Extruded Aluminum Cross-Cut Fence slides on table and quickly adjusts to varying angles. Telescoping fence extension supports longer work pieces for a smooth and controlled cut. Maximum table travel is 62 1/2 and Miter Angle adjusts from 0 to 50 deg. With six hard stops. Max Rip Capacity with fence in the front position is 41 and 49 with fence in the rear position. Relocate the power switch box for better access with the added Mounting plate and hardware. Steel constructed main frame, table mounting brackets and Tube legs create a robust platform and supports large materials. Fence holders on tube legs to assist in storing fence when not in use. Quick Locking fence lever easily locks and secures fence in. Sealed Ball bearings roll in a precision bearing track system for controlled operation. Fits PM2000B and PM3000B PowermaticTable Saws. What’s in The Box. 30 Day Satisfaction Guaranteed. 0 Degrees – 50 Degrees. Rip Capacity w/ Fence in Front Position. Rip Capacity w/ Fence in Rear Position. Secure & hassle-free shopping. All our sales are backed by a 30-day satisfaction guarantee.
Excellent Aluminum Alloy Material: This table saw miter gauge fence is made of excellent aluminum alloy material, which is sturdy and wear resistant, not easy to be damaged, and has a long service life. High Accuracy: This table saw miter gauge fence features high accuracy, and the minimum adjustment accuracy is 0.002mm. Double Sided Scale: This table saw miter gauge fence features a double sided scale, with one metric side and one imperial side, which can be switched freely. Easy To Operate: This table saw fence is very easy to operate, you can align the scale as you need and cut without measuring and scribing. Wide Application: This table saw miter gauge fence is widely used for woodworking, modeling, DIY and furniture processing. Item Type: Table Saw Miter Gauge Fence Material: Aluminum Alloy Length Range: Approx. 0-850mm/0-33.46in Angle Range: 0-70 Degree. 1 x Table Saw Miter Gauge Fence. 2 x Hex Socket Screw. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 Degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop. 19 x 4.8 x 2.4 inches. The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs. The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs. 200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The head is mounted to a solid steel miter bar that measure 18 in length and is. Standard miter slots are 3/4″ x 3/8″ with a 1/8″ “T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8″ in diameter and is just shy of 1/8″ to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading. Fulton Precision Miter Gauge with Aluminum Miter Fence and Flip Stop. We’ve all done the research or at the very least heard about miter gauges with fence systems that are very accurate, easy to adjust and make cross cutting angles on your table saw super easy. While that all sounds great, all those great features usually costs a lot. That is until now! The Fulton Precision Miter Gauge with Aluminum Miter Fence and Flip Stop comes packed with all those great features and more. The best part is that it is reasonably priced so that most any woodworker can afford it! Be Precise with Ease. If you have ever used a factory supplied miter gauge, then you know how limiting it can be. The Fulton Miter Gauge with Aluminum Fence and Stop makes the angle cutting process a breeze. Once the gauge is set and the fence is properly adjusted, cross cutting angles on your table saw just became a whole lot easier than just using a miter gauge by itself. When this aluminum fence is used with the Fulton Miter Gauge, you’ll be able to repetitively cut angle stock all day long with precise results! When designing the fence for this system we kept having the same issue happen over and over again. The standard 90 degree end on most miter gauge fences made the fence to saw blade gap too large and the wood kept binding in that gap. Our solution was to simply cut the fence ends at a 45 degree angle so that the fence can get as close as possible to the blade with minimal stock over hang. This helps prevent binding and produces a much cleaner cut. Convenient Aluminum Flip Stop. Included with the fence and miter gauge is a convenient flip stop for making repetitive cuts. Simply slide the flip stop to the exact position you need it to be, lock it in place and you’re ready to go! When the stop is not needed you can either remove from the fence or simply lift the stop upwards and out of the way until it is needed. Accurate and Easy to Adjust. The Fulton Miter Gauge is loaded with great features. One of the more prominent features are the positive stops that are set to the most common angles used by woodworkers. Simply loosen the handle by rotating it counter clockwise, pull the spring loaded pin lock up and and adjust the miter gauge to the desired angle. Once you find your positive stop angle, release the lock pin so it locks the angle in place and re-secure the handle by rotating int clockwise until it is snug. If you want to use an angle that is not one of the positive stops, the pin lock can be pulled upward and rotated so that it won’t engage any of the positive stop holes. This allows you to adjust the miter gauge to any angle you need. Left Side, Right Side or Even Upside Down.. For the most part, we tend to cut on one side of our table saw the majority of the time. It usually depends on the saw or just simply preference. This is why we included two different sticky back (PSA pressure sensitive adhesive) tapes so you can choose which direction you need. We also know that some of use like to do things a little differently. If you are looking down at your miter fence from above then it may make sense for some of us to place the tape on to the aluminum fence upside down in relation to the miter gauge. This allows for you to be able to clearly read the measurements on the tape. Standard Size Miter Bar 3/4″ x 3/8″. The steel miter bar is mounted to the miter gauge and is the industry standard of 3/4″ x 3/8″. This means it will fit into most table slot miter slots. The miter bar also features spring loaded plungers that can be adjusted (with a hex key wrench) for just the right fit so you have a smooth push through every time. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.
