INCRA Miter 5000 Mitering & Crosscut Sled. Blending the incremental angle control features of the Miter 3000SE Miter Gauge with a special 3-panel Sled, the INCRA Miter 5000 Mitering Sled gives you exceptional accuracy, capacity, and control when making cross and miter cuts on your table saw. Simple miter gauges don’t offer control or accuracy when pulled beyond the front of the saw. Sleds have better control because the lumber isn’t sliding on the saw’s top, plus they can handle much larger stock. The 5000 provides a panel cross cutting capacity of 20 to 25 inches on most full size 10 table saws, and the telescoping INCRALOCK Fence with Flip Shop Stop has huge 36 to 64 inch range to accommodate long boards. Aluminum T-tracks embedded in the MDF platform along with INCRA’s heavy duty Hold Down Clamp assure you can control small parts too. The sled can be set up on either the left side or right side of the blade (making it compatible with both right and left-tilt saws), and a renewable Drop Panel provides zero clearance tearout control on both sides of the blade. Other Features:AngleLOCK Indexing – Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2°, 1° or 5° increments over a full 180° range. It’s also continuously adjustable between 1/2° steps. Special Edition Telescoping INCRA-LOCK Fence – The fence not only telescopes from 36″ to a full 64″ length, it also includes the Dual Flip Shop Stop and INCRA’s patented Automatic Positioning Control. Additionally, the miter gauge head is equipped with INCRA’s SquarePERFECT Universal Fence Mounting Bracket for greatly improved cutting precision. Fence Locking Bracket – Creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment. GlideLOCK Miter Bar – Has 10 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard 3/4″ wide x 3/8″ miter gauge channels, including Delta, Craftsman, imports, etc. This means that all of INCRA’s incredible precision will actually show up in your work because the bar can’t wiggle around in the miter slot. INCRA Hold Down Clamp – Included with every Miter 5000 is this simple and incredibly useful Hold Down Clamp which locks your workpiece onto the sled for maximum accuracy and the cleanest cuts possible. It only takes seconds to use and provides the rigidity needed for world class results. INCRA Miter Slider – Included for static sled drop / cut off panel positioning.
INCRA MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence. Blade Material: High Speed Steel. Power Source: Corded Electric. Item Weight: 31.4 Pounds. Blade Length: 36 Inches. Item Dimensions L x W x H: 37.8″L x 25.9″W x 3.7H. Global Trade Identification Number: 05. Included Components: Incra Flip Shop Stop, GlideLOCK Miter Bar, Incra Hold Down Clamp, AngleLock Indexing. Cutting Angle: 90 Degrees. Number of Teeth: 24. Special Features: Sled and Telescoping Fence. Capitalizing on a great idea, the folks at Incra. The sled with T-track and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The right-hand portion of the sled, once cut. Table saw that blends incremental angle control and a special 3-panel sled. Precision angle indexing teeth are laser cut in solid steel. 364 lock solid angle stops in 1/2-degree increments. Ten expansion disks adjust both sides of the bar for zero side play. Hold down clamp locks your work piece onto the sled. Capitalizing On A Great Idea, The Folks At Incra Have Combined Their Highly Successful Miter 3000 With The Exclusive Angle lock Indexing System With A Sled System For The Table Saw. The Sled With T-Track And Clamping Fixture Secures The Work piece As One Solid Unit For Precision Cross-Cutting At Any Angle. The Right-Hand Portion Of The Sled, Once Cut, Secures To The Right Miter Slot Of Your Table Saw By Means Of A Miter Slider And Functions As A Zero Clearance Cut-Off Table That’s Perfectly Aligned With The Main Sled. Since This System Includes Precision Angle Adjustment, Stop Positioner And Clamping Sled For Superior Work piece Control, All Possibility For Cutting Error Has Been Eliminated And Each Cut Is Predictable And Precise. Finally, A Perfect Cross-Cutting System For Your Table Saw. Specifications:, Angle Lock:364 Angle Stops, Indexed Stops: Every 1/2 Degree Over + Or – 90 Degree Range, Special Stops:22-1/2 Degrees & 67-1/2 Degrees, Miter Head: Standard Plus Micro Plate, Glide lock Miter Bar: Width Is Adjustable In 10 Places, 36″-64″ telescoping Incra-Lock Flip Stop Fence, Incra; Incremental “Flip” Shop stop Positioner Order The Replacement Panel (H3602) For Maintaining Zero Clearance For Different Blades And Compound Angle Cutting. The Miter 5000 Table Saw Miter Gauge blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cut-off Fence. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that’s perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior work piece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Also featured with every Miter 5000 is a simple and incredibly useful hold down clamp which locks your work piece onto the sled for maximum accuracy and the cleanest cuts possible. Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near- standard miter gauge channels, including Delta, Craftsman, and imports. This means that all of Incra’s incredible precision will actually show up in your work because the bar won’t wiggle around in the miter slot. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-inch length. The dual flip shop stop and Incra’s patented automatic positioning control also come standard with this model. AngleLOCK Indexing Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2-degree increments over a full 180-degree range. Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. The fence locking bracket creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross- cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cuto-off Fence. Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near-standard miter gauge channels, including Delta, Craftsman, and imports. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-foot length. Executefunction(A) A. On’a:expander:toggle_description:toggle:collapse’, function(data) window. The sled with T-track and clamping fixture secures the workpiece as one solid unit for precision cross-cutting at any angle. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior workpiece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Finally, a perfect cross-cutting system for your table saw. Order the replacement Panel for maintaining zero clearance for different blades and compound angle cutting. Please see above for Miter3000 specifications. Your receive the wrong item.
