DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge, 18 Inch. USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact fitment); The slide bar has a locking washer that fits snugly into the track with a matching groove; You can use this precision miter gauge system with or without the fence and T-slots along length of fence allow you to attach 3/4-inch x 2-5/8-inch (19mm x 67mm) auxiliary fences, stops, or other jigs and fixtures using standard 1/4-inch hex head bolts. NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts; Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm) wide and eliminates play in miter slot with the turn of a screwdriver; Dial allows between 90 to 30 degrees of angle adjustment while the protractor head features positive stops at 0, 22.5, 30, 45, 60, 67.5, and 90 degrees (both left and right) with 13 total pre-set common angles; Adjustable fence offers support as close to your blade as necessary. BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip away stop allows end trimming of longer woodworking pieces before the final cut to length; Flip stop allows you to temporarily flip up out of your way without removing; Fence bar constructed from anodized aluminum; Protractor gauge head constructed from solid steel that is accurately machined square to the bar and your table. PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge hardware for your convenience. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Carpentry, Woodworking\Saws”. The seller is “idohpt” and is located in this country: US. This item can be shipped worldwide.
  • Gift: Cute,Best,Funny,Girls,Kids,Boy,Girls
  • Shipping: Free Shipping
  • Brand: Deadwood Crafted Tools
  • UPC: 810009872238
  • ISBN: 0810009872238
DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw F

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge, 18 Inch. USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact fitment); The slide bar has a locking washer that fits snugly into the track with a matching groove; You can use this precision miter gauge system with or without the fence and T-slots along length of fence allow you to attach 3/4-inch x 2-5/8-inch (19mm x 67mm) auxiliary fences, stops, or other jigs and fixtures using standard 1/4-inch hex head bolts. NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts; Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm) wide and eliminates play in miter slot with the turn of a screwdriver; Dial allows between 90 to 30 degrees of angle adjustment while the protractor head features positive stops at 0, 22.5, 30, 45, 60, 67.5, and 90 degrees (both left and right) with 13 total pre-set common angles; Adjustable fence offers support as close to your blade as necessary. BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip away stop allows end trimming of longer woodworking pieces before the final cut to length; Flip stop allows you to temporarily flip up out of your way without removing; Fence bar constructed from anodized aluminum; Protractor gauge head constructed from solid steel that is accurately machined square to the bar and your table. PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge hardware for your convenience. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Carpentry, Woodworking\Saws”. The seller is “arkinre” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Deadwood Crafted Tools
  • UPC: 810009872238
  • ISBN: 0810009872238
DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw. As our valued customer, we will do our best to make sure the product you receive arrives to you on time and as expected. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Carpentry, Woodworking\Saws”. The seller is “us-bestdeals” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Croatia, Republic of, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cayman Islands, Liechtenstein, Luxembourg, Monaco, Martinique, Nicaragua, Peru, Paraguay, Reunion, Uruguay.
  • Binding: Misc.
  • Warranty: This product has a manufacturer warranty against defects in mater
  • ProductTypeName: SAW
  • ProductGroup: Home Improvement
  • PackageQuantity: 1
  • NumberOfItems: 1
  • MaterialType: Aluminum; Alloy Steel
DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge, 18 Inch. USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact fitment); The slide bar has a locking washer that fits snugly into the track with a matching groove; You can use this precision miter gauge system with or without the fence and T-slots along length of fence allow you to attach 3/4-inch x 2-5/8-inch (19mm x 67mm) auxiliary fences, stops, or other jigs and fixtures using standard 1/4-inch hex head bolts. NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts; Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm) wide and eliminates play in miter slot with the turn of a screwdriver; Dial allows between 90 to 30 degrees of angle adjustment while the protractor head features positive stops at 0, 22.5, 30, 45, 60, 67.5, and 90 degrees (both left and right) with 13 total pre-set common angles; Adjustable fence offers support as close to your blade as necessary. BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip away stop allows end trimming of longer woodworking pieces before the final cut to length; Flip stop allows you to temporarily flip up out of your way without removing; Fence bar constructed from anodized aluminum; Protractor gauge head constructed from solid steel that is accurately machined square to the bar and your table. PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge hardware for your convenience. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Carpentry, Woodworking\Saws”. The seller is “b00y4k4guy” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Deadwood Crafted Tools
  • UPC: 810009872238
  • ISBN: 0810009872238
DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Sa

