DURABLE ALUMINUM ALLOY: Made of excellent aluminum alloy, this miter rod has great strength and reliable durability and can be used for years without being abused 2. HIGH ACCURACY: The miter gauge fence system is accurate, well built and suitable for professional use, providing extremely high bevel accuracy 3. FLEXIBLE LOCKING: Miter gauge angle blocks enable accurate incremental control. The locking mechanism allow the rotating part to be locked at any angle 4. APPLICABLE TRACK: Table saw miter gauge system is applicable to 30mm or 45mm T track, very versatile 5. WITH FITTINGS: Table saw miter gauge fence system is equipped with push table handle, limit block, wrench, screws, nuts, and other fittings, easy for you to install and use, complete accessories guarantees convenient operation. Item Type: Table Saw Miter Gauge System Material: Aluminum alloy Screw Size: Approx. 6mm / 0.24in(M6) Standard Position Dimension: Width: 3/4inapprox. 19mm / 0.75in, Thick: 3/8inapprox. 9.5mm / 0.37in Suitable: For Approx. 30mm / 1.18in or 45mm / 1.77in T track. 1 x Push Table Handle. 1 x Limit Stop. 2 x Set Screw. 7 x Rubber Ring. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
DURABLE ALUMINUM ALLOY: Made of excellent aluminum alloy, this miter rod has great strength and reliable durability and can be used for years without being abused 2. HIGH ACCURACY: The miter gauge fence system is accurate, well built and suitable for professional use, providing extremely high bevel accuracy 3. FLEXIBLE LOCKING: Miter gauge angle blocks enable accurate incremental control. The locking mechanism allow the rotating part to be locked at any angle 4. APPLICABLE TRACK: Table saw miter gauge system is applicable to 30mm or 45mm T track, very versatile 5. WITH FITTINGS: Table saw miter gauge fence system is equipped with push table handle, limit block, wrench, screws, nuts, and other fittings, easy for you to install and use, complete accessories guarantees convenient operation. Item Type: Table Saw Miter Gauge System Material: Aluminum alloy Screw Size: Approx. 6mm / 0.24in(M6) Standard Position Dimension: Width: 3/4inapprox. 19mm / 0.75in, Thick: 3/8inapprox. 9.5mm / 0.37in Suitable: For Approx. 30mm / 1.18in or 45mm / 1.77in T track. 1 x Push Table Handle. 1 x Limit Stop. 2 x Set Screw. 7 x Rubber Ring. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
Excellent Aluminum Alloy Material: This table saw miter gauge fence is made of excellent aluminum alloy material, which is sturdy and wear resistant, not easy to be damaged, and has a long service life. High Accuracy: This table saw miter gauge fence features high accuracy, and the minimum adjustment accuracy is 0.002mm. Double Sided Scale: This table saw miter gauge fence features a double sided scale, with one metric side and one imperial side, which can be switched freely. Easy To Operate: This table saw fence is very easy to operate, you can align the scale as you need and cut without measuring and scribing. Wide Application: This table saw miter gauge fence is widely used for woodworking, modeling, DIY and furniture processing. Item Type: Table Saw Miter Gauge Fence Material: Aluminum Alloy Length Range: Approx. 0-850mm/0-33.46in Angle Range: 0-70 Degree. 1 x Table Saw Miter Gauge Fence. 2 x Hex Socket Screw. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
