Archive for the ‘ read ’ Category

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

Author: admin

Apr 25

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

GUIDE RAILS ONLY, exactly as shown. Condition is good overall! NOTE – There is a blade cut into the far right end of the front rail as shown in the photos. If this bothers you, you could cut that small end piece all the way off. Includes required mounting hardware as shown. 24/12 refers to 24″ rip width on the right side, 12″ rip width on the left side. Note – this will NOT work with a Craftsman XR-2412 or a XR-2424 or a XRC system. It will only work with an Align a Rip 24/12 or 24/24 rip fence. If you need a complete system or other table saw parts, visit my. For even more options!
Comments Off
Filed under: read | Tagged as: , , , , , ,

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

Author: admin

Apr 16

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

READ Craftsman Table Saw Align-A-Rip 24/12 GUIDE RAILS ONLY

GUIDE RAILS ONLY, exactly as shown. Condition is good overall! NOTE – There is a blade cut into the far right end of the front rail as shown in the photos. If this bothers you, you could cut that small end piece all the way off. Includes required mounting hardware as shown. 24/12 refers to 24″ rip width on the right side, 12″ rip width on the left side. Note – this will NOT work with a Craftsman XR-2412 or a XR-2424 or a XRC system. It will only work with an Align a Rip 24/12 or 24/24 rip fence. If you need a complete system or other table saw parts, visit my. For even more options!
Comments Off
Filed under: read | Tagged as: , , , , , ,

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

Author: admin

Jan 23

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

In good used condition. Look at the pictures to evaluate the overall condition.
Comments Off
Filed under: read | Tagged as: , , , , , , ,

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

Author: admin

Jan 8

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

READ Ryobi 10 Table Saw BT3000 BT3100 Sliding Miter (missing miter fence)

NOTE – missing the miter fence… If you need that part as well, checkout my other options by clicking this link. For even more table saw parts.
Comments Off
Filed under: read | Tagged as: , , , , , , , ,

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

Author: admin

Dec 21

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

READ Craftsman XR-2412 or XR-2424 Table Saw Aluminum RIP FENCE ONLY

Some blade rash as shown in the photo, however many people choose to bolt a piece of wood or plexiglass/etc to the side of the rip fence for a nice clean/smooth edge to slide your board along. NOTE – 2424 refers to 24″ rip width on the right side, 24″ rip width on the left side. However that’s referring to the GUIDE RAILS… NOT the rip fence itself. As such, this rip fence will also work just fine in place of a XR2412 fence. NOTE – THIS RIP FENCE IS NOT A SUBSTITUTE FOR THE XRC RIP FENCE OR THE. Align-a-Rip 24/12 or Align-a-rip 24/24 AS THOSE RAILS HAVE A DIFFERENT PROFILE. For even more table saw parts!
Comments Off
Filed under: read | Tagged as: , , , , , , ,

READ Craftsman Table Saw Rip Fence for 27 deep top Parts 6417 6415 6162 T-8836

Author: admin

Dec 19

READ Craftsman Table Saw Rip Fence for 27 deep top Parts 6417 6415 6162 T-8836

READ Craftsman Table Saw Rip Fence for 27 deep top Parts 6417 6415 6162 T-8836

READ Craftsman Table Saw Rip Fence for 27 deep top Parts 6417 6415 6162 T-8836

READ Craftsman Table Saw Rip Fence for 27 deep top Parts 6417 6415 6162 T-8836

READ Craftsman Table Saw Rip Fence for 27 deep top Parts 6417 6415 6162 T-8836

READ Craftsman Table Saw Rip Fence for 27 deep top Parts 6417 6415 6162 T-8836

READ Craftsman Table Saw Rip Fence for 27 deep top Parts 6417 6415 6162 T-8836

READ Craftsman Table Saw Rip Fence for 27 deep top Parts 6417 6415 6162 T-8836

READ Craftsman Table Saw Rip Fence for 27 deep top Parts 6417 6415 6162 T-8836

Came off a working table saw. Good condition, exactly as shown! Some slight blade rash as shown in the photo, however note the factor drilled holes on the side which are there so you can easily mount a board or a piece of nylon/plexiglass/etc so you have a nice smooth edge to glide along. NOTE – some older model craftsmans have a 27″ deep cast iron top (not including the rail) and some are only 22″ or 20 deep. THIS ONE IS FOR A 27 DEPE TOP. From a working 113.29991 table saw. There are several other models it will… Find your manual online to confirm it’s the correct part for your saw. NOTE – this older style fence only uses a front rail… The rip fence simply clamps against the back of the top and the back of the wings. Visit my online shop. For even more table saw parts!
Comments Off
Filed under: read | Tagged as: , , , , , ,

