Genuine OEM Replacement Part # 2610950106-2PK. Consult owners manual for proper part number identification and proper installation. Bosch 2 Pack Of Genuine OEM Replacement Rip Fences, 2610950106-2PK. Includes (2) 2610950106 Rip Fences. Please refer to list for compatibility. Compatible with the following: Bosch models: 4100, 4100DG-09 Worksite, 4100DG-09 Worksite, 4100-09 Worksite, 4100-09 Worksite. Signature Confirmation required to P. Boxes and APO’s. We will make every effort to correct the situation. We are Authorized Distributors, our products carry full manufacturers warranties (applicable to all NEW items). This will be clearly stated on the listing. Tool Supply Direct 34490 Melinz Parkway Eastlake OH 44095.
These are parts from a Delta Table Saw (Model # 36-540 Type 2) I bought new years ago. The motor finally gave up and I stripped the saw of these parts to sell to someone that might need them. RIP FENCE – Used but still in good shape. As you can see from the pics, it was bumped into the blade at one time, but it is minor and does not affect the function at all. BLADE GUARD – Took off and put up when the saw was new and it’s good as new! BLADE ELAVATION HANDLE – Used, very good condition. BLADE ANGLE LEVER – Used, very good condition. BLADE THROAT PLATE – Used, very good condition. SWITCH COVER BOX – Used, very good condition. USER MANUAL & PARTS SHEET INSERT – In great condition! And one part I can’t remember where it went…
Genuine OEM Replacement Part # 5140060-89-2PK. Consult owners manual for proper part number identification and proper installation. Dewalt 2 Pack Of Genuine OEM Replacement Fences, 5140060-89-2PK. Includes (2) 5140060-89 Fences. Please refer to list for compatibility. Compatible with the following: DeWALT: DW745, DW745. Signature Confirmation required to P. Boxes and APO’s. We will make every effort to correct the situation. We are Authorized Distributors, our products carry full manufacturers warranties (applicable to all NEW items). This will be clearly stated on the listing. Tool Supply Direct 34490 Melinz Parkway Eastlake OH 44095.
Roller sliding tenon setting, when pushing the plate for cutting, the roller plays the role of driving the plate forward. Upgrade lengthen size meets different machine needs. Compatible with #19mm #30mm standard T-slot track. Using the Thin ri Guide is so easy. Jut slide the guide into the T-track miter slot of your table saw and lock it a few inches in front of the saw blade. Set the dimension you wan on the laser-engraved scale, lock your fence so your stock is just touching the bearings and make the cut. Calibrating the scale to your saw couldn’t be simpler. Just bring the bearings up until they touch the tooth of the saw blade and adjust the sale indrcator to the nearest mark. Now you can set the dimension without having to compensate for the thickness ofyou saw blade. Scales for both milimeter and inches arelsrer engraved on the anodized aluminum body to the same tolerance. The Thin Guide is machined from aluminunm alloy. Durable and long service life. Product name: Thin Table Saw Jig. Range of application: Woodworking range of use. Package Included: 1 x Guide Jig.
Blade operates at 4,800 RPM with 15 Amp motor. Tool free blade guard installation. Blade, miter gauge, push stick, rip fence, acc storage included. The ALL New GENESIS 10 in. 15 Amp Table Saw is perfect for your next DIY project around the home or shop. It features an Extra Large 26 in. Die-Cast Aluminum Table and Self-Aligning Rip Fence that simultaneously locks at the front and rear of the table Saw. The no-load speed of the blade is 4,800 RPM and you can perform Bevel Cuts From 0° to 45°. The GENESIS : 40T Carbide Tipped Blade, Rip Fence, Miter Gauge, Aluminum Guide, Push Stick, Wrenches and Heavy-Duty Metal Stand. Amperage (A): 15 A. Bench & Stationary Tool Type: Table Saw. Dust Collection Method: 2 in. Horsepower (HP): 2 hp. Included Accessories: Anti-Kickback Prawl, Blade Guard System, Blade(s), Miter Fence, Rip Fence, Stand. Maximum Cut Depth at 45 Degrees in. Maximum Cut Depth at 90 Degrees in. Maximum Speed (RPM): 4800 RPM. Maximum Table Tilt – Left (degrees): 45 °. Maximum Table Tilt – Right (degrees): 0 °. Power Tool Features: Blade Guard System, Depth Adjustment, Depth Gauge. Rip Capacity – Left in. Rip Capacity – Right in. Work Table Height From Floor in. Work Table Length in. Work Table Surface in. : 26 in x 10 in. Work Table Width in. Customer service is our top priority! Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. Thank you for shopping with us. We appreciate your business! If ordering electrical items outside of the U. Please note that they will come equipped with a standard U. You will need a suitable adapter to use the item in your country. An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. Only factory defects are accepted as a reason for a return. In the case of factory defects, if available, we will replace the product for you. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. We do our best to process as quickly as possible. Orders are processed immediately and dispatched to fulfillment as soon as they are received. For this reason, we are typically unable to honor cancellation requests. If the order has gone too far through the fulfillment process, we will be unable to cancel. Listed by Sku Fetch.