INCRA MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence. Capitalizing On A Great Idea, The Folks At Incra Have Combined Their Highly Successful Miter 3000 With The Exclusive Angle lock Indexing System With A Sled System For The Table Saw. The Sled With T-Track And Clamping Fixture Secures The Work piece As One Solid Unit For Precision Cross-Cutting At Any Angle. The Right-Hand Portion Of The Sled, Once Cut, Secures To The Right Miter Slot Of Your Table Saw By Means Of A Miter Slider And Functions As A Zero Clearance Cut-Off Table That’s Perfectly Aligned With The Main Sled. Since This System Includes Precision Angle Adjustment, Stop Positioner And Clamping Sled For Superior Work piece Control, All Possibility For Cutting Error Has Been Eliminated And Each Cut Is Predictable And Precise. Finally, A Perfect Cross-Cutting System For Your Table Saw. Specifications:, Angle Lock:364 Angle Stops, Indexed Stops: Every 1/2 Degree Over + Or – 90 Degree Range, Special Stops:22-1/2 Degrees & 67-1/2 Degrees, Miter Head: Standard Plus Micro Plate, Glide lock Miter Bar: Width Is Adjustable In 10 Places, 36″-64″ telescoping Incra-Lock Flip Stop Fence, Incra; Incremental “Flip” Shop stop Positioner Order The Replacement Panel (H3602) For Maintaining Zero Clearance For Different Blades And Compound Angle Cutting. The Miter 5000 Table Saw Miter Gauge blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cut-off Fence. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that’s perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior work piece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Also featured with every Miter 5000 is a simple and incredibly useful hold down clamp which locks your work piece onto the sled for maximum accuracy and the cleanest cuts possible. Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near- standard miter gauge channels, including Delta, Craftsman, and imports. This means that all of Incra’s incredible precision will actually show up in your work because the bar won’t wiggle around in the miter slot. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-inch length. The dual flip shop stop and Incra’s patented automatic positioning control also come standard with this model. AngleLOCK Indexing Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2-degree increments over a full 180-degree range. Interlocking grooves in the fence and stop ensure even the sharp edge of mitered work will not push behind the stop. The fence locking bracket creates a monolithic rigid platform and fence when tightened down. Quickly set using the included standard hex tool, this feature takes an already strong platform into the rigidity level expected in any professional machining environment. The sled with two aluminum T-tracks and clamping fixture secures the work piece as one solid unit for precision cross- cutting at any angle. The tracks are embedded in the MDF panel top to secure an included work piece hold-down clamp and to provide absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cuto-off Fence. Ten expansion disks adjust both sides of the bar for zero side play, anti-friction travel on all table saws with standard 3/4-by-3/8-inch or near-standard miter gauge channels, including Delta, Craftsman, and imports. Also included are Special Edition Miter Fence telescopes from 18- to a full 31-foot length. Executefunction(A) A. On’a:expander:toggle_description:toggle:collapse’, function(data) window. The sled with T-track and clamping fixture secures the workpiece as one solid unit for precision cross-cutting at any angle. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior workpiece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Finally, a perfect cross-cutting system for your table saw. Order the replacement Panel for maintaining zero clearance for different blades and compound angle cutting. Please see above for Miter3000 specifications. Capitalizing on a great idea, the folks at Incra. The sled with T-track and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle. The right-hand portion of the sled, once cut. Table saw that blends incremental angle control and a special 3-panel sled. Precision angle indexing teeth are laser cut in solid steel. 364 lock solid angle stops in 1/2-degree increments. Ten expansion disks adjust both sides of the bar for zero side play. Hold down clamp locks your work piece onto the sled. Blade Material: High Speed Steel. Power Source: Corded Electric. Blade Material:? High Speed Steel. Power Source:? Corded Electric. Special Feature:? Sled and Telescoping Fence. Product Dimensions:? 37.8″L x 25.9″W x 3.7H. Item Weight:? 31.4 Pounds. Blade Length:? 36 Inches. Number of Teeth:? 24. Cutting Angle:? 90 Degrees. Item Weight:? 31.4 pounds. Item model number:? MITER5000. Item Package Quantity:? 1. Special Features:? Sled and Telescoping Fence. Date First Available: September 1, 2004. Except on weekend or public holidays. We stand behind our products. Your receive the wrong item.
Introducing the Table Saw Small Parts Sled by POWERTEC. INCLUDES: Table Sled Body and Zero Clearance Fence, Miter Slot Stop and Knobs, Miter Bar, Blade Guard, Screwdriver and Installation Hardware. FUNCTION: This little sled is ideal for making high precision, small cuts on difficult woodworking projects with optimal safety for your fingers while cutting stock. FEATURES: Adjustable rear-mounted blade guard fits most table saws, a fence and base that allows you to run the saw through the width of material that is removed during the cutting process. 100% SAFETY: The sled also comes with a miter safety stop plate to prevent forward travel and is designed to keep your fingers clear of danger, allowing you to cut with confidence. PREMIUM QUALITY: Most table saw small parts are made with high quality aluminum for durability; with an MDF zero clearance board. This small cross-cut sled allows you to cut work material pieces to length with your table saw. It keeps fingers clear of danger and lets you cut with confidence. Ideal for cutting dowels, stock and small shapes at a precise 90 ° angle, with little or no tear-out. The sled has zero clearance support, reducing the likelihood that small pieces will get stuck between the blade and the throat plate or fall through completely. The sled’s miter safety stop plate limits its forward movement. The drop-off is carried away from the blade by a small plastic ramp on one side of the kerf. The components are made with a protective coated MDF and high quality aluminum to withstand the abrasive nature of woodworking and for long-term durability. Please Note: The table saw small parts sled is intended for use on table saws with a 3/4″ x 3/8″ miter slot. MDF Zero Clearance Insert. Miter Safety Stop Plate with Star Knob. Hardware Bolts and Flat Screws. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.