Benchtop table saw features a 25-inch rip capacity. Features an 8.25-inch 24-tooth carbide tipped table saw blade. Includes rip fence, miter gauge, push stick, and 11-amp motor. Remember when you had the power of a table saw whenever and wherever you needed it. The WEN 11 Amp 8.25 in. Benchtop Table Saw provides a compact and portable solution for sawing straight, long cuts on larger workpieces. Our spacious table extends out for a rip-cut capacity of up to 25 in. Perfect for ripping 4×8 plywood or OSB sheets. The height adjustment wheel easily adjusts the height of the exposed blade anywhere from 0 to 2.75 in. The angle of the blade can also be adjusted for bevel cuts up to 2 in. The tool-free blade guard can be easily installed or removed as needed, while the extension arm increases the 18.9 in. X 18.4 in. Table all the way out to 18.9 in. The compact housing measures in with a footprint of a mere 15.5 in. And includes a side carrying handle for easy transportation and storage between uses. The WEN Benchtop Table Saw also includes an 8.25 in. TCT 24T blade with 5/8 in. Arbor, an adjustable rip fence, an auxiliary fence for workpieces less than 1/10 of an inch thick, a miter gauge, a push stick, a dust port adapter, a riving knife to limit kickback and onboard storage for easy organization. Amperage (A): 11 A. Bench & Stationary Tool Type: Table Saw. Corded Tool Type: Table Saw. Horsepower (HP): 1.8 hp. Included Accessories: Blade Guard System. Maximum Cut Depth at 45 Degrees in. Maximum Cut Depth at 90 Degrees in. Maximum Speed (RPM): 4500 RPM. Maximum Table Tilt – Left (degrees): 45 °. Maximum Table Tilt – Right (degrees): 45 °. Power Tool Features: Compact. Rip Capacity – Left in. Rip Capacity – Right in. Tools Product Type: Other. Work Table Surface in. Customer service is our top priority! Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. Thank you for shopping with us. We appreciate your business! If ordering electrical items outside of the U. Please note that they will come equipped with a standard U. You will need a suitable adapter to use the item in your country. An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. Only factory defects are accepted as a reason for a return. In the case of factory defects, if available, we will replace the product for you. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. We do our best to process as quickly as possible. Orders are processed immediately and dispatched to fulfillment as soon as they are received. For this reason, we are typically unable to honor cancellation requests. If the order has gone too far through the fulfillment process, we will be unable to cancel. Listed by Sku Fetch.
Excellent Aluminum Alloy Material: This table saw miter gauge fence is made of excellent aluminum alloy material, which is sturdy and wear resistant, not easy to be damaged, and has a long service life. High Accuracy: This table saw miter gauge fence features high accuracy, and the minimum adjustment accuracy is 0.002mm. Double Sided Scale: This table saw miter gauge fence features a double sided scale, with one metric side and one imperial side, which can be switched freely. Easy To Operate: This table saw fence is very easy to operate, you can align the scale as you need and cut without measuring and scribing. Wide Application: This table saw miter gauge fence is widely used for woodworking, modeling, DIY and furniture processing. Item Type: Table Saw Miter Gauge Fence Material: Aluminum Alloy Length Range: Approx. 0-850mm/0-33.46in Angle Range: 0-70 Degree. 1 x Table Saw Miter Gauge Fence. 2 x Hex Socket Screw. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
3X75 Type Telescoping Aluminum Profile Router Fence T-Track Table Saw9930. 3XMade of high-quality materials for maximum durability and reliability. Professional workmanship, exquisite, novel and unique style Model Number:Telescoping Aluminum Profile Router Fence Minimum length:50cm Up to 87CM in length Application:Wood Working Tool Tips:The product may be updated constantly, The Actual Product May Have Slight Differences Or Color Differences the color and appearance may be changed, please don’t mind. And take a consideration before place the order if you have request for color or appearance. Type:B:without Limiter Colour:Red & Black Material:Aluminum alloy Package Contents: 1 carpenter tools clamp.