STRONG MATERIAL: Table saw miter fence is made of aluminum alloy, can resist wear, maintain lasting accuracy, suitable for woodworking, modeling, and furniture processing 2. DOUBLE SIDED SCALE: The miter gauge fence system is equipped with two scales in metric(mm) and imperial(inch), which are clearly marked for easy reading of values 3. TELESCOPIC FENCE: The main length of the miter gauge fence is 560mm and can be extended to 950mm. High accuracy machining, the minimum adjustment accuracy can up to 0.002mm 4. WIDELY USED: The table saw fence matches the bevel gauge commonly used in the market, and the center line of the T groove is 38mm(1.5in) from the back substrate 5. MULTI FUNCTIONS: This multi t track can be used for a wide assortment of woodworking projects, including creating general fixtures and jigs, workstations. Item Type: Miter Gauge Fence Material: Aluminum alloy Adjustable Length: Approx. 560 950mm / 22.05 37.4in Center Line From Back Substrate: Approx. 38mm / 1.5in. 1 x T Slot Rail 1 x Limit Stop 2 x Slider 2 x Handle 1 x Hex Wrench. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
Fencepro FP4 – Featherboard for Table Saws – EVA Feathers That Reduce Kickback – for Use on Fences for Table, Router or Band Saws – Woodworking Tools and Safety Accessories – Pack of 2. 11.45 x 7.8 x 2 inches. Outside; Professional, Amateur, Professional, Inside; Professional. Kickback Prevention: FencePRO virtually arrests kickback. EVA material combines with our living hinge design to pinch board against the table and absorb kickback forces. 5x greater kickback resistance versus plastic or wood feathers. Ultimate Feed Control: EVA feathers increase the amount of surface contact on the work piece, ensuring a smoother glide and superior infeed control. Substantially reduces wiggle you get with plastic feathers. Cleanest Cut: EVA Feathers absorb vibration and minimize chatter for a cleaner cut. Feathers are non-marring on even the softest woods. EVA Feather Features and Safety: Feathers are Reversible and Replaceable. Feathers will not harm carbide blades or router bits in case of accidental contact. Feathers conform slightly to the wood. EVA will NOT set off Saw Stop. EVA will NOT absorb fluid as it is a closed cell material. EVA will NOT bleed color or shed material. Hardware: FencePRO has a 4? Travel slot comes with two Comfortable Ergonomic Knobs. Mounts to T Track. T Bolts fit 1/4? To 3/4? T Track; Use Two 1 1/2? T Bolts when used as individual Fence Featherboards, Use One 2 1/4? T Bolt when stacked, (5/16-18 thread), T Bolt Head Dimensions:. Kickback Prevention and Feed Control. The FP4 FencePRO Featherboards from BOW Products. Features EVA feathers which have revolutionized Featherboard performance and safety. The FencePRO Featherboards mount easilty to your table fence to provide downward pressure during cutting. FencePRO contains two individual Fence Featherboards and can also be stacked using the 2 1/4? T Bolt provided. Each FencePRO contains a 4? Travel Slot. FencePRO EVA feathers virtually arrest kickback; something you don’t get from plastic feathers. Safety and Precision – The BOW Product Difference. The video showcases the product in use. The video guides you through product setup. The video compares multiple products. The video shows the product being unpacked. The FeatherDUO includes all of the benefits as our FeatherPRO FP1, but in a stackable platform. Check out the video on the FP1 for all the ways this featherboard will improve the safety and performance of your woodworking projects. What sets BOW Products featherboards apart from others? The principal difference with Bow Featherboards is the use of EVA for the feathers combined with our living hinge feather design. These 2 features combined create safer and more durable woodworking products and accessories. EVA is an industrial grade super strong material that is pliable yet has memory. EVA closed-cell technology is firm, durable, and will not shed or bleed color. Less rigid than hard plastic, EVA absorbs vibration and will give before it mars wood. Why is EVA better than plastic for featherboards? While plastic feather boards can mar and damage soft woods, EVA is soft and strong enough to protect your workpiece. It conforms slightly to the wood for improved infeed control. EVA also absorbs vibration and chatter for a cleaner cut. How does EVA help protect your tools? If EVA feathers accidentally contact a blade or router bit, it simply cuts through without a violent reaction. It will not harm the cutter. Simply replace the EVA feathers and the featherboard is as good as new. How does EVA help prevent kickback? As kickback occurs, the EVA feather moves back and pinches the wood against the fence absorbing kickback forces until our living hinge stops it while the feather is at its furthest extension. This virtually arrests kickback, protecting you from harm. See All Feather Boards From BOW Products. 4.6 out of 5 stars. 4.7 out of 5 stars. Fences for Table Saws. Table Saws, Routers, Fences. Table Saws, Band Saws, Routers. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.
With this Miter gage you get 27 Precision determined Stop Positions (every 5 degrees from 0 to 60 degrees in both directions plus additional at 22.5 degrees, useful for 8 sided Octagons). Unlike the stock miter gage that comes with most equipment, this gage is designed for precise repeatable angles after it is dialed into your machine. The miter bar is designed for a snug fit in Machines with a 3/4 by 3/8 inch miter slot. It will also work with a 3/43/8 inverted T slot. The Three inch by 24 inch precision fence With then Miter gage you get 27 Precision determined Stop Positions every 5 degrees from 0 to 60 degrees in both directions plus additional at 22.5 degrees, useful for 8 sided Octagons. The fence mounting slots in the protractor head are designed to work with our 24 inch precision aluminum fence with stop, our 18 inch Box Joint Fence, or most commercially available fences available from other manufactures. Made from heavy gage Aluminum and steel. Includes Instructions for the miter gage as well as the fence options The Fence and Stop are substantial and well made 24 inch nominal (23.6 actual) by 3 inch high for great work support. The curser on the Stop allows for precise repeatable measurements.
