DeWalt Fence Assembly #DWB-5140136-20.
Magswitch Woodworking Tools Starter Kit and Accessories, with Featherboard
Posted by adminDec 5
Magswitch Woodworking Tools Starter Kit and Accessories, with Featherboard, Mounting Push Block, and Welding Magnetic Base Clamp Holder for Table Saw Jig, Router Table, Jointer and Band Saw, Yellow. Contact Type: Normally Open. Item dimensions L x W x H: 8.5 x 6.3 x 2.1 inches. Actuator Type: Push Button. Number of Positions: 3. Controller Type: Push Button. Switch TypeMaterial: Push ButtonPlastic, Metal. Mounting TypeSpecification Met: Mounts to steel tables or cast iron fencesIp54. STARTER KIT: Your ideal Feather Board that works with any push block for safe woodworking tablesaw cuts. Quick and easy with a low profile design for use with your smallest tablesaw or coping sled. Makes your diy crafts faster, safer and easier and is a great addition to your wood and carpenter equipment tools. UNIVERSAL MOUNTING BASE: The universal mounting base is the centerpiece of the carpentry workholding system. Simply add the desired wood working tool attachment, place on any steel saw bench or cast-iron welding table, and you are ready to start your framing and cabinet work. REVERSIBLE FEATHERBOARD: Our sturdy yet lightweight woodworking feather board jig is reversible for left and right hand feeds. Also infeed and outfeed applications. Add desired attachments to fit any router table track fence for safety and protection against kickbacks. MAGJIG: Easily secure your kit in place with two strong magnet 150 lb holding force clamps. The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Magnetic grip turns all the way off for quick release. EASY TO CLEAN: Powerful Magnet stays clean unlike traditional magnetic squares that hold on to metal chips even when off, with our heavy duty magnet you won’t cut your fingers cleaning away steel shavings and debris. Kit disassembles for very easy cleaning. Reversible featherboard for left or right feeds, with instant on off grip for fast set up, with precise tensioning. Small profile to work on Band Saws, Fences, and small tables. Place anywhere on the table or fence (steel or cast iron). Use the Jigs separately on your own jigs or fixtures. Add all the Workholding system attachments now that you have the Universal Base and Mag Jigs.
Comments Off
Filed under: magswitch | Tagged as: accessories, featherboard, magswitch, starter, tools, woodworking
Grizzly Table Saw G1022 Rip Fence Guide Rails withspcl bolts also Delta Contractor
Posted by adminDec 4
Grizzly Table Saw G1022 Rip Fence Guide Rails w/spcl bolts also Delta Contractor. The rail diameter is 1 3/8 diameter. The length is 44 1/4 long. The spacing of the mounting holes is 7 1/2 at each end (4 holes per rail). Rails are very straight. The rear rail had considerable surface rust which was wire brushed. Some minor pitting is evident on the rear rail, please see photos. The front rail had minor surface rust also which was wire brushed. Both were treated with WD-40. The rack gearing in the front rail is in very good condition. One of the 4 plastic end caps is missing.
Miter Gauge Fence System Extended Support for Furniture DIY Processing
Posted by adminDec 4
Clothing, Shoes & Accessories. Cell Phones & Accessories. Miter Gauge Fence System Extended Support for Furniture DIY Processing. Double Sided Scale? Miter Gauge Fence System Equipped with two metric (mm) and inches (inch) scale. Telescoping Fence? The main body length is 560mm, but can be extended to an 941mm. Premium Material? Table Saw Miter Gauge fence is made of aluminum alloy, great for woodwork, modeling, DIY and furniture processing. High Accuracy? High precision finishing, the minimum adjustment accuracy can reach 0.002 mm. Widely Used? Table saw fence is Match the commonly used bevel gauge on the market, the center line of the T slot is 38MM (1.5 inches) from the bottom of the backing. 1 set Miter Gauge Fence. Please allow slightly errors due to manual measurement and different monitors. Please pay what you win in 7 days. Because the unpaid dispute will not be closed automatically, and we may ignore it. Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses. We are committed to give you the best customer service possible. Please let us work on the issues. We’d like to settle any problem in a friendly manner. Due to the difference of time zone between Hong Kong and your location, sometimes the answer will be delayed. It’s just take you 1 minute. People always bought together with.
Woodworking Tools Starter Kit and Accessories, with Featherboard, Mounting
Posted by adminDec 4
Woodworking Tools Starter Kit and Accessories, with Featherboard, Mounting Push Block, and Welding Magnetic Base Clamp Holder for Table Saw Jig, Router Table, Jointer and Band Saw, Yellow. STARTER KIT: Your ideal Feather Board that works with any push block for safe woodworking tablesaw cuts. Quick and easy with a low profile design for use with your smallest tablesaw or coping sled. Makes your diy crafts faster, safer and easier and is a great addition to your wood and carpenter equipment tools UNIVERSAL MOUNTING BASE: The universal mounting base is the centerpiece of the carpentry workholding system. Simply add the desired wood working tool attachment, place on any steel saw bench or cast-iron welding table, and you are ready to start your framing and cabinet work REVERSIBLE FEATHERBOARD: Our sturdy yet lightweight woodworking feather board jig is reversible for left and right hand feeds. Also infeed and outfeed applications. Add desired attachments to fit any router table track fence for safety and protection against kickbacks MAGJIG: Easily secure your kit in place with two strong magnet 150 lb holding force clamps. The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Magnetic grip turns all the way off for quick release EASY TO CLEAN: Powerful Magnet stays clean unlike traditional magnetic squares that hold on to metal chips even when off, with our heavy duty magnet you won’t cut your fingers cleaning away steel shavings and debris. Kit disassembles for very easy cleaning Reversible featherboard for left or right feeds, with instant on off grip for fast set up, with precise tensioning Small profile to work on Band Saws, Fences, and small tables.
