Table Saw Precision Miter Gauge System Multi-Track Fence with 27 Angle Stops. Cross-cut and miter cut w/ featured stops and without calibration. Miter Gauge Features 27 angle indexing stops. Delivers exceptional cut-length control. This 3-piece set was designed to. You with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops and without calibrating. Set Contains the Following: (1) High Precision Miter Gauge (1) Multi Track Fence with Scale 24 inch. By x 3 inch tall (1) 3 T-Track Flip Stop (multi position) Miter Gauge Features. 27 angle indexing stops. A multi-functional 45 Degree setting. 4 expansion discs that adjust to remove all side play. A removable plates that can be used with t-track miter slots. Ideally Used With: T-Track.
The Table Saw Precision Miter Gauge System by POWERTEC. Box shows damage to top; product has been inspected and is New in Box. This 3-piece set was designed to provide you with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops and without calibrating. INCLUDES: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop. Function: Cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results. High precision miter gauge: Features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right. Multi-track miter fence: Smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4″-20 hex Bots, 1/4″ t-bolts and 5/16 T- bolts. Miter saw flip stop: Delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right. Set Contains the Following. (1) High Precision Miter Gauge. (1) Multi Track Fence with Scale (24 inch long by x 3 inch tall). (1) 3 inch T-Track Flip Stop (multi position). 27 angle indexing stops. A multi-functional 45 Degree setting. 4 expansion discs that adjust to remove all side play. A removable plates that can be used with t-track miter slots. Works in standard ¾” x 3/8″ miter slot, with or without t-slots. The gauge can be used as is, with a sacrificial fence, or with the included 24″ x 3″ multi -track fence. Laser engraved 24 scale, right to left. 24″ x 3″ tall multi-track (fence section). Made out of anodized extruded aluminum for strength and durability. Universal t-track slots that accept 1/4″-20 hex bots, 1/4″ t-bolts and 5/16 t- bolts. Possesses optimal versatility as a miter gauge fence, router or shaper fence and table saw sub-fence, chop or radial arm saw fence. Can work as a right or left stop. Tongue firmly locks into track to clamp down and prevent unnecessary movement. Anodized aluminum body and a move-able stop arm (measuring at 3″ x ¾”x 5/16). Puts the control in your hands, allowing you to set whether it works with the extruded fence face or you can set it to work with a sacrificial fence. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.
Table Saw Precision Miter Gauge System Multi-Track Fence. Cross-cut and miter cut w/ featured stops and without calibration. Miter Gauge Features 27 angle indexing stops. Delivers exceptional cut-length control. This 3-piece set was designed to provide you with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops and without calibrating. Set Contains the Following: (1) High Precision Miter Gauge (1) Multi Track Fence with Scale (24 inch long by x 3 inch tall) (1) 3 T-Track Flip Stop (multi position) Miter Gauge Features. 27 angle indexing stops. A multi-functional 45 Degree setting. 4 expansion discs that adjust to remove all side play. A removable plates that can be used with t-track miter slots. Works in standard ¾” x 3/8″ miter slot, with or without t-slots. The gauge can be used as is, with a sacrificial fence, or with the included 24″ x 3″ multi -track fence Fence Features. Laser engraved 24 scale, right to left. 24″ x 3″ tall multi-track (fence section). Made out of anodized extruded aluminum for strength and durability. Universal t-track slots that accept 1/4″-20 hex bots, 1/4″ t-bolts and 5/16 t- bolts. Possesses optimal versatility as a miter gauge fence, router or shaper fence and table saw sub-fence, chop or radial arm saw fence Flip Stop Features. Can work as a right or left stop. Tongue firmly locks into track to clamp down and prevent unnecessary movement. Anodized aluminum body and a move-able stop arm (measuring at 3″ x ¾”x 5/16). Puts the control in your hands, allowing you to set whether it works with the extruded fence face or you can set it to work with a sacrificial fence. Includes: 1 table saw miter gauge, 1 multi-track miter fence, 1 T-track flip stop. Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while guaranteeing quick and accurate project results. High precision miter gauge: features 27 angle indexing stops with 1° step spacing and positive stops at 0°, 10°, 22-1/2°, 30° and 45° and 9 others, both left and right. Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4 in. 20 hex bots, 1/4 in. T-bolts and 5/16 in. Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right. Power Tool Accessory Type. 3.0 inches x 4.12 inches x 24.5 inches. Weight: 5.8 lb.
