Ridgid Table Saw Aluminum Fence Align-A-Rip Style 24 right 12 left 24/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 24 right 12 left 24/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 24 right 12 left 24/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 24 right 12 left 24/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 24 right 12 left 24/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 24 right 12 left 24/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 24 right 12 left 24/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 24 right 12 left 24/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 24 right 12 left 24/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 24 right 12 left 24/12

Note – there is one chip on the side of the fence head as shown in photo #3, however it does not affect the function. Ridgid 10 Table Saw 24. Rip Fence w/Guide Rails. For 27 deep tables only. Xxxxxx Craftsman models but they also must be 27 deep cast iron tops from front to back. 24/12 refers to 24″ rip width on the right side, 12″ rip width on the left side. Front rail measures 49-1/4 long as shown in photo. Includes required mounting hardware as shown… Those bolts slide along the rail so you can slide them for easy aligning with your top/wing holes. For even more table saw parts! The item “Ridgid Table Saw Aluminum Fence Align-A-Rip Style 24 right 12 left 24/12″ is in sale since Sunday, May 2, 2021. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “craigersandsons” and is located in McFarland, Wisconsin. This item can be shipped to United States, Canada.
  • Battery Included: No
  • Type: Table Saw
  • Brand: RIDGID
18 inch Sawstop Tablesaw Fence Rail Drawer. Fits Biesemeyer style fence rail

18 inch Sawstop Tablesaw Fence Rail Drawer. Fits Biesemeyer style fence rail

18 inch Sawstop Tablesaw Fence Rail Drawer. Fits Biesemeyer style fence rail

18 inch Sawstop Tablesaw Fence Rail Drawer. Fits Biesemeyer style fence rail

18 inch Sawstop Tablesaw Fence Rail Drawer. Fits Biesemeyer style fence rail

Tablesaw Fence Rail Drawer with rubber drawer liner. Drawer measures 18 inches long. Fits all tablesaws using the Biesemeyer T-Glide fence rail system with a 2 inch x 3 inch fence rail channel. Drawer includes a 1/8 inch thick rubber drawer liner. If the end of your 2 inch x 3 inch channel has a plastic end plug in it, simply remove and discard. The drawer will then slide into your fence rail. Great way to store pencil, push sticks, router bits and whatever you can fit into your drawer. The drawer itself measures 2 1/2 inches wide and 1 1/4 deep x 18 inches long. Fits many popular tablesaw brands such as Sawstop, Powermatic, Jet, Shopfox, Baleigh, Delta, Grizzly and many other using the 2 x 3 inch fence rail channel. This drawer will work on either end of your fence rail. The item “18 inch Sawstop Tablesaw Fence Rail Drawer. Fits Biesemeyer style fence rail” is in sale since Monday, February 22, 2021. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “gerry6290″ and is located in Mineral Point, Wisconsin. This item can be shipped worldwide.
  • Brand: Unbranded
  • Battery Included: No
  • Type: Table Saw
  • Number of Items in Set: 1
Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid 10 Table Saw. Rip Fence w/Guide Rails. For 27 deep tables only. Xxxxxx Craftsman models but they also must be 27 deep cast iron tops from front to back. 36/12 refers to 36″ rip width on the right side, 12″ rip width on the left side. Front rail measures 62-1/2 long as shown in photo. Includes required mounting hardware as shown. For even more table saw parts! The item “Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12″ is in sale since Tuesday, March 16, 2021. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “craigersandsons” and is located in McFarland, Wisconsin. This item can be shipped to United States, Canada.
  • Battery Included: No
  • Type: Table Saw
  • Brand: RIDGID
Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12

