USED, TABLE SAW MITER GAGE. THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.
The Table Saw Precision Miter Gauge System by POWERTEC. Box shows damage to top; product has been inspected and is New in Box. This 3-piece set was designed to provide you with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops and without calibrating. INCLUDES: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop. Function: Cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results. High precision miter gauge: Features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right. Multi-track miter fence: Smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4″-20 hex Bots, 1/4″ t-bolts and 5/16 T- bolts. Miter saw flip stop: Delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right. Set Contains the Following. (1) High Precision Miter Gauge. (1) Multi Track Fence with Scale (24 inch long by x 3 inch tall). (1) 3 inch T-Track Flip Stop (multi position). 27 angle indexing stops. A multi-functional 45 Degree setting. 4 expansion discs that adjust to remove all side play. A removable plates that can be used with t-track miter slots. Works in standard ¾” x 3/8″ miter slot, with or without t-slots. The gauge can be used as is, with a sacrificial fence, or with the included 24″ x 3″ multi -track fence. Laser engraved 24 scale, right to left. 24″ x 3″ tall multi-track (fence section). Made out of anodized extruded aluminum for strength and durability. Universal t-track slots that accept 1/4″-20 hex bots, 1/4″ t-bolts and 5/16 t- bolts. Possesses optimal versatility as a miter gauge fence, router or shaper fence and table saw sub-fence, chop or radial arm saw fence. Can work as a right or left stop. Tongue firmly locks into track to clamp down and prevent unnecessary movement. Anodized aluminum body and a move-able stop arm (measuring at 3″ x ¾”x 5/16). Puts the control in your hands, allowing you to set whether it works with the extruded fence face or you can set it to work with a sacrificial fence. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.
USED, TABLE SAW MITER GAGE. THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.
This Aluminum Miter Gauge Fence Systemis a high-precision woodworking tool that can measure the angle of a miter joint. Most any miter gauge can be mounted to the aluminum miter fence, which is well thought out with its;unsurpassed workpiece mounting and support. The adjustable miter gauge body;has positive stops, which allows you to measure angles up to 90 degrees. This saw gauge also includes a handy 2-1/4 inch; aluminum flip stop for repetitive angled cuts on your table saw, which is convenient to your workflow. Versatile Perfect for wood cutting projects, the table saw guide is widely used by DIY enthusiast and woodworking professionals. It can be used for table saws, band saws, router planers, and lockstitch machines. This professional-style miter gauge is a great addition to your woodworking arsenal and can be used for a wide range of projects. Fits standard x 3/8 miter slots, with or without t-slotted miter slots. Premium Build The aluminum miter gauge system is designed for sturdiness and durability. The high-precision wood cutting system is equipped with scales intended for accuracy, project visibility, and to extend usability and service life. Package Contains (1) Miter Gauge with Knobs T-Bolts (1) Fence and Right to Left Tape Measure (1) 2-1/4 Fence Flip Stop (4) Extra Expansion Discs (1) Handle (1) Washer (1) 3 mm Hex Wrench (1) 2.5 mm Hex Wrench INCLUDES: (1) Aluminum Miter Gauge, (1) T-track Miter Fence, (1) SEA/Metric Scale, (1) T-track Flip Stop FUNCTION: With this economical table saw accessory, your cutting set-up will be more accurate and efficient when crosscutting wood at the 13 precise angle stops or at any custom stop within the miter range. FEATURES: Miter gauge fence can be set perpendicular to the table with an adjustment screw, a protractor style miter head with a spring loaded pin. Plus this angle cutting tool features accurate positive stops at 0, 22.5, 30, 45, 60, 67.5 and 90 degrees VERSATILE: The 2-1/4 fence flip stop quickly flips down for repeated cutting lengths. The flip arm can be moved from right to left to meet your feed direction requirements. Also, the universal t-track slots that accept 1/4″-20 hex bots, 1/4″ t-bolts and 5/16″ t- bolts, and T-track accessories Works in standard 3/4″ x 3/8″ miter slot, with or without t-slots, but will not work with smaller saws or tool with 5/8″ miter slots. PREMIUM: The aluminum miter bar, fence with precision scale, flip stop, and miter gauge body all possess a lightweight, yet heavy duty construction, intended to withstand the scratches and abrasive nature of woodworking and workshop usage.
