For consideration i have this Craftsman Table Saw Geared Front Toothed Fence Rail as shown. Geared teeth are free of Chips/Cracks. Measures: 21 3/8 long. End mounting holes are 5 3/4″ apart and center ones are 5″ apart. It is marked as: 103-1-5514 T -3215.
1 x Miter Gauge Fence. Adjust angle can be 0-70°, up to 70 angles, wider using range. CNC wire-cut processing gear rack, one tooth one angle, more precision without shaking. With horizontal compensation device. Quick positioning at the bottom of common sizes(0°, 22.5°, 45°, 67.5°) 5. With scale magnifier, easy to set and read, can be removable. Extended 850mm: The main body length is 500mm, can reach 850mm. High Precision Fine Turning: High Precision Fine Turning, with a minimum adjustment accuracy of 0.002mm. Metric(mm) and imperial(inch) Scale: Double-sided scale, free switching. Can be cut without measuring and drawing lines. Inspect To examine or check for defects or problems. Right angle horizontal and safety clearance The requirement for a horizontal right angle and a minimum safe distance between moving parts and surrounding areas. Start zero setting The process of setting the initial position or reference point for the machine or tool. Positioning the extension crosscut fence The process of aligning and securing the extension crosscut fence to the main fence. Fine adjustment knob A control knob used for making precise adjustments to the machine or tool. Use of positioning pins The method of using pins or alignment features to ensure accurate and consistent cuts. Making a Sub Fence.
1 x Miter Gauge Fence. Adjust angle can be 0-70°, up to 70 angles, wider using range. CNC wire-cut processing gear rack, one tooth one angle, more precision without shaking. With horizontal compensation device. Quick positioning at the bottom of common sizes(0°, 22.5°, 45°, 67.5°) 5. With scale magnifier, easy to set and read, can be removable. Extended 850mm: The main body length is 500mm, can reach 850mm. High Precision Fine Turning: High Precision Fine Turning, with a minimum adjustment accuracy of 0.002mm. Metric(mm) and imperial(inch) Scale: Double-sided scale, free switching. Can be cut without measuring and drawing lines. Inspect To examine or check for defects or problems. Right angle horizontal and safety clearance The requirement for a horizontal right angle and a minimum safe distance between moving parts and surrounding areas. Start zero setting The process of setting the initial position or reference point for the machine or tool. Positioning the extension crosscut fence The process of aligning and securing the extension crosscut fence to the main fence. Fine adjustment knob A control knob used for making precise adjustments to the machine or tool. Use of positioning pins The method of using pins or alignment features to ensure accurate and consistent cuts. Making a Sub Fence.
Ryobi OEM 089037011704 replacement rip fence. Genuine, OEM Ryobi rip fence, part# 089037011704. Genuine, OEM Ryobi parts. This part is compatible with the following. Why Shop With Us? Power Tool Replacement Parts is the #1 source for Power Tool Parts & Accessories. Orders in the lower 48. Experts are standing by to help you. Why replace it when you can fix it? We only stock Genuine, OEM Replacement Parts. COMPANY INFO About Us.
RIP FENCE ONLY as shown! Will fit a set of Align-a rip 24/24 or 24/12 guide rails. 24/12 refers to 24″ of cuttable length (see your measuring tape on your guide rail) on the right side of the blade and 12″ on the left side of the blade. NOTE – an Align-a-rip fence will only fit an align-a-rip rail, it will NOT fit an Craftsman XR rail or XRC rail. For even more table saw parts!
This vintage King-Seely Sears Craftsman table fence and rail set is in decent condition. The locking lever actuates and the fence clamps down on the rail as it should. Suitable for restoration, or parts. As shown in photos, the original rail mounting machine screws are included. Part number on fence locking lever – 37428-103. Rail lengths: 17″ (main table) and 8-1/2″ (extension wing). This listing is for three (3) as shown in the photos. Please review images carefully, you will receive the items exactly as shown.
Excellent Aluminum Alloy Material: This table saw miter gauge fence is made of excellent aluminum alloy material, which is sturdy and wear resistant, not easy to be damaged, and has a long service life. High Accuracy: This table saw miter gauge fence features high accuracy, and the minimum adjustment accuracy is 0.002mm. Double Sided Scale: This table saw miter gauge fence features a double sided scale, with one metric side and one imperial side, which can be switched freely. Easy To Operate: This table saw fence is very easy to operate, you can align the scale as you need and cut without measuring and scribing. Wide Application: This table saw miter gauge fence is widely used for woodworking, modeling, DIY and furniture processing. Item Type: Table Saw Miter Gauge Fence Material: Aluminum Alloy Length Range: Approx. 0-850mm/0-33.46in Angle Range: 0-70 Degree. 1 x Table Saw Miter Gauge Fence. 2 x Hex Socket Screw. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
We bring original parts to professionals. Combining consumer focused innovation & leading manufacturing standards. Brand New and Original Milwaukee 28-35-0015 ASSEMBLED FENCE. This isn’t an aftermarket part or a replica but an original product manufactured by Milwaukee. This part is compatible with many tools including the models listed below. Milwaukee 2736-20-(J35A) M18 FUEL ONE KEY 8.25 TABLE SAW Cordless Saw. ToolpartsPro’s mission is to enhance the life of power tools making them a more valuable investment for craftsmen while contributing towards a green environment offering a formidable variety of spare parts at lowest prices and countrywide distribution. ToolpartsPro represents a wide range of brands including Makita, Milwaukee, Delta, Bosch, DeWalt, Black and Decker, Jet, Hitachi, Air Locker, Powermatic, Freud, Superior Parts, Superior Electric, Senco, and more. This may sound trivial but, in the long run certainly helps in keeping our beautiful world greener and healthier. Porter Cable Tool Parts. Lead time is specified with product information. Is used to fulfill your specific request. It is not disclosed to any third party in any way.
Package included: 1 x Block 1 x Tenon Features: – Extended 850mm : The main body length is 500mm, can reach 850mm. High Precision Fine Turning : High Precision Fine Turning, with a minimum adjustment accuracy of 0.002mm. Metric(mm) and imperial(inch) Scale : Double-sided scale, free switching. Can be cut without measuring and drawing lines. Inspect To examine or check for defects or problems. Right angle horizontal and safety clearance The requirement for a horizontal right angle and a minimum safe distance between moving parts and surrounding areas. Start zero setting The process of setting the initial position or reference point for the machine or tool. Positioning the extension crosscut fence The process of aligning and securing the extension crosscut fence to the main fence. Fine adjustment knob A control knob used for making precise adjustments to the machine or tool. Use of positioning pins The method of using pins or alignment features to ensure accurate and consistent cuts. Making a Sub Fence Users can make a wooden sub fence as required. Specifications: Product name: Miter Gauge Fence Material: Aluminum + Plastic Length range: 0-850 mm Angle range: 0-70 degrees.