WEN TT0811 11-Amp 8.25-Inch Compact Benchtop Jobsite Table Saw, Black. Powerful 11-amp motor rotates the included 8.25-inch TCT 24T blade up to 4500 RPM. Adjust both the height and angle of the blade to cut boards up to 2.75 inches thick at 90 degrees and 2 inches thick at 45 degrees. Compact design combined with onboard carrying handle make for easy storage and transportation. Remember when you had the power of a table saw whenever and wherever you needed it The WEN 11-Amp 8.25-Inch Benchtop Table Saw provides a compact and portable solution for sawing straight, long cuts on larger workpieces. Our spacious table extends out for a rip-cut capacity of up to 25 inches, perfect for ripping 4×8 plywood or OSB sheets. The height adjustment wheel easily adjusts the height of the exposed blade anywhere from 0 to 2.75 inches. The angle of the blade can also be adjusted for bevel cuts up to 2 inches thick at 45 degrees. The tool-free blade guard can be easily installed or removed as needed, while the extension arm increases the 18.9-by-18.4-inch table all the way out to 18.9 by 36 inches in size. The compact housing measures in with a footprint of a mere 15.5 by 23 inches, and includes a side carrying handle for easy transportation and storage between uses. The WEN Benchtop Table Saw also includes an 8.25-inch TCT 24T blade with 5/8-inch arbor, an adjustable rip fence, an auxiliary fence for workpieces less than 1/10 of an inch thick, a miter gauge, a push stick, a dust port adapter, a riving knife to limit kickback, and onboard storage for easy organization. Remember when you had a saw that could really rip Remember.
WoodRiver Snap-Set Miter Gauge Fence Combo with Flip-Stop, 163732, Positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90° in both directions, Adjustable miter bar fits snug inside standard 3/4″ x 3/8″ miter slots, 17-1/2″-long anodized aluminum fence rail adjusts along miter gauge head, Flip-stop adjusts along the fence for repeatable accuracy, You will find that Angle adjustments are a “snap with the Snap-Set Miter Gauge and Fence System! This System is comprised of a precision pivoting miter gauge made from steel plate, and it features 13 positive stops at 0°, 22-1/2°, 30°, 45°, 60°, 67-1/2° and 90° in both directions. These positive stops are simple to adjust with a spring-loaded plunger stop that “snaps” in the machined holes. Any angle between 0°-90° can also be set as needed with. WoodRiver Snap-Set Miter Gauge Fence Combo with Flip-Stop – 163732 by WoodRiver You will find that Angle adjustments are a “snap” with the Snap-Set Miter Gauge and Fence System! Any angle between 0°-90° can also be set as needed with the large clamping knob. A 17-1/2-long clear anodized aluminum alloy fence is fitted with an adjustable flip-stop for repeatable accuracy. The fence can be calibrated easily by sliding along the miter gauge head and held true with two thumb screws. The miter bar can be fitted to a standard 3/4″ x 3/8″ table slot using unique spring-loaded rollers that keep the bar tight against one side of the miter slot. A T-slot washer is included for wider crosscut operations. You can trust the Snap-Set Miter Gauge and Fence System to improve safety and accuracy when crosscutting or cutting miters on the table saw, as well as when routing end grain or miters on the router table. Positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90° in both directions. Adjustable miter bar fits snug inside standard 3/4″ x 3/8″ miter slots. 17-1/2-long anodized aluminum fence rail adjusts along miter gauge head. Flip-stop adjusts along the fence for repeatable accuracy. Improve safety and accuracy on the table saw and the router table UPC: 844788055377 PA34-05 miter, mitre, gauge, gage, index.