Hand Tools & Accessories. Power Tools & Accessories. VMTW 27 Position Precision Miter Gauge With Fence and Stop for Table Saw. With this Miter gage you get 27 Precision determined Stop Positions (every 5 degrees from 0 to 60 degrees in both directions plus two additional at 22.5 degrees, useful for 8 sided Octagons). Unlike the stock miter gage that comes with most equipment, this gage is designed for precise repeatable angles after it is dialed into your machine. The miter bar is designed for a snug fit in Machines with a 3/4 by 3/8 inch miter slot. It will also work with a 3/43/8 inverted T slot. The Three inch by 24 inch precision fence. Viking Mountain Tool Works. With then Miter gage you get 27 Precision determined Stop Positions every 5 degrees from 0 to 60 degrees in both directions plus two additional at 22.5 degrees, useful for 8 sided Octagons. The fence mounting slots in the protractor head are designed to work with our 24 inch precision aluminum fence with stop, our 18 inch Box Joint Fence, or most commercially available fences available from other manufactures. Made from heavy gage Aluminum and steel. Includes Instructions for the miter gage as well as the two fence options. The Fence and Stop are substantial and well made 24 inch nominal (23.6 actual) by 3 inch high for great work support. The curser on the Stop allows for precise repeatable measurements. View more great items! Add to Favorite Sellers. Sign up to Newsletter. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
Ridgid 15 Amp Corded 12 in. Dual Bevel Miter Saw with LED and 18V Cordless Compact Jobsite Blower with Inflator/Deflator Nozzle. Saw Includes: 12 in. Blade, Dust Bag, and Sliding Miter Fences. Compact Jobsite Blower: Powerful Motor for Fast Cleanup w/ 160MPH. Ridgid introduces the 15 Amp Corded 12 in. This saw’s dual bevel capability and adjustable miter table make it perfect for a wide range of cuts and applications. A powerful motor paired with best-in-class features provides ultimate convenience on any job site. This Compact Jobsite Blower has a powerful motor for fast and easy workspace cleanup It weighs 2.6 pounds, which helps prevent user fatigue during operation and makes it easy to store or transport. With registration, this kit includes a 15 Amp 12 in. Dual Bevel Miter Saw with LED, a 12 in. Blade and blade wrench, sliding miter fences, a dust bag, a work clamp, an 18V Cordless Compact Jobsite Blower with a nozzle, an inflator/deflator nozzle, and an operator’s manual. Amperage (A): 15 A. Bench & Stationary Tool Type: Compound Miter Saw. Bevel Type: Dual Bevel. Construction Material: Acrylonitrile Butadiene Styrene (ABS). Dust Collection Method: 2.5 in. Included Accessories: Allen Key/Wrench, Blade(s). Maximum Bevel Cut Angle – Left (degrees): 48 °. Maximum Bevel Cut Angle – Right (degrees): 48 °. Maximum Crosscut Capacity at 45 Degrees (L/R): 2 in x 6 in. Maximum Crosscut Capacity at 90 Degrees: 2 in x 8 in. Maximum Cutting Thickness in. Maximum Miter Cut Angle – Left (degrees): 50 °. Maximum Miter Cut Angle – Right (degrees): 50 °. Maximum Speed (RPM): 4000 RPM. Miter Saw Type: Compound. Power Tool Features: Positive Stops. Tools Product Type: Power Tool. Work Table Height From Floor in. Work Table Length in. Work Table Width in.
