Genuine Original Ryobi BT3000 Table Saw Sliding Miter Table Assembly withfence

Genuine Original Ryobi BT3000 Table Saw Sliding Miter Table Assembly withfence

Genuine Original Ryobi BT3000 Table Saw Sliding Miter Table Assembly withfence

Genuine Original Ryobi BT3000 Table Saw Sliding Miter Table Assembly withfence

Genuine Original Ryobi BT3000 Table Saw Sliding Miter Table Assembly withfence

Genuine Original Ryobi BT3000 Table Saw Sliding Miter Table Assembly withfence

Genuine Original Ryobi BT3000 Table Saw Sliding Miter Table Assembly withfence

Genuine Original Ryobi BT3000 Table Saw Sliding Miter Table Assembly withfence

Genuine Original Ryobi BT3000 Table Saw Sliding Miter Table Assembly withfence

Genuine Original Ryobi BT3000 Table Saw Sliding Miter Table Assembly withfence

On offer I have Genuine Original Ryobi BT3000 Table Saw Sliding Miter Table Assembly w/fence. Works as it should with th elocking tabs intact. The top tray is complete including the small plastic sliders on the bottom of the top assembly. The fence is missing the tightening knob and has some cuts to the plastic ends as well. The item “Genuine Original Ryobi BT3000 Table Saw Sliding Miter Table Assembly withfence” is in sale since Monday, September 13, 2021. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “ssa1035″ and is located in Lavallette, New Jersey. This item can be shipped worldwide.
  • Model: BT3000
  • Battery Capacity: n/a
  • Blade Length: n/a
  • Battery Included: No
  • Cutting Depth: 3 in
  • Blade Location: Centered
  • Cutting Angle: 90°
  • Blade Strength: High
  • Power Source: Corded Electric
  • Type: Table Saw
  • MPN: n/a
  • Number of Items in Set: 1
  • Number of Batteries: n/a
  • Battery Technology: n/a
  • Brand: Ryobi
  • Set Includes: n/a
  • Suitable For: Wood
  • Blade Diameter: n/a
  • Voltage: 120 V
27 x 12 Craftsman Table Saw Cast Iron Extension Wing 62947 WithFence Rail Brackets

27 x 12 Craftsman Table Saw Cast Iron Extension Wing 62947 WithFence Rail Brackets

27 x 12 Craftsman Table Saw Cast Iron Extension Wing 62947 WithFence Rail Brackets

27 x 12 Craftsman Table Saw Cast Iron Extension Wing 62947 WithFence Rail Brackets

27 x 12 Craftsman Table Saw Cast Iron Extension Wing 62947 WithFence Rail Brackets

27 x 12 Craftsman Table Saw Cast Iron Extension Wing 62947 WithFence Rail Brackets

27 x 12 Craftsman Table Saw Cast Iron Extension Wing 62947 WithFence Rail Brackets

27 x 12 Craftsman Table Saw Cast Iron Extension Wing 62947 WithFence Rail Brackets

27 x 12 Craftsman Table Saw Cast Iron Extension Wing 62947 WithFence Rail Brackets

27 x 12 Craftsman Table Saw Cast Iron Extension Wing 62947 WithFence Rail Brackets

27 x 12 Craftsman Table Saw Cast Iron Extension Wing 62947 WithFence Rail Brackets

For sale is a table saw extension wing for the 113.298762 Sears Craftsman Table Saw. Will fit a number of other models as well. Size of 27″ x 12″ x 1-1/2 thick. Included are two 818308 brackets with spacers for attaching the fence rail to the front and rear of the extension. The item “27 x 12 Craftsman Table Saw Cast Iron Extension Wing 62947 WithFence Rail Brackets” is in sale since Saturday, June 29, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “aquacondo” and is located in Crystal Lake, Illinois. This item can be shipped worldwide.
  • Battery Included: No
  • Custom Bundle: No
  • Type: Table Saw 113.298842, 113.298762, others
  • MPN: 62947, 9-22261
  • Brand: Craftsman
  • Modified Item: No
  • Non-Domestic Product: No
  • Blade Diameter (in): 10″
Atlas 8 Workshop 9310 Table Saw 18 x 7 Extension Wing WithFence Slide Rack

