfactory solution. Your action will help us offer our milk and bread. The item “DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence” is in sale since Monday, March 05, 2018. This item is in the category “Home & Garden\Tools\Power Tools\Saws & Blades\Table Saws”. The seller is “magic-world-tt” and is located in Shanghai. This item can be shipped worldwide.
  • Brand: A.B Crew
  • Type: Woodworking Feather board set
  • MPN: Does Not Apply
  • Country/Region of Manufacture: China
  • Width: 165mm
  • Thickness: 16mm
  • Total Length: 210mm
  • Colour: Orange
  • Qty: 1Set
DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence

DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence. Specification: Name: Woodworking Feather board set Color: Orange Thickness: 16mm Width: 165mm Total Length: 210mm Feature: – Easy set-up feature – Unique miter gauge slot allows quick removal – Multipurpose featherboard for holding the stock against the guide fence – High tech polymer ensures it will maintain its original shape – Advanced design means no marring to your workpiece Product included: 2 x Feather board for router tablesWith parts and accessories Feature: 1. A featherboard is undoubtedly the most underrated router-table accessory. When properly installed, the flexible fingers keep the workpiece. Pressed tightly against the router tabletop or router fence throughout the routing operation. Featherboard are made from a high-tech polymer. And each one has 13 angled fingers that apply steady pressure consistently produces cleaner cuts with less chance of kickback, chattering or lifting. Featherboard slide into miter-gauge slots in the router table or fence, and are locked in place by tightening a pair of knobs. Note it can also be used on a table saw, shaper, bandsaw or any other woodworking machine with a miter gauge slot. The images are for reference only. Please take the item you get as the standard. Please repack the item carefully. We do not work holidays in Hong Kong. If you we are not satisfied with the product or service , please contact me and don’t give us negative or natural feedback, We must give you a satisfactory solution. Your action will help us offer our milk and bread. The item “DIY Woodworking Double Feather Board MWT For Router Tables Standard Safety Fence” is in sale since Sunday, January 07, 2018. This item is in the category “Home & Garden\Tools\Power Tools\Saws & Blades\Table Saws”. The seller is “magic-world-tt” and is located in Shang Hai. This item can be shipped worldwide.
  • Brand: A.B Crew
  • Type: Woodworking Feather board set
  • MPN: Does Not Apply
  • Country/Region of Manufacture: China
  • Width: 165mm
  • Thickness: 16mm
  • Total Length: 210mm
  • Colour: Orange
  • Qty: 1Set
Dual Motion Featherboard for Table Saw Fence Feeder Safety for Miter Gauge Slot

Dual Motion Featherboard for Table Saw Fence Feeder Safety for Miter Gauge Slot. Innovative Featherboard Design Provides Consistent Tension and Maximum Hold. Deluxe Feather board Quick positioning feather board keeps stock tight against the fence and flat to the saw table while cutting. Prevents chatter and dangerous kick-back. FeatherBoard for Routers and Table Saws features a unique pre-load design that allows you to set the appropriate tension between the work-piece and the fence of the power tool. Please use the new -add to cart- feature to compile multiple items. This will ensure that the combined discount is automatically deducted. Sometimes when items have different classes of service the calculator cannot combine them so it would make sense to request a total. Create listings that get noticed! With Auctiva’s 1,800+ Templates. Drill Straight / Angle Guide for Bit 1/8, 3/16, 1/4, 5/16, 3/8, 1/2 doweling jig (#111066521971). I RECEIVED ITEM IN PERFECT CONDITION. Glue Roller Bottle for Wood & Woodworking Glue with 2 1/2 Wide Roller 8 oz (#120945223008). Adjustable Double 3/8 inch Pocket Hole Jig Guide with Ruler in Metric & English (#121002558181). 3/8 Pocket Hole Step Drill Bit Depth Stop Collar & hex for Kreg Jig KJD, HSS (#110980929850). Router Corner Radi Templates, Radius Woodworking Pattern for Router Table, Radii (#122177993614). The item “Dual Motion Featherboard for Table Saw Fence Feeder Safety for Miter Gauge Slot” is in sale since Thursday, April 20, 2017. This item is in the category “Home & Garden\Tools\Power Tools\Jigs & Templates”. The seller is “duro_tools” and is located in Middletown, Connecticut. This item can be shipped worldwide.
  • Brand: MC
  • MPN: 1406
Wooden Deluxe Featherboard for Table Saw Fence Feeder Safety fr Miter Gauge Slot

Wooden Deluxe Featherboard for Table Saw Fence Feeder Safety fr Miter Gauge Slot

Present your best items with Auctiva’s FREE Scrolling Gallery. Wooden Deluxe Featherboard for Table Saw Fence Feeder Safety fr Miter Gauge Slot. Deluxe Wooden Feather board Quick positioning feather board keeps stock tight against the fence and flat to the saw table while cutting. Prevents chatter and dangerous kick-back. Some woodworkers prefer the feel of a wooden featherboard! Locks into standard miter slots with a quick twist of the knob. 4-1/2″ adjustment slot, 9/16″ thick x 1-3/4″ wide x 10″ long. Please use the new -add to cart- feature to compile multiple items. This will ensure that the combined discount is automatically deducted. Sometimes when items have different classes of service the calculator cannot combine them so it would make sense to request a total. Create listings that get noticed! With Auctiva’s 1,800+ Templates. The item “Wooden Deluxe Featherboard for Table Saw Fence Feeder Safety fr Miter Gauge Slot” is in sale since Tuesday, February 02, 2016. This item is in the category “Home & Garden\Tools\Power Tools\Jigs & Templates”. The seller is “duro_tools” and is located in Middletown, Connecticut. This item can be shipped worldwide.
  • Brand: Unbranded
  • MPN: 825-1425