The Table Saw Precision Miter Gauge System by POWERTEC. Box shows damage to top; product has been inspected and is New in Box. This 3-piece set was designed to provide you with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops and without calibrating. INCLUDES: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop. Function: Cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results. High precision miter gauge: Features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right. Multi-track miter fence: Smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4″-20 hex Bots, 1/4″ t-bolts and 5/16 T- bolts. Miter saw flip stop: Delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right. Set Contains the Following. (1) High Precision Miter Gauge. (1) Multi Track Fence with Scale (24 inch long by x 3 inch tall). (1) 3 inch T-Track Flip Stop (multi position). 27 angle indexing stops. A multi-functional 45 Degree setting. 4 expansion discs that adjust to remove all side play. A removable plates that can be used with t-track miter slots. Works in standard ¾” x 3/8″ miter slot, with or without t-slots. The gauge can be used as is, with a sacrificial fence, or with the included 24″ x 3″ multi -track fence. Laser engraved 24 scale, right to left. 24″ x 3″ tall multi-track (fence section). Made out of anodized extruded aluminum for strength and durability. Universal t-track slots that accept 1/4″-20 hex bots, 1/4″ t-bolts and 5/16 t- bolts. Possesses optimal versatility as a miter gauge fence, router or shaper fence and table saw sub-fence, chop or radial arm saw fence. Can work as a right or left stop. Tongue firmly locks into track to clamp down and prevent unnecessary movement. Anodized aluminum body and a move-able stop arm (measuring at 3″ x ¾”x 5/16). Puts the control in your hands, allowing you to set whether it works with the extruded fence face or you can set it to work with a sacrificial fence. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.
1 x Miter Gauge Fence. Adjust angle can be 0-70°, up to 70 angles, wider using range. CNC wire-cut processing gear rack, one tooth one angle, more precision without shaking. With horizontal compensation device. Quick positioning at the bottom of common sizes(0°, 22.5°, 45°, 67.5°) 5. With scale magnifier, easy to set and read, can be removable. Extended 850mm: The main body length is 500mm, can reach 850mm. High Precision Fine Turning: High Precision Fine Turning, with a minimum adjustment accuracy of 0.002mm. Metric(mm) and imperial(inch) Scale: Double-sided scale, free switching. Can be cut without measuring and drawing lines. Inspect To examine or check for defects or problems. Right angle horizontal and safety clearance The requirement for a horizontal right angle and a minimum safe distance between moving parts and surrounding areas. Start zero setting The process of setting the initial position or reference point for the machine or tool. Positioning the extension crosscut fence The process of aligning and securing the extension crosscut fence to the main fence. Fine adjustment knob A control knob used for making precise adjustments to the machine or tool. Use of positioning pins The method of using pins or alignment features to ensure accurate and consistent cuts. Making a Sub Fence.
PRS1015 Precision Router Table Fence. Premium Carpentry Tools: This router table fence is versatile, easy to install, and durable. Accurate Angles: This router fence stays parallel to a miter gauge thanks to the T-square adjustment system. Make Precise Cuts: Measuring scale allows fence to adjust to router bit; microadjuster wheel simplifies setup. Easily Adjustable: Router table fence easily slides with one hand; paddle lock and quarter-turn lock secures the fence. Premium Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome. Magnified measuring system with an adjustable measuring scale allows accurate setup with any bit. Independent Sliding Fence Faces. Can be positioned exactly where needed to provide workpiece support close to the bit. Just slide them into position behind the outfeed fence face. 38.75 x 4 x 8 inches. Global Trade Identification Number. Anodized-aluminum fence body, adjustable faces, T-square style saw carriage, micro-adjust wheel, jointing rods, measuring tape, dust-collection port, bit guard, assembly hardware, and owner’s manual. Product Dimensions: 4.0 inches x 38.75 inches x 8.0 inches. Weight: 6.5 lb. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Your satisfaction is guaranteed! All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. We will work with you to resolve any problem you may have.