POWERTEC 71395 Taper/Straight Line Jig for Table Saws with 3/4″ Wide by 3/8″ Deep Miter Slot. ASSEMBLY CONTAINS: 36 Miter Bar, Base, Adjustable Fence, Knob, Hold Down Clamps, Tape Measure, Abrasive Grip Strips, T-Bolts, Hardware Screws, Washers and Mini Screw Driver. FUNCTIONS: Primarily serves as a taper cutting jig for table saw – Secondarily operates as a stable straight line ripping jig – Your creativity is the limit. PREMIUM BUILD: This woodworking taper jig is manufactured with high quality components; The base measures 32″ x 7-7/8″ ½ with MDF construction and melamine coating on both sides; Features a safe and easy-to-use design, indexing marks for easy angle setting, 5 star knobs and hold down clamps to prevent shifting stock, abrasive grip strips to help stabilize your workpiece and detailed instructions for all skill levels. VERSATILE: Perfect for cutting tapered compound angles, straight line table saw ripping, making handmade furniture, and a wide range of applications such as making chair legs, building tables, custom built shelves or base cabinets and more. PLEASE NOTE: It fits tight and securely in any standard 3/8″ x 3/4″ miter slot. PLEASE NOTE: The taper jig will fit full sized table saws with miter slots ¾”x3/8″ and with inside edge of the right miter slot between 3-3/4″ to 4-3/8″ or 5″ to 5-5/8″ from the blade and may not be compatible with many job site or bench top saws. Please check your saw before ordering. Introducing the Taper / Straight Line Jig by POWERTEC. This multi-functional woodworking taper jig is designed to make quick, easy and high precision tapered cuts. All-Inclusive, it features everything you need to safely cut long, angled tapers and straight edges along your board and workpiece. It fits tight and securely in any standard 3/8″ x 3/4″ miter slot and features an ergonomic handle for seamless push-action performance throughout the cutting process. The jig assembly features: Indexing marks for simplistic angle setting Abrasive grip strips to stabilize your stock Non-marring caps on the clamps to prevent damage 5 Star Knobs to comfortably anchor your stock without stripping or damaging Hold down clamps to prevent your workpiece from moving and drifting from your fence Package Contents 1 – Base 32″ x 7-7/8″ ½” MDF with melamine coating on both sides 1 – Adjustable fence 2-1/2″ wide x 1-1/32″ thick by 32″ long MDF, melamine coating on both sides, a pre-assembled t-track, and pre-assembled stop plate 1 – Aluminum miter bar ¾”x 3/8″ x 36″ 1 – Tapered knob, 4″ long 2 – Hold Down Clamps, 5-1/2″ long 4 – Five Star knobs 2 – Tape Measure with self-adhesive back 3 – Abrasive grip strips, 1-1/2″ x 7″ 4 – T-Bolts, 5/16-18 x 2-1/2″ 1 – 5/16-18 x 1″ flat head screw 3 – ¼”-20 x ¾” screw 5 – 5/16″ washers 9 – Nylon adjustment screws, #10-32 1 – Mini screw driver. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store.
Cross-cut and miter cut w/ featured stops and without calibration. Miter Gauge Features 27 angle indexing stops. Delivers exceptional cut-length control. This 3-piece set was designed to provide you with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops and without calibrating. Set Contains the Following: (1) High Precision Miter Gauge (1) Multi Track Fence with Scale (24 inch long by x 3 inch tall) (1) 3 T-Track Flip Stop (multi position) Miter Gauge Features. 27 angle indexing stops. A multi-functional 45 Degree setting. 4 expansion discs that adjust to remove all side play. A removable plates that can be used with t-track miter slots. Works in standard ¾” x 3/8″ miter slot, with or without t-slots. The gauge can be used as is, with a sacrificial fence, or with the included 24″ x 3″ multi -track fence Fence Features. Laser engraved 24 scale, right to left. 24″ x 3″ tall multi-track (fence section). Made out of anodized extruded aluminum for strength and durability. Universal t-track slots that accept 1/4″-20 hex bots, 1/4″ t-bolts and 5/16 t- bolts. Possesses optimal versatility as a miter gauge fence, router or shaper fence and table saw sub-fence, chop or radial arm saw fence Flip Stop Features. Can work as a right or left stop. Tongue firmly locks into track to clamp down and prevent unnecessary movement. Anodized aluminum body and a move-able stop arm (measuring at 3″ x ¾”x 5/16). Puts the control in your hands, allowing you to set whether it works with the extruded fence face or you can set it to work with a sacrificial fence. Ideally Used With: T-Track. Power Tool Accessory Type: Saw Accessories. Tools Product Type: Power Tool. Customer service is our top priority! Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. Thank you for shopping with us. We appreciate your business! If ordering electrical items outside of the U. Please note that they will come equipped with a standard U. You will need a suitable adapter to use the item in your country. An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. Only factory defects are accepted as a reason for a return. In the case of factory defects, if available, we will replace the product for you. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. We do our best to process as quickly as possible. Orders are processed immediately and dispatched to fulfillment as soon as they are received. For this reason, we are typically unable to honor cancellation requests. If the order has gone too far through the fulfillment process, we will be unable to cancel. Listed by Sku Fetch.
