Excellent Aluminum Alloy Material: This table saw miter gauge fence is made of excellent aluminum alloy material, which is sturdy and wear resistant, not easy to be damaged, and has a long service life. High Accuracy: This table saw miter gauge fence features high accuracy, and the minimum adjustment accuracy is 0.002mm. Double Sided Scale: This table saw miter gauge fence features a double sided scale, with one metric side and one imperial side, which can be switched freely. Easy To Operate: This table saw fence is very easy to operate, you can align the scale as you need and cut without measuring and scribing. Wide Application: This table saw miter gauge fence is widely used for woodworking, modeling, DIY and furniture processing. Item Type: Table Saw Miter Gauge Fence Material: Aluminum Alloy Length Range: Approx. 0-850mm/0-33.46in Angle Range: 0-70 Degree. 1 x Table Saw Miter Gauge Fence. 2 x Hex Socket Screw. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
Profile Fence Aluminum T-Slot Sliding Bracket Connector Router Woodworking Parts. It is made of aluminum alloy material, which is durable, wear resistance, weather resistance and corrosion resistance. The T-slot miter track is for strong strength and long durability. It can be used for fences and different kinds of woodworking projects like CNC, table saw, router table, etc. T-slot miter track length is about 40cm/50cm/60cm/80cm. It is a perfect accessory for woodworking. Miter track fence length: 40cm(15.75inch), 50cm(19.7inch), 60cm(23.6inch), 80cm(31.5inch). Function? Having a standard miter track combined with a mini t track allows you to use multiple jigs and fixtures at once or use for quick and easy change-outs. High Quality? Made of durable aluminium alloy material, which is durable, wear resistance, weather resistance and corrosion resistance. Size? T-slot miter track length is about 40cm(15.75inch), 50cm(19.7inch), 60cm(23.6inch), 80cm(31.5inch). The “T” slot accepts standard t-bars that won’t lift out of the track. Woodworking Tool? T-bars are excellent for fixtures that need to secured into the track for stationary purposes like featherboards or hold-downs. Application? Can be used for fences and different of woodworking projects like CNC, table saw, router table, etc.
INCRA MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence. Capitalizing On A Great Idea, The Folks At Incra Have Combined Their Highly Successful Miter 3000 With The Exclusive Angle lock Indexing System With A Sled System For The Table Saw. The Sled With T-Track And Clamping Fixture Secures The Work piece As One Solid Unit For Precision Cross-Cutting At Any Angle. The Right-Hand Portion Of The Sled, Once Cut, Secures To The Right Miter Slot Of Your Table Saw By Means Of A Miter Slider And Functions As A Zero Clearance Cut-Off Table That’s Perfectly Aligned With The Main Sled. Since This System Includes Precision Angle Adjustment, Stop Positioner And Clamping Sled For Superior Work piece Control, All Possibility For Cutting Error Has Been Eliminated And Each Cut Is Predictable And Precise. Finally, A Perfect Cross-Cutting System For Your Table Saw. Specifications:, Angle Lock:364 Angle Stops, Indexed Stops: Every 1/2 Degree Over + Or – 90 Degree Range, Special Stops:22-1/2 Degrees & 67-1/2 Degrees, Miter Head: Standard Plus Micro Plate, Glide lock Miter Bar: Width Is Adjustable In 10 Places, 36″-64″ telescoping Incra-Lock Flip Stop Fence, Incra; Incremental “Flip” Shop stop Positioner Order The Replacement Panel (H3602) For Maintaining Zero Clearance For Different Blades And Compound Angle Cutting. The Miter 5000 Table Saw Miter Gauge blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cut-off Fence. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that’s perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior work piece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Also featured with every Miter 5000 is a simple and incredibly useful hold down clamp which locks your work piece onto the sled for maximum accuracy and the cleanest cuts possible. Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near- standard miter gauge channels, including Delta, Craftsman, and imports. This means that all of Incra’s incredible precision will actually show up in your work because the bar won’t wiggle around in the miter slot. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-inch length. The dual flip shop stop and Incra’s patented automatic positioning control also come standard with this model. AngleLOCK Indexing Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2-degree increments over a full 180-degree range. Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. The fence locking bracket creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross- cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cuto-off Fence. Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near-standard miter gauge channels, including Delta, Craftsman, and imports. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-foot length. Executefunction(A) A. On’a:expander:toggle_description:toggle:collapse’, function(data) window. The sled with T-track and clamping fixture secures the workpiece as one solid unit for precision cross-cutting at any angle. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior workpiece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Finally, a perfect cross-cutting system for your table saw. Order the replacement Panel for maintaining zero clearance for different blades and compound angle cutting. Please see above for Miter3000 specifications. Capitalizing on a great idea, the folks at Incra. The sled with T-track and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The right-hand portion of the sled, once cut. Table saw that blends incremental angle control and a special 3-panel sled. Precision angle indexing teeth are laser cut in solid steel. 364 lock solid angle stops in 1/2-degree increments. Ten expansion disks adjust both sides of the bar for zero side play. Hold down clamp locks your work piece onto the sled. Blade Material: High Speed Steel. Power Source: Corded Electric. Blade Material:? High Speed Steel. Power Source:? Corded Electric. Special Feature:? Sled and Telescoping Fence. Product Dimensions:? 37.8″L x 25.9″W x 3.7H. Item Weight:? 31.4 Pounds. Blade Length:? 36 Inches. Number of Teeth:? 24. Cutting Angle:? 90 Degrees. Item Weight:? 31.4 pounds. Item model number:? MITER5000. Item Package Quantity:? 1. Special Features:? Sled and Telescoping Fence. Date First Available: September 1, 2004. Except on weekend or public holidays. We stand behind our products. Your receive the wrong item.