This Aluminum Miter Gauge Fence Systemis a high-precision woodworking tool that can measure the angle of a miter joint. Most any miter gauge can be mounted to the aluminum miter fence, which is well thought out with its;unsurpassed workpiece mounting and support. The adjustable miter gauge body;has positive stops, which allows you to measure angles up to 90 degrees. This saw gauge also includes a handy 2-1/4 inch; aluminum flip stop for repetitive angled cuts on your table saw, which is convenient to your workflow. Versatile Perfect for wood cutting projects, the table saw guide is widely used by DIY enthusiast and woodworking professionals. It can be used for table saws, band saws, router planers, and lockstitch machines. This professional-style miter gauge is a great addition to your woodworking arsenal and can be used for a wide range of projects. Fits standard x 3/8 miter slots, with or without t-slotted miter slots. Premium Build The aluminum miter gauge system is designed for sturdiness and durability. The high-precision wood cutting system is equipped with scales intended for accuracy, project visibility, and to extend usability and service life. Package Contains (1) Miter Gauge with Knobs T-Bolts (1) Fence and Right to Left Tape Measure (1) 2-1/4 Fence Flip Stop (4) Extra Expansion Discs (1) Handle (1) Washer (1) 3 mm Hex Wrench (1) 2.5 mm Hex Wrench INCLUDES: (1) Aluminum Miter Gauge, (1) T-track Miter Fence, (1) SEA/Metric Scale, (1) T-track Flip Stop FUNCTION: With this economical table saw accessory, your cutting set-up will be more accurate and efficient when crosscutting wood at the 13 precise angle stops or at any custom stop within the miter range. FEATURES: Miter gauge fence can be set perpendicular to the table with an adjustment screw, a protractor style miter head with a spring loaded pin. Plus this angle cutting tool features accurate positive stops at 0, 22.5, 30, 45, 60, 67.5 and 90 degrees VERSATILE: The 2-1/4 fence flip stop quickly flips down for repeated cutting lengths. The flip arm can be moved from right to left to meet your feed direction requirements. Also, the universal t-track slots that accept 1/4″-20 hex bots, 1/4″ t-bolts and 5/16″ t- bolts, and T-track accessories Works in standard 3/4″ x 3/8″ miter slot, with or without t-slots, but will not work with smaller saws or tool with 5/8″ miter slots. PREMIUM: The aluminum miter bar, fence with precision scale, flip stop, and miter gauge body all possess a lightweight, yet heavy duty construction, intended to withstand the scratches and abrasive nature of woodworking and workshop usage.
1 x Miter Gauge Fence. Adjust angle can be 0-70°, up to 70 angles, wider using range. CNC wire-cut processing gear rack, one tooth one angle, more precision without shaking. With horizontal compensation device. Quick positioning at the bottom of common sizes(0°, 22.5°, 45°, 67.5°) 5. With scale magnifier, easy to set and read, can be removable. Extended 850mm: The main body length is 500mm, can reach 850mm. High Precision Fine Turning: High Precision Fine Turning, with a minimum adjustment accuracy of 0.002mm. Metric(mm) and imperial(inch) Scale: Double-sided scale, free switching. Can be cut without measuring and drawing lines. Inspect To examine or check for defects or problems. Right angle horizontal and safety clearance The requirement for a horizontal right angle and a minimum safe distance between moving parts and surrounding areas. Start zero setting The process of setting the initial position or reference point for the machine or tool. Positioning the extension crosscut fence The process of aligning and securing the extension crosscut fence to the main fence. Fine adjustment knob A control knob used for making precise adjustments to the machine or tool. Use of positioning pins The method of using pins or alignment features to ensure accurate and consistent cuts. Making a Sub Fence.
