Will fit any Sears Craftsman Rip Fence System for Saws with 27 deep cast iron tops (when measured from front to back). Includes rip fence only. Must have the 1-1/4 thick guide rails on front and back. If you need the 1-1/4 guide rails as well visit my online shop. For full fence + guide rail options. Does NOT fit a 137. Visit my online shop. For even more table saw parts!
From a working Powermatic 63. See the photos for measurements and details. There’s a small chip to the plastic in the handle, as shown in photo #2. For even more table saw parts!
Condition is good, exactly as shown! NOTE – includes the fence AND the bracket that attaches this to the sliding platform. These are frequently lost… For even more table saw parts.
GUIDE RAILS ONLY, exactly as shown. Condition is good overall! Includes required mounting hardware as shown. 24/12 refers to 24″ rip width on the right side, 12″ rip width on the left side. Note – this will NOT work with a Craftsman XR-2412 or a XR-2424 or a XRC system. It will only work with an Align a Rip 24/12 or 24/24 rip fence.
Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories – RK7323. Portable tabletop saw sets up in seconds to cut wood, metal, tile, aluminum and plastic – performs rip, scroll, miter, and inside cuts. Compact and portable with built-in tabletop handle to carry anywhere Â- weighs in at less than 15 pounds. No-Load Speed – 3000/minute. The Bladerunner X2 cuts a variety of materials depending on the type of blade you’re using. Pick the blade that best suits the job, from scroll cutting, to rip cuts, the Bladerunner’s cutting capacity will vary depending on the material Wood- 1-1/2 Inch. PVC pipe- 1-1/4 Inch. Hold-down guard and splitter cuts wider material, and a larger rip fence for better control and a nice, accurate cut. Table Size- 15-3/4 x 17 Inches. Instant, tool-free blade changes; change the blade in 3 seconds – compatible with any 4 t-shank jigsaw blades. Stroke Length:3/4 inches. Power Input:5.5 Amps. THANK YOU AND HAVE A GREAT DAY!
Fits a Vintage Craftsman 113.27610 or 113.29920 Table Saw, which has a 27 deep cast iron top (not including the front rail). NOTE, it will NOT fit a saw with a 20″ or 22″ cast iron top. You’ll need your own geared front rail to match this item. For sale separately I have the main rail. As well as a side rail. Visit my online shop. For even more table saw parts!
Fits a Sears Craftsman 113.29940 Table Saw. The adjustment knob on the bottom of the rip fence has been broken off (see pictures). Please check the condition description and the pictures to know what you are purchasing.
GUIDE RAILS ONLY, exactly as shown. Condition is good overall! NOTE – There is a blade cut into the far right end of the front rail as shown in the photos. If this bothers you, you could cut that small end piece all the way off. Includes required mounting hardware as shown. 24/12 refers to 24″ rip width on the right side, 12″ rip width on the left side. Note – this will NOT work with a Craftsman XR-2412 or a XR-2424 or a XRC system. It will only work with an Align a Rip 24/12 or 24/24 rip fence. If you need a complete system or other table saw parts, visit my. For even more options!
GUIDE RAILS ONLY, exactly as shown. Condition is good overall! NOTE – There is a blade cut into the far right end of the front rail as shown in the photos. If this bothers you, you could cut that small end piece all the way off. Includes required mounting hardware as shown. 24/12 refers to 24″ rip width on the right side, 12″ rip width on the left side. Note – this will NOT work with a Craftsman XR-2412 or a XR-2424 or a XRC system. It will only work with an Align a Rip 24/12 or 24/24 rip fence. If you need a complete system or other table saw parts, visit my. For even more options!
