DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8 x 3/4 Inch Slots

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8 x 3/4 Inch Slots

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8 x 3/4 Inch Slots

If you are a woodworker that does segmented turning or makes angled cuts, you need to be able to do repeatable angles and sometimes do staved boxes that require longer rips than you can do on your miter saw. The table saw miter sled gauge groove fits most standard 3/4-inch table saw slots and can be used with or without the fence as the T-slots along the length of fence allow you to attach 3/4-inch x 2-5/8-inch auxiliary fences, stops, or other jigs and fixtures. The scale allows quick adjustments to 1/10th of a degree and the fence offers great support as close to your blade as necessary. The flip stop on the fence allows you to trim ends before the final cut. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tool & Air Tool Accessories\Saw Blades\Other Saw Blades”. The seller is “m-store-usa” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Unbranded
  • Type: 122838
  • Item Height: 2.750
  • MPN: 2238
  • Item Length: 18.250
  • Item Width: 6.500
  • UPC: 810009872238
DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8 x 3/4 Inch Slots

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8 x 3/4 Inch Slots

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8 x 3/4 Inch Slots

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8 x 3/4 Inch Slots

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8 x 3/4 Inch Slots

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8 x 3/4 Inch Slots

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8 x 3/4 Inch Slots

Add to Favorite Sellers. Sign up to Newsletter. View more great items. If you are a woodworker that does segmented turning or makes angled cuts, you need to be able to do repeatable angles and sometimes do staved boxes that require longer rips than you can do on your miter saw. The table saw miter sled gauge groove fits most standard 3/4-inch table saw slots and can be used with or without the fence as the T-slots along the length of fence allow you to attach 3/4-inch x 2-5/8-inch auxiliary fences, stops, or other jigs and fixtures. The scale allows quick adjustments to 1/10th of a degree and the fence offers great support as close to your blade as necessary. The flip stop on the fence allows you to trim ends before the final cut. USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact fitment); The slide bar has a locking washer that fits snugly into the track with a matching groove; You can use this precision miter gauge system with or without the fence and T-slots along length of fence allow you to attach 3/4-inch x 2-5/8-inch (19mm x 67mm) auxiliary fences, stops, or other jigs and fixtures using standard 1/4-inch hex head bolts. NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts; Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm) wide and eliminates play in miter slot with the turn of a screwdriver; Dial allows between 90 to 30 degrees of angle adjustment while the protractor head features positive stops at 0, 22.5, 30, 45, 60, 67.5, and 90 degrees (both left and right) with 13 total pre-set common angles; Adjustable fence offers support as close to your blade as necessary. BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip away stop allows end trimming of longer woodworking pieces before the final cut to length; Flip stop allows you to temporarily flip up out of your way without removing; Fence bar constructed from anodized aluminum; Protractor gauge head constructed from solid steel that is accurately machined square to the bar and your table. PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge hardware for your convenience. Auto Body Now is a family owned company based out of South Dakota. We enjoy providing the Midwest with the highest quality auto body products on the market. We are a distributor for 3M, Dewalt, Makita, Milwaukee, Milton, Lisle, Irwin, U-Pol, SEM, GearWrench, Norton, Microflex, Wizard, Evercoat, Forever Black and Tool Aid. We take great pride in satisfying our customers, and as a Midwest company, we are able to get your products to you quickly. Whether you are a DIYer or an auto body professional, we stand by our commitment to serve you. California Residents Prop 65: This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. If there are any restrictions to your country it will advise you of that during checkout. Auto Body Now offers a 30-day no-hassle return program on all items. To process a return, simply go to your MyeBay page, select the item/items that you want to return, and choose the appropriate reason code. Your satisfaction is our main priority. We look forward to hearing from you! This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8 x 3/4 Inch Slots” is in sale since Wednesday, July 24, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Saws & Accessories\Other Saws & Accessories”. The seller is “autobodynow” and is located in Sioux Falls, South Dakota. This item can be shipped worldwide.
  • Brand: Deadwood Crafted Tools
  • MPN: 2238
  • California Prop 65 Warning: WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.