Comments Off
Filed under: woodworking | Tagged as: accessories, featherboard, mounting, starter, tools, woodworking
BOW Products XT 36 Fence T-Track Table Fence System with Multipurpose XT536
Posted by adminDec 3
BOW Products XT 36 Fence T-Track Table Fence System w/ Multipurpose XT536 Enhance any Table Saw with Greater Capabilities Feed Control and Safety. Please understand this is out of our control. PLEASE NOTE IMPORTANT: Our pickups are commercial pickups, the truck comes and takes items by the pallet, this means, it will not scan in like it would if you drop at post office. This very often causes a delay in the first scan. However, our distribution center has progressively gotten worse at scanning these in. Often, we will see scans that skip KC entirely and don’t get scanned in until it reaches buyers local distribution center. Obviously, this is inconvenient to not have updated tracking the entire process, but most of our packages get delivered within a very timely matter and ones that don’t are out of our control.
Saw Miter Gauge Aluminum Miter Fence Laser Marking for Band Saw, Router Planers
Posted by adminDec 3
Table Saw Miter Gauge. Metric and Imperial Scale & Aluminum Alloy & 60 Angle Adjustable. The aluminum miter gauge is a high-precision woodworking tool. The 60-degree fence ends for max. Adjustable flip stop, small block, and fine-tuning block are the perfect complement to each other for your table saw cutting needs. Simple & Secure Operation. Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. The table saw miter gauge all-aluminum guide rod, and all-aluminum baffle can be modified and expanded, sturdy and security. Thickened removable plates to prolong service life. Works in a standard ¾” x 3/8″ miter slot, convenient for your work. Our crosscut sled is equipped with a laser marking scale, metric and imperial scales provide convenient operation. Besides, high accuracy is provided. Universal t-track slots that accept 3 hex bots, 4 t-bolts for your flexible adjustment. The aluminum miter fence is equally well-thought-out with its 60 degree ends for unsurpassed workpiece support and its ability to be mounted to almost any miter gauge. Besides, The fixed stop allows adjusting at any specified angle you need. This saw gauge also includes a handy aluminum flip stop for repetitive angled cuts on your table saw. Delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right. After loosening the trim block with an Allen wrench, the fine adjustment block can be moved forth and back to control the length accurately. Tongue firmly locks into track to clamp down and prevent unnecessary movement. The table saw guide is widely used in woodworking DIY, perfect for wood cutting projects. It can be used for table saws, band saws, router planers, and lock stitch machines. Length of Guiding Rule:17.7 inches / 450 mm. Miter Slot: 0.75 x 0.38 inches / 19 x 9.7 mm. Item Dimensions: 17.7 × 3 × 2.3 inches / 45 × 7.5 × 5.8 cm. Item Weight: 5 lbs / 2.2 kg. 1 x Miter Gauge. 2 x Allen Keys. Length of Guiding Rule:23.6in / 600 mm. Item Dimensions: 23.6 × 3 × 2.3 inches / 60 × 7.5 × 5.8 cm. Item Weight: 5.1 lbs / 2.3 kg. Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle. Compatible Slandered Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees. Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting. Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free. Wide Application: The table saw miter can improve the security and accuracy of the table saw and the router table. It can also be used for router tables and joiners. Miter gauge fence system is currently a must-have for every family. Possesses optimal versatility as a miter gauge fence, router or shaper fence and table saw sub-fence, chop or radial arm saw fence.
Rip Fence for Vintage Craftsman 9 Table Saw With 24 top Model 103.20002
Posted by adminDec 3
Rip Fence for Vintage Craftsman 9 Table Saw. From Model 103.20002. Fits 24 top good used condition. Shows signs of use Estate find. Check all pictures, the last one shows a similar machine it came off of. Be sure that your address is correct at checkout. If the address is wrong I will have to cancel the order. Take a look at my other auctions to see if there is anything else that you might be interested in.
Craftsman 2.7 HP Table Saw – Rip Fence Assy – OBSOLETE – #0BCH
Posted by adminDec 2
See photos for exact cosmetic condition, came from a working saw. Thanks for supporting my Canadian small business!
Craftsman 8 113. Series Table Saw Micro Adjust Rip Fence Fits 22 Table
Posted by adminDec 2
For consideration I have this Vintage Craftsman 8 113. Series Table Saw Micro Adjust Rip Fence as shown. Series 8″ saw with 22″ Tables. There is some minor saw rash as shown in the last photo.