The Table Saw Precision Miter Gauge System by POWERTEC. This 3-piece set was designed to provide you with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops and without calibrating. INCLUDES: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop. Function: Cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results. High precision miter gauge: Features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right. Multi-track miter fence: Smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4″-20 hex Bots, 1/4″ t-bolts and 5/16 T- bolts. Miter saw flip stop: Delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right. Set Contains the Following. (1) High Precision Miter Gauge. (1) Multi Track Fence with Scale (24 inch long by x 3 inch tall). (1) 3 inch T-Track Flip Stop (multi position). 27 angle indexing stops. A multi-functional 45 Degree setting. 4 expansion discs that adjust to remove all side play. A removable plates that can be used with t-track miter slots. Works in standard ¾” x 3/8″ miter slot, with or without t-slots. The gauge can be used as is, with a sacrificial fence, or with the included 24″ x 3″ multi -track fence. Laser engraved 24 scale, right to left. 24″ x 3″ tall multi-track (fence section). Made out of anodized extruded aluminum for strength and durability. Universal t-track slots that accept 1/4″-20 hex bots, 1/4″ t-bolts and 5/16 t- bolts. Possesses optimal versatility as a miter gauge fence, router or shaper fence and table saw sub-fence, chop or radial arm saw fence. Can work as a right or left stop. Tongue firmly locks into track to clamp down and prevent unnecessary movement. Anodized aluminum body and a move-able stop arm (measuring at 3″ x ¾”x 5/16). Puts the control in your hands, allowing you to set whether it works with the extruded fence face or you can set it to work with a sacrificial fence. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.
17″ to 34″ Telescoping Fence. INCLUDES: (1) Telescoping Fence, 3″x 1- 3/8″x 17″ with a 3″ end that extends 17″, extendable to 34″ Max. FUNCTION: With this telescopic extension fence, you can achieve accurate miter cuts on the table saw or router table. Fence telescopes from 17 inches to a full 34 inch length. FEATURES: The Fence is equipped with a high quality 12 Movable Scale. Calibrate the scale by using the corner edge of the flip stop (not included) to identify the alignment point. Tighten the adjustment knob on the flip stop to secure in place. VERSATILE: Accommodates a wide range of miter gauges and flip stops including POWERTEC 71142, 71143, 71767. If using other miter gauges, please note that the fence mounts to the face of the miter gauge with t-bolts. The center line of the t-slot is 1-11/16 from the bottom of the fence. Please check your miter gauge to verify that it will fit. PREMIUM GRADE: Made of solid aluminum with hardened anodized surface, making the fence strong, durable, and resistant to corrosion. It also provides a smooth, wear-resistant surface that is easy to clean. This telescoping fence is the perfect tool for achieving accurate miter cuts on your table saw or router table. The fence telescopes from 17″ to a full 34″, giving you the flexibility to make cuts on a variety of materials, workpieces and woodworking applications. The telescopic fence can be attached to either side of the miter gauge, making it easier to adjust and tighten the fence. The top and front universal T-slots allow you to install the flip stop or other accessories (not included) for cutting on table saws and router tables. The lever knob allows you to adjust the length of the fence quickly and lock it into place precisely. This makes it possible to make precise cuts at different lengths on a table saw. The fence is equipped with a high-quality 12 movable scale, which allows you to make precise measurements and adjustments. The scale can be calibrated by using the corner edge of the flip stop (not included) to identify the alignment point. Once the scale is calibrated, you can tighten the adjustment knob on the flip stop to secure it in place. Extends from 17″ to 34″. High-quality 12 movable scale. Calibrated with the corner edge of the flip stop (not included). Made of solid aluminum with hardened anodized surface. Premium Build and Design. The telescoping fence is made of solid aluminum with a hardened anodized surface, making it strong, durable, and resistant to corrosion. The anodized surface also provides a smooth, wear-resistant surface that is easy to clean. (1) Telescoping Fence, 3″x1-3/8″x20″ (Including the 3″ End). (1) 12 Movable Scale. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.