Table Saw Precision Miter Gauge System Multi-Track Fence. Cross-cut and miter cut w/ featured stops and without calibration. Miter Gauge Features 27 angle indexing stops. Delivers exceptional cut-length control. This 3-piece set was designed to provide you with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops and without calibrating. Set Contains the Following: (1) High Precision Miter Gauge (1) Multi Track Fence with Scale (24 inch long by x 3 inch tall) (1) 3 T-Track Flip Stop (multi position) Miter Gauge Features. 27 angle indexing stops. A multi-functional 45 Degree setting. 4 expansion discs that adjust to remove all side play. A removable plates that can be used with t-track miter slots. Works in standard ¾” x 3/8″ miter slot, with or without t-slots. The gauge can be used as is, with a sacrificial fence, or with the included 24″ x 3″ multi -track fence Fence Features. Laser engraved 24 scale, right to left. 24″ x 3″ tall multi-track (fence section). Made out of anodized extruded aluminum for strength and durability. Universal t-track slots that accept 1/4″-20 hex bots, 1/4″ t-bolts and 5/16 t- bolts. Possesses optimal versatility as a miter gauge fence, router or shaper fence and table saw sub-fence, chop or radial arm saw fence Flip Stop Features. Can work as a right or left stop. Tongue firmly locks into track to clamp down and prevent unnecessary movement. Anodized aluminum body and a move-able stop arm (measuring at 3″ x ¾”x 5/16). Puts the control in your hands, allowing you to set whether it works with the extruded fence face or you can set it to work with a sacrificial fence. Includes: 1 table saw miter gauge, 1 multi-track miter fence, 1 T-track flip stop. Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while guaranteeing quick and accurate project results. High precision miter gauge: features 27 angle indexing stops with 1° step spacing and positive stops at 0°, 10°, 22-1/2°, 30° and 45° and 9 others, both left and right. Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4 in. 20 hex bots, 1/4 in. T-bolts and 5/16 in. Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right. Power Tool Accessory Type. 3.0 inches x 4.12 inches x 24.5 inches. Weight: 5.8 lb.
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 Degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop. 19 x 4.8 x 2.4 inches. The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs. The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs. 200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The head is mounted to a solid steel miter bar that measure 18 in length and is. Standard miter slots are 3/4″ x 3/8″ with a 1/8″ “T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8″ in diameter and is just shy of 1/8″ to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading. Fulton Precision Miter Gauge with Aluminum Miter Fence and Flip Stop. We’ve all done the research or at the very least heard about miter gauges with fence systems that are very accurate, easy to adjust and make cross cutting angles on your table saw super easy. While that all sounds great, all those great features usually costs a lot. That is until now! The Fulton Precision Miter Gauge with Aluminum Miter Fence and Flip Stop comes packed with all those great features and more. The best part is that it is reasonably priced so that most any woodworker can afford it! Be Precise with Ease. If you have ever used a factory supplied miter gauge, then you know how limiting it can be. The Fulton Miter Gauge with Aluminum Fence and Stop makes the angle cutting process a breeze. Once the gauge is set and the fence is properly adjusted, cross cutting angles on your table saw just became a whole lot easier than just using a miter gauge by itself. When this aluminum fence is used with the Fulton Miter Gauge, you’ll be able to repetitively cut angle stock all day long with precise results! When designing the fence for this system we kept having the same issue happen over and over again. The standard 90 degree end on most miter gauge fences made the fence to saw blade gap too large and the wood kept binding in that gap. Our solution was to simply cut the fence ends at a 45 degree angle so that the fence can get as close as possible to the blade with minimal stock over hang. This helps prevent binding and produces a much cleaner cut. Convenient Aluminum Flip Stop. Included with the fence and miter gauge is a convenient flip stop for making repetitive cuts. Simply slide the flip stop to the exact position you need it to be, lock it in place and you’re ready to go! When the stop is not needed you can either remove from the fence or simply lift the stop upwards and out of the way until it is needed. Accurate and Easy to Adjust. The Fulton Miter Gauge is loaded with great features. One of the more prominent features are the positive stops that are set to the most common angles used by woodworkers. Simply loosen the handle by rotating it counter clockwise, pull the spring loaded pin lock up and and adjust the miter gauge to the desired angle. Once you find your positive stop angle, release the lock pin so it locks the angle in place and re-secure the handle by rotating int clockwise until it is snug. If you want to use an angle that is not one of the positive stops, the pin lock can be pulled upward and rotated so that it won’t engage any of the positive stop holes. This allows you to adjust the miter gauge to any angle you need. Left Side, Right Side or Even Upside Down.. For the most part, we tend to cut on one side of our table saw the majority of the time. It usually depends on the saw or just simply preference. This is why we included two different sticky back (PSA pressure sensitive adhesive) tapes so you can choose which direction you need. We also know that some of use like to do things a little differently. If you are looking down at your miter fence from above then it may make sense for some of us to place the tape on to the aluminum fence upside down in relation to the miter gauge. This allows for you to be able to clearly read the measurements on the tape. Standard Size Miter Bar 3/4″ x 3/8″. The steel miter bar is mounted to the miter gauge and is the industry standard of 3/4″ x 3/8″. This means it will fit into most table slot miter slots. The miter bar also features spring loaded plungers that can be adjusted (with a hex key wrench) for just the right fit so you have a smooth push through every time. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.