Ridgid 10 Table Saw. Rip Fence w/Guide Rails. For 27 deep tables only. Xxxxxx Craftsman models but they also must be 27 deep cast iron tops from front to back. 36/12 refers to 36″ rip width on the right side, 12″ rip width on the left side. Front rail measures 62-1/2 long as shown in photo. Includes required mounting hardware as shown. For even more table saw parts! The item “Ridgid Table Saw Aluminum Fence Align-A-Rip Style 36 right 12 left 36/12″ is in sale since Wednesday, March 10, 2021. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Table Saws”. The seller is “craigersandsons” and is located in McFarland, Wisconsin. This item can be shipped to United States, Canada.
  • Battery Included: No
  • Type: Table Saw
  • Brand: RIDGID
Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Complete Sears Craftsman Rip Fence System for 10″ Contractor Saws with 27″ Deep Tables. Micro adjust style rip fence assembly with two sets of rails that provide a 24 rip capacity on each side. The fence pinion gear and the front rail rack teeth are in excellent condition. All rails are 1 1/4″x 1 1/4″ angle. Front rails are 30 3/4″ long and the rear rails are 25 1/2″ long. Installation instructions, mounting fasteners, spacers, and brackets are included. Front Rail Racks: 818513. Fasteners and Spacers as shown. Fence was removed from a Model 113.298840 Craftsman 10″ Contractor Table Saw but will fit other Craftsman models and other brands with 27″ deep tables. The item “Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws” is in sale since Thursday, May 23, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Saws & Accessories\Table Saws”. The seller is “or1more” and is located in Lake Oswego, Oregon. This item can be shipped worldwide.
  • Capacity: 24″ Rip Capacity, left & right
  • Table Size: 27″ deep tables
  • Model: 113.xxxxxx
  • Country/Region of Manufacture: United States
  • Blade Diameter (in): 10
  • Type: Contractor Table Saw
  • MPN: 818353
  • Brand: Craftsman
Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

24″ Right of Blade & 24″ Left of Blade Rip Capacity. Complete Sears Craftsman Rip Fence System for 10″ Contractor Saws with 27″ Deep Tables. Micro adjust style rip fence assembly with two sets of rails that provide a 24 rip capacity on each side. The fence pinion gear and the front rail rack teeth are in excellent condition. All rails are 1 1/4″x 1 1/4″ angle. Front rails are 30 3/4″ long and the rear rails are 25 1/2″ long. Installation instructions, mounting fasteners, spacers, and brackets are included. Front Rail Racks: 818513. Fasteners and Spacers as shown. Fence was removed from a Model 113.298843 Craftsman 10″ Contractor Table Saw but will fit other Craftsman models and other brands with 27″ deep tables. 24 Rip Capacity, left & right. The item “Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws” is in sale since Thursday, February 21, 2019. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Saws & Accessories\Table Saws”. The seller is “or1more” and is located in Lake Oswego, Oregon. This item can be shipped worldwide.
  • Blade Diameter (in): 10
  • MPN: 818353
  • Brand: Craftsman
  • Table Size: 27″ deep tables
  • Country/Region of Manufacture: United States
  • Capacity: 24″ Rip Capacity, left & right
  • Model: 113.xxxxxx
  • Type: Contractor Table Saw
  • EAN: Does not apply
Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws

Complete Sears Craftsman Rip Fence System for 10″ Contractor Saws with 27″ Deep Tables. Micro adjust style rip fence assembly with two sets of rails that provide a 24 rip capacity on each side. The fence pinion gear and the front rail rack teeth are in excellent condition. All rails are 1 1/4″x 1 1/4″ angle. Front rails are 30 3/4″ long and the rear rails are 25 1/2″ long. Installation instructions, mounting fasteners, spacers, and brackets are included. Front Rail Racks: 818513. Fasteners and Spacers as shown. Fence was removed from a Model 113.298843 Craftsman 10″ Contractor Table Saw but will fit other Craftsman models and other brands with 27″ deep tables. The item “Sears Craftsman Micro-Adjust Style Rip Fence & Long Guide Rails 10 Table Saws” is in sale since Thursday, February 21, 2019. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Saws & Accessories\Table Saws”. The seller is “or1more” and is located in Lake Oswego, Oregon. This item can be shipped worldwide.
  • Brand: Craftsman
  • Model: 113.xxxxxx
  • MPN: 818353
  • Country/Region of Manufacture: United States
  • Capacity: 24″ Rip Capacity, left & right
  • Table Size: 27″ deep tables
  • Blade Diameter (in): 10
  • Type: Contractor Table Saw