Atlas 8 Workshop 9310 Table Saw 18 x 7 Extension Wing WithFence Slide Rack

Atlas 8 Workshop 9310 Table Saw 18 x 7 Extension Wing WithFence Slide Rack

Atlas 8 Workshop 9310 Table Saw 18 x 7 Extension Wing WithFence Slide Rack

Atlas 8 Workshop 9310 Table Saw 18 x 7 Extension Wing WithFence Slide Rack

Atlas 8 Workshop 9310 Table Saw 18 x 7 Extension Wing WithFence Slide Rack

Atlas 8 Workshop 9310 Table Saw 18 x 7 Extension Wing WithFence Slide Rack

For sale is a cast iron extension wing with slide rack from an Atlas Workshop 9310 8 table saw. Size is 18″ x 7″ x 1 thick. The item “Atlas 8 Workshop 9310 Table Saw 18 x 7 Extension Wing WithFence Slide Rack” is in sale since Monday, February 8, 2021. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “aquacondo” and is located in Crystal Lake, Illinois. This item can be shipped worldwide.
  • Model: 9310
  • Country/Region of Manufacture: United States
  • Battery Included: No
  • Power Source: Corded Electric
  • Type: Table Saw
  • Color: Gray
  • Motor Type: Brushless
  • Brand: Atlas
  • Suitable For: Wood
  • Blade Diameter: 8 in
  • RPM: 1725 RPM
  • Horsepower: 1/2 HP
  • Amperes: 7.0 Amps
  • Motor shaft diameter: 5/8″
  • Voltage: 115
Montgomery Ward THS 2700 Motorized Table Saw Table Extension Wing WithFence Rack

Montgomery Ward THS 2700 Motorized Table Saw Table Extension Wing WithFence Rack

Montgomery Ward THS 2700 Motorized Table Saw Table Extension Wing WithFence Rack

Montgomery Ward THS 2700 Motorized Table Saw Table Extension Wing WithFence Rack

Montgomery Ward THS 2700 Motorized Table Saw Table Extension Wing WithFence Rack

Montgomery Ward THS 2700 Motorized Table Saw Table Extension Wing WithFence Rack

Montgomery Ward THS 2700 Motorized Table Saw Table Extension Wing WithFence Rack

For sale is an extension wing with fence extension gear rack for the THS 2700 table saw. Size of 27″ x 10″ x 1-3/4. The item “Montgomery Ward THS 2700 Motorized Table Saw Table Extension Wing WithFence Rack” is in sale since Friday, December 13, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “aquacondo” and is located in Crystal Lake, Illinois. This item can be shipped worldwide.
  • Model: THS 2700
  • Country/Region of Manufacture: United States
  • Battery Included: No
  • Custom Bundle: No
  • Power Source: Corded
  • Type: table saw.
  • MPN: does not apply
  • Brand: Montgomery Ward
  • Blade Diameter: 8″ or 9″
  • Modified Item: No
  • Bundle Listing: No
  • Voltage: 115
General EU 10'' Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working