Cut through any project in no time! The VEVOR woodworking bandsaw is designed with a 6 in/13 in cutting height, 9.65 in/13.39 in cutting width, and a powerful motor. Cut confidently with the VEVOR bandsaw! Q: What are the maximum cutting height and throat width of the product? 9.65 in /. Q: Does the product have 2 speeds? What is the maximum horsepower of the product? No-load Speed: 480 RPM / 960 RPM or. 560 RPM-1100 RPM ±10%. 1/2 HP(370W) or. 1.5 HP(1100W). The product is easier to adjust speed. Q: Does the product have a stand or base? We provide 1 x stand cabinet assembly for 10 in 0.5 HP band saw. Q: Does the product have a work light? We have optimized the work light, and you can adjust it as needed. Q: What materials can the product cut? A: Our product can cut hardwood and softwood. Here, we provide you with 10 in 0.5 HP band saw, and 14 in 1 HP band saw. Impeccable Cutting Proficiency: Are you ready to cut into an unbelievable experience? The woodworking bandsaw can cut wood with a maximum cutting height of 6/13 inches. Throat Width: 9.65/13.39 in, Max. Sawblade Speed: 890/1050 m/min±10%. Speed Adjustable: The benchtop band saw comes with a high-performance motor that can deliver a powerful output while providing overheat protection for added security. The 10” band saw features an 1100 RPM maximum speed and 560 RPM minimum speed. The 14” bandsaw has a continuously variable speed control function, allowing users to easily adjust the speed from 480 RPM to 960 RPM. Multi-angle Cutting: The wood bandsaw features a tilting table that can be adjusted from 0 to 45°, allowing for more cutting flexibility. The sawtable size is 13.39 x 13.19 in/15.75 x 21.57 in, made of Q235 steel for added strength and durability. By tilting the table 45 degrees to the right, you can easily cut bevels with precision and ease. Optimized Light Position: It is designed with your everyday needs in mind. The work light’s position is flexible and easy to operate, so you can adjust it to illuminate specific work areas without worrying about any shadows or dark spots, allowing you to work with precision effortlessly. Save Space in No Time: The 10” tabletop bandsaw is equipped with a stand that raises the machine to a comfortable height for easier use. It also includes storage space, making it convenient for you to store your tools and keep them within reach. Connect a dust collector to the saw to keep your job site clean. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. All emails will be responded to within 12-24 hours.
Excellent Aluminum Alloy Material: This table saw miter gauge fence is made of excellent aluminum alloy material, which is sturdy and wear resistant, not easy to be damaged, and has a long service life. High Accuracy: This table saw miter gauge fence features high accuracy, and the minimum adjustment accuracy is 0.002mm. Double Sided Scale: This table saw miter gauge fence features a double sided scale, with one metric side and one imperial side, which can be switched freely. Easy To Operate: This table saw fence is very easy to operate, you can align the scale as you need and cut without measuring and scribing. Wide Application: This table saw miter gauge fence is widely used for woodworking, modeling, DIY and furniture processing. Item Type: Table Saw Miter Gauge Fence Material: Aluminum Alloy Length Range: Approx. 0-850mm/0-33.46in Angle Range: 0-70 Degree. 1 x Table Saw Miter Gauge Fence. 2 x Hex Socket Screw. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
Excellent Aluminum Alloy Material: This table saw miter gauge fence is made of excellent aluminum alloy material, which is sturdy and wear resistant, not easy to be damaged, and has a long service life. High Accuracy: This table saw miter gauge fence features high accuracy, and the minimum adjustment accuracy is 0.002mm. Double Sided Scale: This table saw miter gauge fence features a double sided scale, with one metric side and one imperial side, which can be switched freely. Easy To Operate: This table saw fence is very easy to operate, you can align the scale as you need and cut without measuring and scribing. Wide Application: This table saw miter gauge fence is widely used for woodworking, modeling, DIY and furniture processing. Item Type: Table Saw Miter Gauge Fence Material: Aluminum Alloy Length Range: Approx. 0-850mm/0-33.46in Angle Range: 0-70 Degree. 1 x Table Saw Miter Gauge Fence. 2 x Hex Socket Screw. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
Long Lasting: This miter gauge fence is a high performance woodworking angle tool, CNC machined and made of aluminium alloy for durability. High Accuracy: With accurate calibration and printed scales, this miter gauge fence is accurate and easy to read, saving installation time. T Track Connector: This miter gauge fence combines the length of the T track using the T track connector and can be extended to a longer capacity of the T track. Adjustable Limit Stops: The position of the limit stops of this miter gauge fence can be adjusted at will, parallel to the track, with limit stops. Wide Application: This miter gauge fence improves the safety and accuracy of table saws and router tables and is suitable for use with slide rule woodworking tools. Item Type: Miter Gauge Fence Material: Aluminum Alloy Colour: Red Use: For use with slide rule woodworking tools. 1 x Miter Gauge Fence. 2 x Fence Block. 2 x Limit Block. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