All of our electronic products are designed and rated for use in the United States using 120 volt current. We advise you to use a reputable carrier service when returning your goods. Please check the Voltage information and make sure it matches the one in your country. In case it’s not stated in the description, do ask us. We guarantee that your issue will be solved quickly. We usually respond within 24 hours on weekdays. The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs. The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs. 200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The head is mounted to a solid steel miter bar that measure 18 in length and is. Standard miter slots are 3/4″ x 3/8″ with a 1/8″ “T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8″ in diameter and is just shy of 1/8″ to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading. Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled for. We do not accept P. BOXES – PLEASE PROVIDE A PHYSICAL ADDRESS.
NOT a unisaw fence… The unisaw fence is a large industrial fence. This is a more personal/consumer sized version of the same thing however it does NOT fit a Unisaw fence. For even more table saw parts!
1 x Miter Gauge Fence. Adjust angle can be 0-70°, up to 70 angles, wider using range. CNC wire-cut processing gear rack, one tooth one angle, more precision without shaking. With horizontal compensation device. Quick positioning at the bottom of common sizes(0°, 22.5°, 45°, 67.5°) 5. With scale magnifier, easy to set and read, can be removable. Extended 850mm: The main body length is 500mm, can reach 850mm. High Precision Fine Turning: High Precision Fine Turning, with a minimum adjustment accuracy of 0.002mm. Metric(mm) and imperial(inch) Scale: Double-sided scale, free switching. Can be cut without measuring and drawing lines. Inspect To examine or check for defects or problems. Right angle horizontal and safety clearance The requirement for a horizontal right angle and a minimum safe distance between moving parts and surrounding areas. Start zero setting The process of setting the initial position or reference point for the machine or tool. Positioning the extension crosscut fence The process of aligning and securing the extension crosscut fence to the main fence. Fine adjustment knob A control knob used for making precise adjustments to the machine or tool. Use of positioning pins The method of using pins or alignment features to ensure accurate and consistent cuts. Making a Sub Fence.
About 24 Product Description. 1 x Aluminum alloy protractor. 1 x Miter Bar. 1 x Clamp Handle. 1 x Aluminum Fence. 1 x Aluminum Flip Stop. 3 x Allen Wrenches (2mm, 4mm, 6mm). Precision Miter Gauge with Aluminum Miter Fence with 60° Angled Ends. Standard Size Miter Bar 3/4″ x 3/8″. Our this miter gauge made of premium quality aluminum alloy material with its surface treated by anodic oxidation, increase hardness and wear resistance for the product. The miter bar features with adjustable rubber ring that you can adjust with hex key wrench to better fit the table saw. Included with a convenient flip stop for making repetitive cuts and integrated aluminum alloy protractor with the features of 0.001 inch / 0.02mm high-accuracy. 24″ x 3″ miter fence with metric and imperial scale. Multi-functional 60° angle cuts, right to left. 3/4″ x 3/8″ standard miter slot or without t-slots. Flip stop firmly clamps on the fence when repetitive cuts. Anodized aluminum body has been deburred and smoothed. About 20″ to 36″ Product Description. 20″ to 36″ Telescoping Precision Miter Gauge with Aluminum Miter Fence with 60° Angled Ends. Telescoping miter fence with metric and imperial scale.
Premium Precision Miter Gauge with Aluminum Fence: Versatile Cut Solutions. High quality and economical solution for table saw cross cutting needs. Aluminum Miter fence with 45 degree ends for unsurpassed workpiece support. Includes aluminum flip stop for repetitive angled cuts. Alternative Carriers – We may use alternative carriers e. To ensure your package arrives safely and on time. Your feedback is extremely important to us. We strive to provide the best products and customer service possible. We are committed to resolving any problems and ensuring your satisfaction. Thank you for supporting our small family business!
