Incra Miter 5000 Gauge With Telescoping Fence And Flip Shop Stop. The Miter 5000 blends the incremental angle control features of the Miter 3000SE with a special 3-panel sled for exceptional accuracy, capacity, and control. Panel cutting capacity on most saws plus T-tracks and a heavy duty hold down clamp for controlling small parts. Miter gauges don’t offer control or accuracy when pulled beyond the front of the saw, while the 5000 can crosscut 23 In. Plywood cabinet sides with ease on most full size 10 In. Telescoping IncraLOCK fence and flip shop stop have plenty of range for long boards. Sleds allow better control because the lumber isn’t sliding on the saw’s top, and they’re safer for small parts, too. The 5000 has aluminum T-tracks embedded in the MDF platform to secure the included heavy duty Build-It hold-down clamp. The sled can be set up on either the left side or right side of the blade, and a renewable drop panel provides zero clearance tearout control on both sides of the blade. 364 positive stop in 1/2 Deg Increments Extender fence telescopes from 36-64 In. GlideLock Miter bar adjusts to fit any standard table saw. Except on weekend or public holidays. We stand behind our products. Your receive the wrong item.
NEW, Incra Miter Combo Value Pack, 147374, Dock & Lock the included INCRA Miter Gauge in Seconds, Removable t-slot retaining clips & adjustable miter bar, GlideLOCK Miter Bar – The Miter 1000SE’s 6 expansion disks adjust both sides of the bar for ZERO sid, Special Edition Telescoping INCRA-LOCK Fence. NEW Incra Miter Combo Value Pack – 147374 by Incra. Dock & Lock the included INCRA Miter Gauge in Seconds. Removable t-slot retaining clips & adjustable miter bar. GlideLOCK Miter Bar – The Miter 1000SE’s 6 expansion disks adjust both sides of the bar for ZERO sid. Special Edition Telescoping INCRA-LOCK Fence. Special Edition 1/10th° Vernier Cursor UPC: 751922200527 PA34-05 incra, miter, sled, gauge, table saw.
Hand Tools & Accessories. Power Tools & Accessories. INCRA Wonder Fence 37 Stand Alone Router Fence for Woodworking. INCRA’S Wonder Fence is the heavy-duty, one-fence solution for all your routing operations, shaping, edge-forming and precision joinery. Since your work demands the utmost accuracy, INCRA has gone the extra mile with this tool. The split fence halves and base fence are machined flat to ensure a perfect woodworking surface — no warps, bends or bows. The offset adjustment wedges have been machined from solid blocks of aluminum to ensure precise offset adjustability. Setting up for split-fence operations has never been easier or more accurate. The infeed and outfeed fence halves are machined flat on their faces, and the opening is adjustable to handle different sized router bits, including the largest raised panel bits available. Hardware is also included for attaching wooden zero-clearance subfences for producing cleaner shaping cuts and for closing in the area around the router bit. With the fence halves slid completely together, you’ll see the familiar 1 square opening of the INCRA joinery fences while offering a continuous upper surface. As a result, the Wonder Fence is 100% compatible with the Jumbo Right Angle Fixture, INCRA ShopStop, and INCRA Stop accessories. The stand alone Wonder Fence 37 features all-aluminum construction, a built-in dust collection port with attachment elbow, split in-feed and out-feed fences, highrise fence cap for vertical panel raising, base fence, offset wedges, a laser-engraved offset scale, and table mounting clamps. This stand-alone version is designed to attach to any router table up to 37″ long, and the included table clamps grip the edges of any router table up to 1-3/8″ thick. Designed to attach to any router table up to 37″ long, and the included table clamps grip the edges of any router table up to 1-3/8″ thick. Infeed and outfeed fences independently adjustable in 2/1000″ steps over 1/8″ range. Each offset mechanism has its own cursor and scale marked off in 2/1000 increments. Lock-down offset permits gap adjustment; adjustable fence gap width to 4 1/2. Attaches to the INCRA TS-III Table Saw Fence, the INCRA LS Positioner and INCRA Jig Ultra or mounts directly to a router table as a free-standing fence (clamps included). View more great items. Jessem 02322 Rout-R-Lift Prestige Plunge Based Router Lift, Table and Fence Pkg. JessEm Mast-R-Lift Excel II Router Table Package. $1,129.97. JessEm 02121 Mast-R-Lift II Router Lift With 8-1/4 X 11-3/4 Opening For Smaller. Jasper Model 400-PRO Polycarbonate Plunge Router Circle cutting Guide. Add to Favorite Sellers. Sign up to Newsletter. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