Cross-cut and miter cut w/ featured stops and without calibration. Miter Gauge Features 27 angle indexing stops. Delivers exceptional cut-length control. This 3-piece set was designed to provide you with everything you need to produce consistently accurate cross-cutting and miter cuts, with featured stops and without calibrating. Set Contains the Following: (1) High Precision Miter Gauge (1) Multi Track Fence with Scale (24 inch long by x 3 inch tall) (1) 3 T-Track Flip Stop (multi position) Miter Gauge Features. 27 angle indexing stops. A multi-functional 45 Degree setting. 4 expansion discs that adjust to remove all side play. A removable plates that can be used with t-track miter slots. Works in standard ¾” x 3/8″ miter slot, with or without t-slots. The gauge can be used as is, with a sacrificial fence, or with the included 24″ x 3″ multi -track fence Fence Features. Laser engraved 24 scale, right to left. 24″ x 3″ tall multi-track (fence section). Made out of anodized extruded aluminum for strength and durability. Universal t-track slots that accept 1/4″-20 hex bots, 1/4″ t-bolts and 5/16 t- bolts. Possesses optimal versatility as a miter gauge fence, router or shaper fence and table saw sub-fence, chop or radial arm saw fence Flip Stop Features. Can work as a right or left stop. Tongue firmly locks into track to clamp down and prevent unnecessary movement. Anodized aluminum body and a move-able stop arm (measuring at 3″ x ¾”x 5/16). Puts the control in your hands, allowing you to set whether it works with the extruded fence face or you can set it to work with a sacrificial fence. Ideally Used With: T-Track. Power Tool Accessory Type: Saw Accessories. Tools Product Type: Power Tool. Customer service is our top priority! Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. Thank you for shopping with us. We appreciate your business! If ordering electrical items outside of the U. Please note that they will come equipped with a standard U. You will need a suitable adapter to use the item in your country. An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. Only factory defects are accepted as a reason for a return. In the case of factory defects, if available, we will replace the product for you. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. We do our best to process as quickly as possible. Orders are processed immediately and dispatched to fulfillment as soon as they are received. For this reason, we are typically unable to honor cancellation requests. If the order has gone too far through the fulfillment process, we will be unable to cancel. Listed by Sku Fetch.
1 x Miter Gauge Fence. Adjust angle can be 0-70°, up to 70 angles, wider using range. CNC wire-cut processing gear rack, one tooth one angle, more precision without shaking. With horizontal compensation device. Quick positioning at the bottom of common sizes(0°, 22.5°, 45°, 67.5°) 5. With scale magnifier, easy to set and read, can be removable. Extended 850mm: The main body length is 500mm, can reach 850mm. High Precision Fine Turning: High Precision Fine Turning, with a minimum adjustment accuracy of 0.002mm. Metric(mm) and imperial(inch) Scale: Double-sided scale, free switching. Can be cut without measuring and drawing lines. Inspect To examine or check for defects or problems. Right angle horizontal and safety clearance The requirement for a horizontal right angle and a minimum safe distance between moving parts and surrounding areas. Start zero setting The process of setting the initial position or reference point for the machine or tool. Positioning the extension crosscut fence The process of aligning and securing the extension crosscut fence to the main fence. Fine adjustment knob A control knob used for making precise adjustments to the machine or tool. Use of positioning pins The method of using pins or alignment features to ensure accurate and consistent cuts. Making a Sub Fence.
1 x Miter Gauge Fence. Adjust angle can be 0-70°, up to 70 angles, wider using range. CNC wire-cut processing gear rack, one tooth one angle, more precision without shaking. With horizontal compensation device. Quick positioning at the bottom of common sizes(0°, 22.5°, 45°, 67.5°) 5. With scale magnifier, easy to set and read, can be removable. Extended 850mm: The main body length is 500mm, can reach 850mm. High Precision Fine Turning: High Precision Fine Turning, with a minimum adjustment accuracy of 0.002mm. Metric(mm) and imperial(inch) Scale: Double-sided scale, free switching. Can be cut without measuring and drawing lines. Inspect To examine or check for defects or problems. Right angle horizontal and safety clearance The requirement for a horizontal right angle and a minimum safe distance between moving parts and surrounding areas. Start zero setting The process of setting the initial position or reference point for the machine or tool. Positioning the extension crosscut fence The process of aligning and securing the extension crosscut fence to the main fence. Fine adjustment knob A control knob used for making precise adjustments to the machine or tool. Use of positioning pins The method of using pins or alignment features to ensure accurate and consistent cuts. Making a Sub Fence.