READ Powermatic 63 Table Saw RIP FENCE ONLY labeled as Vega Rip Fence System

Author: admin

Nov 23

READ Powermatic 63 Table Saw RIP FENCE ONLY labeled as Vega Rip Fence System

READ Powermatic 63 Table Saw RIP FENCE ONLY labeled as Vega Rip Fence System

READ Powermatic 63 Table Saw RIP FENCE ONLY labeled as Vega Rip Fence System

READ Powermatic 63 Table Saw RIP FENCE ONLY labeled as Vega Rip Fence System

READ Powermatic 63 Table Saw RIP FENCE ONLY labeled as Vega Rip Fence System

READ Powermatic 63 Table Saw RIP FENCE ONLY labeled as Vega Rip Fence System

READ Powermatic 63 Table Saw RIP FENCE ONLY labeled as Vega Rip Fence System

READ Powermatic 63 Table Saw RIP FENCE ONLY labeled as Vega Rip Fence System

READ Powermatic 63 Table Saw RIP FENCE ONLY labeled as Vega Rip Fence System

READ Powermatic 63 Table Saw RIP FENCE ONLY labeled as Vega Rip Fence System

From a working Powermatic 63. See the photos for measurements and details. For even more table saw parts!
Comments Off
Filed under: read | Tagged as: , , , , , , ,

READ Craftsman Table Saw XR-2412 RIP FENCE ONLY

Author: admin

Oct 29

READ Craftsman Table Saw XR-2412 RIP FENCE ONLY

READ Craftsman Table Saw XR-2412 RIP FENCE ONLY

READ Craftsman Table Saw XR-2412 RIP FENCE ONLY

READ Craftsman Table Saw XR-2412 RIP FENCE ONLY

READ Craftsman Table Saw XR-2412 RIP FENCE ONLY

READ Craftsman Table Saw XR-2412 RIP FENCE ONLY

READ Craftsman Table Saw XR-2412 RIP FENCE ONLY

RIP FENCE ONLY, exactly as shown. These rails will work with the Craftsman XR-2412 or a XR-2424 guide rails. It will NOT work with an Align a Rip 24/12, an Align a rip 24/24 or an XRC guide rails. If you need a complete system or other table saw parts, visit my. For even more options!
Comments Off
Filed under: read | Tagged as: , , , , ,

READ Delta Unifence Table Saw Guide Rip Fence Assembly Unisaw 422-27-012-xxxx

Author: admin

Sep 25

READ Delta Unifence Table Saw Guide Rip Fence Assembly Unisaw 422-27-012-xxxx

READ Delta Unifence Table Saw Guide Rip Fence Assembly Unisaw 422-27-012-xxxx

READ Delta Unifence Table Saw Guide Rip Fence Assembly Unisaw 422-27-012-xxxx

READ Delta Unifence Table Saw Guide Rip Fence Assembly Unisaw 422-27-012-xxxx

READ Delta Unifence Table Saw Guide Rip Fence Assembly Unisaw 422-27-012-xxxx

READ Delta Unifence Table Saw Guide Rip Fence Assembly Unisaw 422-27-012-xxxx

READ Delta Unifence Table Saw Guide Rip Fence Assembly Unisaw 422-27-012-xxxx

READ Delta Unifence Table Saw Guide Rip Fence Assembly Unisaw 422-27-012-xxxx

READ Delta Unifence Table Saw Guide Rip Fence Assembly Unisaw 422-27-012-xxxx

READ Delta Unifence Table Saw Guide Rip Fence Assembly Unisaw 422-27-012-xxxx

NOTE – the plastic indicator “glass” that shows where you are on the guide rail is broken/missing. See photos for details. Fits a Unisaw Fence that is. 3.4 inches wide. 1-3/4 tall on the front/narrow end. About 2 tall on the back/wider end. For even more table saw parts!
Comments Off
Filed under: read | Tagged as: , , , , , , , ,

READ Delta Unifence 33-1/2 Guide for Table Saw Rip Fence

Author: admin

Sep 20

READ Delta Unifence 33-1/2 Guide for Table Saw Rip Fence

READ Delta Unifence 33-1/2 Guide for Table Saw Rip Fence

READ Delta Unifence 33-1/2 Guide for Table Saw Rip Fence

READ Delta Unifence 33-1/2 Guide for Table Saw Rip Fence

READ Delta Unifence 33-1/2 Guide for Table Saw Rip Fence

READ Delta Unifence 33-1/2 Guide for Table Saw Rip Fence

READ Delta Unifence 33-1/2 Guide for Table Saw Rip Fence

READ Delta Unifence 33-1/2 Guide for Table Saw Rip Fence

READ Delta Unifence 33-1/2 Guide for Table Saw Rip Fence

Rip fence guide for attaching to your rip fence assembly. Perfect for those missing their guide for their rip fence. This is the part you slide your wood along. If you need other unisaw fence parts v. For even more table saw parts!
Comments Off
Filed under: read | Tagged as: , , , , , ,
View more posts »