Rockler’s Crosscut Sled For Table Saw: No more squinting at those tiny scales – this cross cut sled’s large protractor scale lets you precisely tune your angles for air-tight miters and crosscuts. Fit Your Saw Perfectly: The extra material of this cross cutting sled allows you to cut the sled down to fit your saw perfectly. The guidance booklet in our saw sled kit is available so you can make it your very own. Not compatible with DeWalt 7491RS jobsite saw Make Repetitive Cuts On Your Table Saw: Set your fence and feed each stock piece through the blade to achieve the same size each and every time. Our crosscut saw sled also has a right edge of sled functions as a zero-clearance chip breaker Extremely Durable: Our aluminum table saw sled runners are ideal for constant repetitive use. These table saw accessories do not absorb moisture and will not swell up over time due to exposure.
Introducing the Table Saw Small Parts Sled by. This small cross-cut sled allows you to cut work material pieces to length with your table saw. It keeps fingers clear of danger and lets you cut with confidence. Ideal for cutting dowels, stock and small shapes at a precise 90 ° angle, with little or no tear-out. The sled has zero clearance support, reducing the likelihood that small pieces will get stuck between the blade and the throat plate or fall through completely. The sled’s miter safety stop plate limits its forward movement. The drop-off is carried away from the blade by a small plastic ramp on side of the kerf. Premium Quality The components are made with a protective coated MDF and high quality aluminum to withstand the abrasive nature of woodworking and for long-term durability. Please Note: The table saw small parts sled is intended for use on table saws with a 3/4″ x 3/8″ miter slot. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry. INCLUDES: Table Sled Body and Zero Clearance Fence, Miter Slot Stop and Knobs, Miter Bar, Blade Guard, Screwdriver and Installation Hardware FUNCTION: This little sled is ideal for making high precision, small cuts on difficult woodworking projects with optimal safety for your fingers while cutting stock FEATURES: Adjustable rear-mounted blade guard fits most table saws, a fence and base that allows you to run the saw through the width of material that is removed during the cutting process 100% SAFETY: The sled also comes with a miter safety stop plate to prevent forward travel and is designed to keep your fingers clear of danger, allowing you to cut with confidence PREMIUM QUALITY: Most table saw small parts are made with high quality aluminum for durability; with an MDF zero clearance board.
INCRA Miter 5000 Mitering & Crosscut Sled. Blending the incremental angle control features of the Miter 3000SE Miter Gauge with a special 3-panel Sled, the INCRA Miter 5000 Mitering Sled gives you exceptional accuracy, capacity, and control when making cross and miter cuts on your table saw. Simple miter gauges don’t offer control or accuracy when pulled beyond the front of the saw. Sleds have better control because the lumber isn’t sliding on the saw’s top, plus they can handle much larger stock. The 5000 provides a panel cross cutting capacity of 20 to 25 inches on most full size 10 table saws, and the telescoping INCRALOCK Fence with Flip Shop Stop has huge 36 to 64 inch range to accommodate long boards. Aluminum T-tracks embedded in the MDF platform along with INCRA’s heavy duty Hold Down Clamp assure you can control small parts too. The sled can be set up on either the left side or right side of the blade (making it compatible with both right and left-tilt saws), and a renewable Drop Panel provides zero clearance tearout control on both sides of the blade. Other Features:AngleLOCK Indexing – Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2°, 1° or 5° increments over a full 180° range. It’s also continuously adjustable between 1/2° steps. Special Edition Telescoping INCRA-LOCK Fence – The fence not only telescopes from 36″ to a full 64″ length, it also includes the Dual Flip Shop Stop and INCRA’s patented Automatic Positioning Control. Additionally, the miter gauge head is equipped with INCRA’s SquarePERFECT Universal Fence Mounting Bracket for greatly improved cutting precision. Fence Locking Bracket – Creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment. GlideLOCK Miter Bar – Has 10 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard 3/4″ wide x 3/8″ miter gauge channels, including Delta, Craftsman, imports, etc. This means that all of INCRA’s incredible precision will actually show up in your work because the bar can’t wiggle around in the miter slot. INCRA Hold Down Clamp – Included with every Miter 5000 is this simple and incredibly useful Hold Down Clamp which locks your workpiece onto the sled for maximum accuracy and the cleanest cuts possible. It only takes seconds to use and provides the rigidity needed for world class results. INCRA Miter Slider – Included for static sled drop / cut off panel positioning.
18V Cordless Flooring Saw with Blade Miter Rip Crosscut Portable Tool Only. Makes Miter, Rip, and Crosscuts on LVT, Laminates and Hardwoods. Delivers Fast, Clean Cuts. Over 260 ONE+ Tools – All Work With Any RYOBI ONE+ 18V Battery. Expand your RYOBI 18V ONE+ System with the 18V 5-1/2 in. This Flooring Saw is capable of making miter, rip, and crosscuts on Luxury Vinyl Tile (LVT), Luxury Vinyl Planks (LVP), laminates, and hardwood flooring. This saw allows for extended periods of continuous work by cutting up to 240 lin. When paired with a 9.0 Ah battery (not included). It offers on-board storage for user convenience, while the integrated carry handle provides lightweight, cordless portability. Best of all, it is part of the RYOBI ONE+ System of over 260 cordless tools that all work on the same battery platform. The 18V 5-1/2 in. Flooring Saw includes a 24T thin kerf flooring blade, push stick, dust bag, blade wrenches, and an operator’s manual. Makes miter, rip and crosscuts on luxury vinyl tile (LVT), luxury vinyl planks (LVP), laminates and hardwood flooring. Cuts up to 240 lin. On a 9.0 Ah battery (not included). Includes a thin kerf flooring blade optimized for clean, fast cuts. Dust port compatible with 1-1/4 in. On-board storage of saw accessories for user convenience. Integrated carry handle and lightweight. Part of the RYOBI ONE+ system of over 260 cordless tools. Includes: 18V ONE+ 5-1/2 in. Flooring saw, 24T blade, blade wrenches, push stick, dust bag, rip fence, crosscut/miter fence, material clamp and operator’s manual. Bench & Stationary Tool Type. Acrylonitrile Butadiene Styrene (ABS). Hose Adaptor with Built-in Port. Allen Key/Wrench, Blade(s), Clamp, Miter Fence, Rip Fence. Maximum tile cut size diagonal (in). Maximum tile cut size rip (in). Work Table Height From Floor (in). Work Table Length (in). Work Table Width (in). We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Thank you for shopping at our store.