General EU 10'' Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working

General EU 10'' Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working

General EU 10'' Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working

General EU 10'' Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working

General EU 10'' Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working

General EU 10'' Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working

General EU 10'' Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working

General EU 10'' Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working

General EU 10'' Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working

General EU 10'' Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working

General EU 10'' Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working

Spindle Motor And Inverter VFD. You may also like. New Electric Feed Mill Wet&Dry Cereals Grinder Rice Corn Grain Coffee Wheat 220V. AUTOMATIC SOLDER PASTE GLUE DROPPER LIQUID DISPENSER CONTROLLER YDL-983A 220V. New 1200W Rosin Heat Press Machine Dual Heating Elements Swing-Arm High Pressure. NEW Stainless Steel Commercial Sink Single Bowl Kitchen Catering Prep Table. Racking Automatic Weigh Powder 10999G Filler Tea/Seed/Grain Machine Filling. NEW 220V 3KG Gold Melting Digital Furnace Kiln Refining Gold Silver Alloy 2012. General EU 10” Band Saw w/Fence & Guide Wheeled 0-45° Tilting Semi-Auto Working. The bandsaw is intended for the slitting and crosscutting of timber or wood-like workpieces. Round materials may only be cut with suitable holding devices. A compact floor standing woodworking bandsaw with a massive cutting capacity, for a machine of this cutting depth of 120mm(4.7). The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The bandsaw has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table. The cast iron table tilts from 0 degree to 45 degrees and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. Rapid tension/tape release lever. Guiding on toothed strips with a millimetre scale makes it possible to precisely set upper band guiding. T-square of the band saw with a lock on the eccentric and equipment for parallel cutting. Made of cast iron, precise table of ground and polished surface. Legible band tension indicator. Bilateral band guiding greatly improves its durability. Mains powered LED work Light. Quick action lock on rip fence. Wear a breathing mask. Height: 120mm(4.7in). Width: 245mm(9.6in). Blade Length: 1,790mm(70.5in). Blade Width: 6-13mm(0.24-0.51in). Rated Voltage: 220V 50Hz. Rated Input Power: 420W. Blade Speed: 11m/s(660-960m/min). Worktable Size: 300x300mm(11.8×11.8in). LPA Sound Pressure Level: 92.7 dB(A). LWA Sound Power Level: 102.3 dB(A). Package Size: 89x45x35cm(35×17.7×13.8in). 1 × Base Frame. 1 × Machine Worktable. 1 × Push Stick. 1 × Parallel Stop. Other Accessories as Shown in the Picture. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. We now have warehouses in Germany. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. The item “General EU 10” Band Saw withFence & Guide Wheeled 0-45° Tilting Semi-Auto Working” is in sale since Saturday, January 11, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Band Saws”. The seller is “motor-mall” and is located in Prague. This item can be shipped worldwide.
  • Blade Length: 70.5in
  • Blade Speed: 11m/s(660-960m/min)
  • Blade Width: 0.24-0.51in
  • Brand: Taishi
  • Colour: Green
  • Country/Region of Manufacture: China
  • G.W.: 68lbs
  • LPA Sound Pressure Level: 92.7 dB(A)
  • LWA Sound Power Level: 102.3 dB(A)
  • N.W.: 66.13lbs
  • Package Size: 35×17.7×13.8in
  • Power Source: Corded Electric
  • Processing Scope Max. Height: 4.7in
  • Processing Scope Max. Width: 9.6in
  • Rated Input Power: 420W
  • Saw Specification: 1790×6-13mm
  • Saw Wheel Dia.: 10in
  • Set Includes: Blades
  • Suitable For: Wood
  • Type: Table Saw
  • Voltage: 220 50Hz
  • Working Mode: Semi-Auto
  • Worktable Size: 11.8×11.8in
  • Worktable Tilt: 0-45°
Delta Table Saw Model RT-40 withfence and table

Delta Table Saw Model RT-40 withfence and table

Delta Table Saw Model RT-40 withfence and table

Delta Table Saw Model RT-40 withfence and table

Delta Table Saw Model RT-40 withfence and table

Delta Table Saw Model RT-40 withfence and table

Delta Table Saw Model RT-40 w/fence and table. The item “Delta Table Saw Model RT-40 withfence and table” is in sale since Thursday, May 7, 2020. This item is in the category “Home & Garden\Tools & Workshop Equipment\Other Tools & Workshop Equipment”. The seller is “stephefogli-0″ and is located in Brownsburg, Indiana. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Bangladesh, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Pakistan, Paraguay, Uruguay.
  • Brand: Delta
  • Model: 34790A 3- Phase
Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC

Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC

Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC

Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC

Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC

Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC

Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC

Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC

Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC

Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC

Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC

Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC

Offered for sale a Vintage Dremel 580-2 Hobby/Crafters 4-Inch Table Saw in Very Good Condition. Complete with Blade Guard, Miter Gauge, Fence and Two Blades as shown-see pictures. It’s been cleaned and lubricated. Drive Belt looks good. Rare to find these with their blade guard, miter gauge and fence. Two excellent web site references concerning these saws can be found here. The item “Dremel Model 580-2 Hobbyist 4 Table Saw withFence, Miter Gauge, Guard & Extra-VGC” is in sale since Sunday, July 1, 2018. This item is in the category “Home & Garden\Tools\Power Tools\Lathes & Accessories”. The seller is “flqc99″ and is located in Chesterfield, Missouri. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia.
  • Model: 580-2
  • Country/Region of Manufacture: United States
  • Suitable for: Wood
  • Brand: Dremel