Get the max savings on the INCRA Miter Gauge Combo Pack. The package includes the INCRA Miter 1000SE plus the INCRA Miter Express. This combination of two great INCRA crosscutting tools is incredibly practical and convenient. When mounted to the Miter Express, the Miter1000SE can easily crosscut 24 deep panels, offers the increased control of using a sled, and allows great safety for cutting small parts using the Miter Express’ heavy-duty hold-down clamp and T-slots that easily accommodate shop-made jigs and fixtures. The Miter 1000SE can also be removed from the Express sled in seconds and used by itself for quick solutions to a variety of operations, such as working at a router table or cutting bevels with the saw blade tilted. Dock & Lock the included INCRA Miter Gauge in Seconds. Removable t-slot retaining clips & adjustable miter bar. GlideLOCK Miter Bar – The Miter 1000SE’s 6 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard miter gauge channels. Special Edition Telescoping INCRA-LOCK Fence. Special Edition 1/10th° Vernier Cursor. Table size: For adequate support, the Miter Express requires a minimum of 11 from the side of the blade to either the left or right edges of the saw (sled can be installed on either side of the blade).
Get the max savings on the INCRA Miter Gauge Combo Pack. The package includes the INCRA Miter 1000SE plus the INCRA Miter Express. This combination of two great INCRA crosscutting tools is incredibly practical and convenient. When mounted to the Miter Express, the Miter1000SE can easily crosscut 24 deep panels, offers the increased control of using a sled, and allows great safety for cutting small parts using the Miter Express heavy-duty hold-down clamp and T-slots that easily accommodate shop-made jigs and fixtures. The Miter 1000SE can also be removed from the Express sled in seconds and used by itself for quick solutions to a variety of operations, such as working at a router table or cutting bevels with the saw blade tilted. Dock & Lock the included INCRA Miter Gauge in Seconds. Removable t-slot retaining clips & adjustable miter bar. GlideLOCK Miter Bar – The Miter 1000SE’s 6 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard miter gauge channels. Special Edition Telescoping INCRA-LOCK Fence. Special Edition 1/10th° Vernier Cursor. Table size: For adequate support, the Miter Express requires a minimum of 11 from the side of the blade to either the left or right edges of the saw (sled can be installed on either side of the blade).
INCRA MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence. Capitalizing On A Great Idea, The Folks At Incra Have Combined Their Highly Successful Miter 3000 With The Exclusive Angle lock Indexing System With A Sled System For The Table Saw. The Sled With T-Track And Clamping Fixture Secures The Work piece As One Solid Unit For Precision Cross-Cutting At Any Angle. The Right-Hand Portion Of The Sled, Once Cut, Secures To The Right Miter Slot Of Your Table Saw By Means Of A Miter Slider And Functions As A Zero Clearance Cut-Off Table That’s Perfectly Aligned With The Main Sled. Since This System Includes Precision Angle Adjustment, Stop Positioner And Clamping Sled For Superior Work piece Control, All Possibility For Cutting Error Has Been Eliminated And Each Cut Is Predictable And Precise. Finally, A Perfect Cross-Cutting System For Your Table Saw. Specifications:, Angle Lock:364 Angle Stops, Indexed Stops: Every 1/2 Degree Over + Or – 90 Degree Range, Special Stops:22-1/2 Degrees & 67-1/2 Degrees, Miter Head: Standard Plus Micro Plate, Glide lock Miter Bar: Width Is Adjustable In 10 Places, 36″-64″ telescoping Incra-Lock Flip Stop Fence, Incra; Incremental “Flip” Shop stop Positioner Order The Replacement Panel (H3602) For Maintaining Zero Clearance For Different Blades And Compound Angle Cutting. The Miter 5000 Table Saw Miter Gauge blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cut-off Fence. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that’s perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior work piece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Also featured with every Miter 5000 is a simple and incredibly useful hold down clamp which locks your work piece onto the sled for maximum accuracy and the cleanest cuts possible. Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near- standard miter gauge channels, including Delta, Craftsman, and imports. This means that all of Incra’s incredible precision will actually show up in your work because the bar won’t wiggle around in the miter slot. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-inch length. The dual flip shop stop and Incra’s patented automatic positioning control also come standard with this model. AngleLOCK Indexing Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2-degree increments over a full 180-degree range. Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. The fence locking bracket creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross- cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cuto-off Fence. Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near-standard miter gauge channels, including Delta, Craftsman, and imports. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-foot length. Executefunction(A) A. On’a:expander:toggle_description:toggle:collapse’, function(data) window. The sled with T-track and clamping fixture secures the workpiece as one solid unit for precision cross-cutting at any angle. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior workpiece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Finally, a perfect cross-cutting system for your table saw. Order the replacement Panel for maintaining zero clearance for different blades and compound angle cutting. Please see above for Miter3000 specifications. Capitalizing on a great idea, the folks at Incra. The sled with T-track and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The right-hand portion of the sled, once cut. Table saw that blends incremental angle control and a special 3-panel sled. Precision angle indexing teeth are laser cut in solid steel. 364 lock solid angle stops in 1/2-degree increments. Ten expansion disks adjust both sides of the bar for zero side play. Hold down clamp locks your work piece onto the sled. Blade Material: High Speed Steel. Power Source: Corded Electric. Blade Material:? High Speed Steel. Power Source:? Corded Electric. Special Feature:? Sled and Telescoping Fence. Product Dimensions:? 37.8″L x 25.9″W x 3.7H. Item Weight:? 31.4 Pounds. Blade Length:? 36 Inches. Number of Teeth:? 24. Cutting Angle:? 90 Degrees. Item Weight:? 31.4 pounds. Item model number:? MITER5000. Item Package Quantity:? 1. Special Features:? Sled and Telescoping Fence. Date First Available: September 1, 2004. Except on weekend or public holidays. We stand behind our products. Your receive the wrong item.
Hand Tools & Accessories. Power Tools & Accessories. INCRA MITER3000SE Miter Gauge, 27″ – 49″ Telescoping Fence & Flip Shop Stop. The Miter 3000 Special Edition builds on the outstanding platform provided by the Miter 3000. The Incra exclusive AngleLOCK Indexing System delivers 364 lock solid angle stops in 5, 1 and 1/2 increments over a full 180 range with continuous adjustability between all 1/2 settings. Combine this with the included GlideLOCK Miter Bar, Telescoping IncraLOCK Cuto-off Fence and the Incra Flip Shop Stop, and youll easily achieve mitering accuracy that you never thought possible. The Miter 3000SE by Incra delivers perfect, repeatable accuracy…. First time, Every time, Any angle. GlideLOCK Miter BarSix expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard miter gauge channels, including Delta, Craftsman, imports, etc. This means that all of INCRAs incredible precision will actually show up in your work because the bar CANT wiggle around in the miter slot. The Miter 3000s adjustable miter bar will fit square-sided miter slots measuring 3/4 wide, 3/8 deep, and with or without a 15/16 T-slot at the bottom. The miter bars adjustment range accommodates actual slot widths between 0.740 and 0.765. Special Edition Telescoping INCRA-LOCK FenceThis Special Edition Miter Fence telescopes from 27 to a full 49 length and features a front T-slot for adding a wooden zero-clearance sub fence. The Miter 3000SEs Flip Shop Stop is equipped with INC. View more great items. INCRA MITER1000/18T Miter Gauge with 18 Track Fence and Stop for Table Saws. INCRA MiterV120 Miter Gauge for Table & Band Saws, Router Tables & Sanders. Micro Jig GR-100 GRR-Ripper 3D Pushblock for Table Saw Safety. Big Horn 10226 Plastic Magnetic Push Stick (Yellow Handle with Black Stick). Add to Favorite Sellers. Sign up to Newsletter. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
This is a barely used Incra Miter 1000 Miter gauge that I bought new. Will include tool and unopenedhardware packs C-02 and. If you are looking for a great combination of basic affordability combined with unbeaten accuracy, the INCRA. Is a terrific choice. We combined a solid-steel laser cut protracter head with a gold anodized INCRA Track Fence and a red Stop Positioner. Our sliding scales fit perfectly in the top slot on the fence to make stop positioning easy, fast and accurate. Whether it’s your basic 90 degrees cut-off, simple pictures frames, complex compound miters, or a 20-sided object, the Miter1000 – by INCRA delivers perfect repeatable accuracy. First time – Every time – Any angle.