Made from extruded aluminum for enhanced durability. Compact and lightweight with user-friendly clamp knobs. Durable, lightweight, corrosion-resistant clamps. Introducing The Universal Fence Clamps by POWERTEC. These compact, yet lightweight clamps are designed to fit and secure a wide variety of shop made auxiliary fences (from 3/4 to 5-3/4 inches thick), while preventing interference of other accessories while you work. Perfect for your everyday woodworking needs, they work well with table saws, router fences, and drill press tables. High Precision Design for Professional Results The clamp features a pin (arm) conveniently designed to fit into a standard 3/8 hole drilled in the top of the auxiliary or sacrificial fence. Thoroughly tested for a precise fit, the clamp arm/pin is formed at 85 degrees (instead of 90 degrees) to help pull the auxiliary fence, tight against the fence. This is important during the tightening phase to allow the board to be pulled firmly against the fence, offering just enough joint flexibility. Additionally, the clamp was crafted with an application layout that keeps it out of the way, clear from your existing attachments. It’s practical design reduces the need for wood screws, bulky clamping options and undesirable results. In many cases, the clamp’s arrangement improves workflow by eliminating time spent adjusting or maneuvering jigs and fittings. Hand Tool Type: Clamp. Tools Product Type: Hand Tool. Customer service is our top priority! Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. Thank you for shopping with us. We appreciate your business! If ordering electrical items outside of the U. Please note that they will come equipped with a standard U. You will need a suitable adapter to use the item in your country. An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. Only factory defects are accepted as a reason for a return. In the case of factory defects, if available, we will replace the product for you. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. We do our best to process as quickly as possible. Orders are processed immediately and dispatched to fulfillment as soon as they are received. For this reason, we are typically unable to honor cancellation requests. If the order has gone too far through the fulfillment process, we will be unable to cancel. Listed by Sku Fetch.
The Universal Table Saw Miter Gauge by POWERTEC. This compact, yet premium miter gauge is designed to provide you with a highly accurate and durable solution to your table saw angled cuts and cross cutting needs. It features positive stops at all common angles with a total of 27 angle stops for high precision incremental control. INCLUDES: (1) Miter Gauge for Table Saw. FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts. FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit. PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts. UNIVERSAL DESIGN: Suited for most standard miter slots (3/4″ width x 3/8″ depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. It is designed to work with most standard table saws or machines with a 3/8″ x 3/4″ miter slot with or without t-slots. This includes the POWERTEC line of saws, along with other popular table saw brands. Along with exceptional miter cutting accuracy, the positive stops are ideal for an assortment of woodworking projects – as they feature the angles more commonly used. Offering 27 lockable angle stops in 5° increments over an entire 180° range, this allows for plus or minus 60° range miter cuts. PLUS. There are even more angled options that are clearly indexed (though not lockable) and easy to follow. Our miter gauge possesses a rugged laser-cut aluminum construction with a lightweight design to ensure exceptional performance, accuracy and long-term durability. The large gauge handle bears an EZ-grip design for strength and comfort. The protractor head is bottom-coated with nylon for easy glide-ability. For added convenience, the universal fence mounting brackets offer you the option to configure an auxiliary fence in square alignment to your worktable. Additionally, the removable retainer plate works with T-slotted miter slots and prevents the miter bar from accidentally lifting or flipping when feeding your stock through. This premium tool comes in a compact size, but delivers a huge impact on your woodworking projects. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.
Introducing the Table Saw Small Parts Sled by POWERTEC. INCLUDES: Table Sled Body and Zero Clearance Fence, Miter Slot Stop and Knobs, Miter Bar, Blade Guard, Screwdriver and Installation Hardware. FUNCTION: This little sled is ideal for making high precision, small cuts on difficult woodworking projects with optimal safety for your fingers while cutting stock. FEATURES: Adjustable rear-mounted blade guard fits most table saws, a fence and base that allows you to run the saw through the width of material that is removed during the cutting process. 100% SAFETY: The sled also comes with a miter safety stop plate to prevent forward travel and is designed to keep your fingers clear of danger, allowing you to cut with confidence. PREMIUM QUALITY: Most table saw small parts are made with high quality aluminum for durability; with an MDF zero clearance board. This small cross-cut sled allows you to cut work material pieces to length with your table saw. It keeps fingers clear of danger and lets you cut with confidence. Ideal for cutting dowels, stock and small shapes at a precise 90 ° angle, with little or no tear-out. The sled has zero clearance support, reducing the likelihood that small pieces will get stuck between the blade and the throat plate or fall through completely. The sled’s miter safety stop plate limits its forward movement. The drop-off is carried away from the blade by a small plastic ramp on one side of the kerf. The components are made with a protective coated MDF and high quality aluminum to withstand the abrasive nature of woodworking and for long-term durability. Please Note: The table saw small parts sled is intended for use on table saws with a 3/4″ x 3/8″ miter slot. MDF Zero Clearance Insert. Miter Safety Stop Plate with Star Knob. Hardware Bolts and Flat Screws. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.