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge, 18 Inch. USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact fitment); The slide bar has a locking washer that fits snugly into the track with a matching groove; You can use this precision miter gauge system with or without the fence and T-slots along length of fence allow you to attach 3/4-inch x 2-5/8-inch (19mm x 67mm) auxiliary fences, stops, or other jigs and fixtures using standard 1/4-inch hex head bolts. NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts; Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm) wide and eliminates play in miter slot with the turn of a screwdriver; Dial allows between 90 to 30 degrees of angle adjustment while the protractor head features positive stops at 0, 22.5, 30, 45, 60, 67.5, and 90 degrees (both left and right) with 13 total pre-set common angles; Adjustable fence offers support as close to your blade as necessary. BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip away stop allows end trimming of longer woodworking pieces before the final cut to length; Flip stop allows you to temporarily flip up out of your way without removing; Fence bar constructed from anodized aluminum; Protractor gauge head constructed from solid steel that is accurately machined square to the bar and your table. PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge hardware for your convenience. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Carpentry, Woodworking\Saws”. The seller is “noamtogo” and is located in this country: US. This item can be shipped worldwide.
  • Brand: Deadwood Crafted Tools
  • UPC: 810009872238
  • ISBN: 0810009872238
DCT Table Saw Fence And Miter Gauge For With 3/8in X 3/4in Bar Gauge, 18 Inch

DCT Table Saw Fence And Miter Gauge For With 3/8in X 3/4in Bar Gauge, 18 Inch

DCT Table Saw Fence And Miter Gauge For With 3/8in X 3/4in Bar Gauge, 18 Inch

DCT Table Saw Fence And Miter Gauge For With 3/8in X 3/4in Bar Gauge, 18 Inch

DCT Table Saw Fence And Miter Gauge For With 3/8in X 3/4in Bar Gauge, 18 Inch

DCT Table Saw Fence And Miter Gauge For With 3/8in X 3/4in Bar Gauge, 18 Inch

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge, 18 Inch. MAKE ACCURATE CUTS: The DCT Table Saw Miter Fence with Miter Bar Gauge & Flip Stop offers safety and accuracy when cutting or sanding precise, repeatable cuts (Not intended to hold board tightly but to make many cuts the same size) When you want to cut a more plicated angle, the gauge dials to precise angles as the adjustable scale allows quick adjustments to 1/10th of a degree increment. USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact fitment) The slide bar has a locking washer that fits snugly into the track with a matching groove You can use this precision miter gauge system with or without the fence and T-slots along length of fence allow you to attach 3/4-inch x 2-5/8-inch (19mm x 67mm) auxiliary fences, stops, or other jigs and fixtures using standard 1/4-inch hex head bolts. NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm) wide and eliminates play in miter slot with the turn of a screwdriver Dial allows between 90 to 30 degrees of angle adjustment while the protractor head features positive stops at 0, 22.5, 30, 45, 60, 67.5, and 90 degrees (both left and right) with 13 total pre-set mon angles Adjustable fence offers support as close to your blade as necessary. BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip away stop allows end trimming of longer woodworking pieces before the final cut to length Flip stop allows you to temporarily flip up out of your way without removing Fence bar constructed from anodized aluminum Protractor gauge head constructed from solid steel that is accurately machined square to the bar and your table. PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge hardware for your convenience. If the item cannot use or you received your item not as expected. Please let us know. Of course, there is no cost for you for return the item back. If it possible , could you please help us write or select reason for return is “change my mind ” or “order by mistake” or “Doesn’t fit or ” Just didn’t like it. Do not worry, We do not charge anything. Please don’t write or select another reason. If you consider to help us, it would mean so much for us. Dimension: 2.8 x 18.2 x 6.5 inchs. We will always guarantee a return with full responsibility. The location of the warehouse responsibility for the return will be determined by the fulfillment service department. Of course, there is no cost for you for return item back. If it possible , could you please help us write or select reason for return is “change my mind “or “order by mistake” or Doesn’t fit or ” Just didn’t like it “. Do not worry, we do not charge anything. If you consider to help us, it would mean so much for me. The item “DCT Table Saw Fence And Miter Gauge For With 3/8in X 3/4in Bar Gauge, 18 Inch” is in sale since Monday, September 30, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Saws & Accessories\Table Saws”. The seller is “2bfairshop” and is located in Joliet, Illinois. This item can be shipped worldwide.
  • Brand: Does not apply
  • MPN: does not apply
  • UPC: does not apply
  • Category: Table Saw Accessories